diff mbox series

[v2,4/6] drm/panel: sitronix-st7789v: Clarify a definition

Message ID 20230616163255.2804163-5-miquel.raynal@bootlin.com (mailing list archive)
State New, archived
Headers show
Series drm/panel: sitronix-st7789v: Support ET028013DMA panel | expand

Commit Message

Miquel Raynal June 16, 2023, 4:32 p.m. UTC
The Sitronix datasheet explains BIT(1) of the RGBCTRL register as the
DOTCLK/PCLK edge used to sample the data lines:

    “0” The data is input on the positive edge of DOTCLK
    “1” The data is input on the negative edge of DOTCLK

IOW, this bit implies a falling edge and not a high state. Correct the
definition to ease the comparison with the datasheet.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Maxime Ripard June 18, 2023, 2:39 p.m. UTC | #1
On Fri, 16 Jun 2023 18:32:53 +0200, Miquel Raynal wrote:
> The Sitronix datasheet explains BIT(1) of the RGBCTRL register as the
> DOTCLK/PCLK edge used to sample the data lines:
> 
>     “0” The data is input on the positive edge of DOTCLK
>     “1” The data is input on the negative edge of DOTCLK
> 
> [ ... ]

Acked-by: Maxime Ripard <mripard@kernel.org>

Thanks!
Maxime
diff mbox series

Patch

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
index 605b9f6d0f14..d7c5b3ad1baa 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
@@ -27,7 +27,7 @@ 
 #define ST7789V_RGBCTRL_RCM(n)			(((n) & 3) << 5)
 #define ST7789V_RGBCTRL_VSYNC_HIGH		BIT(3)
 #define ST7789V_RGBCTRL_HSYNC_HIGH		BIT(2)
-#define ST7789V_RGBCTRL_PCLK_HIGH		BIT(1)
+#define ST7789V_RGBCTRL_PCLK_FALLING		BIT(1)
 #define ST7789V_RGBCTRL_DE_LOW			BIT(0)
 #define ST7789V_RGBCTRL_VBP(n)			((n) & 0x7f)
 #define ST7789V_RGBCTRL_HBP(n)			((n) & 0x1f)
@@ -259,7 +259,7 @@  static int st7789v_prepare(struct drm_panel *panel)
 	if (ctx->info->mode->flags & DRM_MODE_FLAG_PHSYNC)
 		polarity |= ST7789V_RGBCTRL_HSYNC_HIGH;
 	if (ctx->info->bus_flags & DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE)
-		polarity |= ST7789V_RGBCTRL_PCLK_HIGH;
+		polarity |= ST7789V_RGBCTRL_PCLK_FALLING;
 	if (ctx->info->bus_flags & DRM_BUS_FLAG_DE_LOW)
 		polarity |= ST7789V_RGBCTRL_DE_LOW;