diff mbox series

[v3,11/15] drm/msm/dsi: Reuse QCM2290 14nm DSI PHY configuration for SM6125

Message ID 20230718-sm6125-dpu-v3-11-6c5a56e99820@somainline.org (mailing list archive)
State New, archived
Headers show
Series drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel | expand

Commit Message

Marijn Suijten July 18, 2023, 9:24 p.m. UTC 
SM6125 features only a single PHY (despite a secondary PHY PLL source
being available to the disp_cc_mdss_pclk0_clk_src clock), and downstream
sources for this "trinket" SoC do not define the typical "vcca"
regulator to be available nor used.  This, including the register offset
is identical to QCM2290, whose config struct can trivially be reused.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 323498237ef4..f59cf2a47b4c 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -561,6 +561,8 @@  static const struct of_device_id dsi_phy_dt_match[] = {
 	  .data = &dsi_phy_14nm_660_cfgs },
 	{ .compatible = "qcom,dsi-phy-14nm-8953",
 	  .data = &dsi_phy_14nm_8953_cfgs },
+	{ .compatible = "qcom,sm6125-dsi-phy-14nm",
+	  .data = &dsi_phy_14nm_2290_cfgs },
 #endif
 #ifdef CONFIG_DRM_MSM_DSI_10NM_PHY
 	{ .compatible = "qcom,dsi-phy-10nm",