diff mbox series

[v3,5/8] drm: atmel_hlcdc: Add support for XLCDC in atmel LCD driver

Message ID 20230817091250.225512-6-manikandan.m@microchip.com (mailing list archive)
State New, archived
Headers show
Series Add support for XLCDC to sam9x7 SoC family. | expand

Commit Message

Manikandan Muralidharan Aug. 17, 2023, 9:12 a.m. UTC
- XLCDC in SAM9X7 has different sets of registers and additional
configuration bits when compared to previous HLCDC IP. Read/write
operation on the controller registers is now separated using the
XLCDC status flag.
	- HEO scaling, window resampling, Alpha blending, YUV-to-RGB
conversion in XLCDC is derived and handled using additional
configuration bits and registers.
	- Writing one to the Enable fields of each layer in LCD_ATTRE
is required to reflect the values set in Configuration, FBA, Enable
registers of each layer

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Co-developed-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com>
Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com>
Co-developed-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
 .../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c    |  25 +-
 .../gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c   | 333 +++++++++++++++---
 2 files changed, 299 insertions(+), 59 deletions(-)

Comments

kernel test robot Aug. 17, 2023, 3:13 p.m. UTC | #1
Hi Manikandan,

kernel test robot noticed the following build warnings:

[auto build test WARNING on drm-misc/drm-misc-next]
[also build test WARNING on lee-mfd/for-mfd-next lee-leds/for-leds-next lee-mfd/for-mfd-fixes linus/master v6.5-rc6 next-20230817]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Manikandan-Muralidharan/mfd-atmel-hlcdc-Add-compatible-for-sam9x75-XLCD-controller/20230817-172003
base:   git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
patch link:    https://lore.kernel.org/r/20230817091250.225512-6-manikandan.m%40microchip.com
patch subject: [PATCH v3 5/8] drm: atmel_hlcdc: Add support for XLCDC in atmel LCD driver
config: arm-randconfig-r033-20230817 (https://download.01.org/0day-ci/archive/20230817/202308172209.DZ2HgtVa-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 12.3.0
reproduce: (https://download.01.org/0day-ci/archive/20230817/202308172209.DZ2HgtVa-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202308172209.DZ2HgtVa-lkp@intel.com/

All warnings (new ones prefixed by >>):

>> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:1013:6: warning: no previous prototype for 'hlcdc_irq_dbg' [-Wmissing-prototypes]
    1013 | void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
         |      ^~~~~~~~~~~~~
>> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:1029:6: warning: no previous prototype for 'xlcdc_irq_dbg' [-Wmissing-prototypes]
    1029 | void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
         |      ^~~~~~~~~~~~~


vim +/hlcdc_irq_dbg +1013 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c

  1012	
> 1013	void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
  1014			   const struct atmel_hlcdc_layer_desc *desc)
  1015	{
  1016		u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
  1017	
  1018		/*
  1019		 * There's not much we can do in case of overrun except informing
  1020		 * the user. However, we are in interrupt context here, hence the
  1021		 * use of dev_dbg().
  1022		 */
  1023		if (isr &
  1024		    (ATMEL_HLCDC_LAYER_OVR_IRQ(0) | ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
  1025		     ATMEL_HLCDC_LAYER_OVR_IRQ(2)))
  1026			pr_warn("%s: overrun on plane %s\n", __func__, desc->name);
  1027	}
  1028	
> 1029	void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
  1030			   const struct atmel_hlcdc_layer_desc *desc)
  1031	{
  1032		u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
  1033	
  1034		/*
  1035		 * There's not much we can do in case of overrun except informing
  1036		 * the user. However, we are in interrupt context here, hence the
  1037		 * use of dev_dbg().
  1038		 */
  1039		if (isr &
  1040		    (ATMEL_XLCDC_LAYER_OVR_IRQ(0) | ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
  1041		     ATMEL_XLCDC_LAYER_OVR_IRQ(2)))
  1042			pr_warn("%s: overrun on plane %s\n", __func__, desc->name);
  1043	}
  1044
kernel test robot Aug. 17, 2023, 3:24 p.m. UTC | #2
Hi Manikandan,

kernel test robot noticed the following build warnings:

