| Message ID | 20230627-sm6125-dpu-v2-10-03e430a2078c@somainline.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel | expand |
On 27/06/2023 23:14, Marijn Suijten wrote: > Document availability of the 14nm DSI PHY on SM6125. Note that this > compatible uses the SoC-suffix variant, intead of postfixing an > arbitrary number without the sm/sdm portion. The PHY is not powered by > a vcca regulator like on most SoCs, but by the MX power domain that is > provided via the power-domains property and a single corresponding > required-opps. > > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > --- > .../devicetree/bindings/display/msm/dsi-phy-14nm.yaml | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml > index a43e11d3b00d..183a26f8a6dc 100644 > --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml > +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml > @@ -19,6 +19,7 @@ properties: > - qcom,dsi-phy-14nm-2290 > - qcom,dsi-phy-14nm-660 > - qcom,dsi-phy-14nm-8953 > + - qcom,sm6125-dsi-phy-14nm > > reg: > items: > @@ -35,6 +36,16 @@ properties: > vcca-supply: > description: Phandle to vcca regulator device node. > > + power-domains: > + description: > + A phandle and PM domain specifier for an optional power domain. > + maxItems: 1 > + > + required-opps: > + description: > + A phandle to an OPP node describing an optional performance point. I'd rephrase this to be something more exact, like 'desribing power domain's performance point'. > + maxItems: 1 > + > required: > - compatible > - reg >
On 2023-06-29 13:54:13, Dmitry Baryshkov wrote: > On 27/06/2023 23:14, Marijn Suijten wrote: > > Document availability of the 14nm DSI PHY on SM6125. Note that this > > compatible uses the SoC-suffix variant, intead of postfixing an > > arbitrary number without the sm/sdm portion. The PHY is not powered by > > a vcca regulator like on most SoCs, but by the MX power domain that is > > provided via the power-domains property and a single corresponding > > required-opps. > > > > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > > --- > > .../devicetree/bindings/display/msm/dsi-phy-14nm.yaml | 11 +++++++++++ > > 1 file changed, 11 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml > > index a43e11d3b00d..183a26f8a6dc 100644 > > --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml > > +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml > > @@ -19,6 +19,7 @@ properties: > > - qcom,dsi-phy-14nm-2290 > > - qcom,dsi-phy-14nm-660 > > - qcom,dsi-phy-14nm-8953 > > + - qcom,sm6125-dsi-phy-14nm > > > > reg: > > items: > > @@ -35,6 +36,16 @@ properties: > > vcca-supply: > > description: Phandle to vcca regulator device node. > > > > + power-domains: > > + description: > > + A phandle and PM domain specifier for an optional power domain. > > + maxItems: 1 > > + > > + required-opps: > > + description: > > + A phandle to an OPP node describing an optional performance point. > > I'd rephrase this to be something more exact, like 'desribing power > domain's performance point'. Sure. I'll leave out the word "optional", that becomes obvious from maxItems:1 without minItems, together with referencing a PM which itself is already optional. - Marijn > > + maxItems: 1 > > + > > required: > > - compatible > > - reg > > > > -- > With best wishes > Dmitry >
On 19/07/2023 00:00, Marijn Suijten wrote: > On 2023-06-29 13:54:13, Dmitry Baryshkov wrote: >> On 27/06/2023 23:14, Marijn Suijten wrote: >>> Document availability of the 14nm DSI PHY on SM6125. Note that this >>> compatible uses the SoC-suffix variant, intead of postfixing an >>> arbitrary number without the sm/sdm portion. The PHY is not powered by >>> a vcca regulator like on most SoCs, but by the MX power domain that is >>> provided via the power-domains property and a single corresponding >>> required-opps. >>> >>> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >>> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> >>> --- >>> .../devicetree/bindings/display/msm/dsi-phy-14nm.yaml | 11 +++++++++++ >>> 1 file changed, 11 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml >>> index a43e11d3b00d..183a26f8a6dc 100644 >>> --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml >>> +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml >>> @@ -19,6 +19,7 @@ properties: >>> - qcom,dsi-phy-14nm-2290 >>> - qcom,dsi-phy-14nm-660 >>> - qcom,dsi-phy-14nm-8953 >>> + - qcom,sm6125-dsi-phy-14nm >>> >>> reg: >>> items: >>> @@ -35,6 +36,16 @@ properties: >>> vcca-supply: >>> description: Phandle to vcca regulator device node. >>> >>> + power-domains: >>> + description: >>> + A phandle and PM domain specifier for an optional power domain. >>> + maxItems: 1 >>> + >>> + required-opps: >>> + description: >>> + A phandle to an OPP node describing an optional performance point. >> >> I'd rephrase this to be something more exact, like 'desribing power >> domain's performance point'. > > Sure. I'll leave out the word "optional", that becomes obvious from > maxItems:1 without minItems, together with referencing a PM which itself > is already optional. no, default minItems is equal to maxItems. It is not listing this property under the required what makes it optional. > > - Marijn > >>> + maxItems: 1 >>> + >>> required: >>> - compatible >>> - reg >>> >> >> -- >> With best wishes >> Dmitry >>
On 2023-07-19 01:01:54, Dmitry Baryshkov wrote: > On 19/07/2023 00:00, Marijn Suijten wrote: > > On 2023-06-29 13:54:13, Dmitry Baryshkov wrote: > >> On 27/06/2023 23:14, Marijn Suijten wrote: > >>> Document availability of the 14nm DSI PHY on SM6125. Note that this > >>> compatible uses the SoC-suffix variant, intead of postfixing an > >>> arbitrary number without the sm/sdm portion. The PHY is not powered by > >>> a vcca regulator like on most SoCs, but by the MX power domain that is > >>> provided via the power-domains property and a single corresponding > >>> required-opps. > >>> > >>> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > >>> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > >>> --- > >>> .../devicetree/bindings/display/msm/dsi-phy-14nm.yaml | 11 +++++++++++ > >>> 1 file changed, 11 insertions(+) > >>> > >>> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml > >>> index a43e11d3b00d..183a26f8a6dc 100644 > >>> --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml > >>> +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml > >>> @@ -19,6 +19,7 @@ properties: > >>> - qcom,dsi-phy-14nm-2290 > >>> - qcom,dsi-phy-14nm-660 > >>> - qcom,dsi-phy-14nm-8953 > >>> + - qcom,sm6125-dsi-phy-14nm > >>> > >>> reg: > >>> items: > >>> @@ -35,6 +36,16 @@ properties: > >>> vcca-supply: > >>> description: Phandle to vcca regulator device node. > >>> > >>> + power-domains: > >>> + description: > >>> + A phandle and PM domain specifier for an optional power domain. > >>> + maxItems: 1 > >>> + > >>> + required-opps: > >>> + description: > >>> + A phandle to an OPP node describing an optional performance point. > >> > >> I'd rephrase this to be something more exact, like 'desribing power > >> domain's performance point'. > > > > Sure. I'll leave out the word "optional", that becomes obvious from > > maxItems:1 without minItems, together with referencing a PM which itself > > is already optional. > > no, default minItems is equal to maxItems. It is not listing this > property under the required what makes it optional. I thought it was both. Magic. - Marijn
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index a43e11d3b00d..183a26f8a6dc 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -19,6 +19,7 @@ properties: - qcom,dsi-phy-14nm-2290 - qcom,dsi-phy-14nm-660 - qcom,dsi-phy-14nm-8953 + - qcom,sm6125-dsi-phy-14nm reg: items: @@ -35,6 +36,16 @@ properties: vcca-supply: description: Phandle to vcca regulator device node. + power-domains: + description: + A phandle and PM domain specifier for an optional power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing an optional performance point. + maxItems: 1 + required: - compatible - reg