[auto build test WARNING on drm-misc/drm-misc-next]
[also build test WARNING on lee-mfd/for-mfd-next lee-leds/for-leds-next lee-mfd/for-mfd-fixes linus/master v6.5-rc6 next-20230817]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Manikandan-Muralidharan/mfd-atmel-hlcdc-Add-compatible-for-sam9x75-XLCD-controller/20230817-172003
base:   git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
patch link:    https://lore.kernel.org/r/20230817091250.225512-6-manikandan.m%40microchip.com
patch subject: [PATCH v3 5/8] drm: atmel_hlcdc: Add support for XLCDC in atmel LCD driver
config: arm-randconfig-r046-20230817 (https://download.01.org/0day-ci/archive/20230817/202308172303.AgUIhGKY-lkp@intel.com/config)
compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project.git 4a5ac14ee968ff0ad5d2cc1ffa0299048db4c88a)
reproduce: (https://download.01.org/0day-ci/archive/20230817/202308172303.AgUIhGKY-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202308172303.AgUIhGKY-lkp@intel.com/

All warnings (new ones prefixed by >>):

>> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:1013:6: warning: no previous prototype for function 'hlcdc_irq_dbg' [-Wmissing-prototypes]
    1013 | void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
         |      ^
   drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:1013:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
    1013 | void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
         | ^
         | static 
>> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:1029:6: warning: no previous prototype for function 'xlcdc_irq_dbg' [-Wmissing-prototypes]
    1029 | void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
         |      ^
   drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:1029:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
    1029 | void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
         | ^
         | static 
   2 warnings generated.


vim +/hlcdc_irq_dbg +1013 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c

  1012	
> 1013	void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
  1014			   const struct atmel_hlcdc_layer_desc *desc)
  1015	{
  1016		u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
  1017	
  1018		/*
  1019		 * There's not much we can do in case of overrun except informing
  1020		 * the user. However, we are in interrupt context here, hence the
  1021		 * use of dev_dbg().
  1022		 */
  1023		if (isr &
  1024		    (ATMEL_HLCDC_LAYER_OVR_IRQ(0) | ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
  1025		     ATMEL_HLCDC_LAYER_OVR_IRQ(2)))
  1026			pr_warn("%s: overrun on plane %s\n", __func__, desc->name);
  1027	}
  1028	
> 1029	void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
  1030			   const struct atmel_hlcdc_layer_desc *desc)
  1031	{
  1032		u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
  1033	
  1034		/*
  1035		 * There's not much we can do in case of overrun except informing
  1036		 * the user. However, we are in interrupt context here, hence the
  1037		 * use of dev_dbg().
  1038		 */
  1039		if (isr &
  1040		    (ATMEL_XLCDC_LAYER_OVR_IRQ(0) | ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
  1041		     ATMEL_XLCDC_LAYER_OVR_IRQ(2)))
  1042			pr_warn("%s: overrun on plane %s\n", __func__, desc->name);
  1043	}
  1044
diff mbox series

Patch

diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index cc5cf4c2faf7..4b11a1de8af4 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -79,6 +79,7 @@  static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
 	unsigned int mask = ATMEL_HLCDC_CLKDIV_MASK | ATMEL_HLCDC_CLKPOL;
 	unsigned int cfg = 0;
 	int div, ret;
+	bool is_xlcdc = crtc->dc->desc->is_xlcdc;
 
 	/* get encoder from crtc */
 	drm_for_each_encoder(en_iter, ddev) {
@@ -164,10 +165,10 @@  static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
 	state = drm_crtc_state_to_atmel_hlcdc_crtc_state(c->state);
 	cfg = state->output_mode << 8;
 
-	if (adj->flags & DRM_MODE_FLAG_NVSYNC)
+	if (!is_xlcdc && (adj->flags & DRM_MODE_FLAG_NVSYNC))
 		cfg |= ATMEL_HLCDC_VSPOL;
 
-	if (adj->flags & DRM_MODE_FLAG_NHSYNC)
+	if (!is_xlcdc && (adj->flags & DRM_MODE_FLAG_NHSYNC))
 		cfg |= ATMEL_HLCDC_HSPOL;
 
 	regmap_update_bits(regmap, ATMEL_HLCDC_CFG(5),
@@ -202,6 +203,16 @@  static void atmel_hlcdc_crtc_atomic_disable(struct drm_crtc *c,
 
 	pm_runtime_get_sync(dev->dev);
 
+	if (crtc->dc->desc->is_xlcdc) {
+		regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_CM);
+		regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+					 !(status & ATMEL_XLCDC_CM), 10, 0);
+
+		regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_SD);
+		regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+					 status & ATMEL_XLCDC_SD, 10, 0);
+	}
+
 	regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_DISP);
 	while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
 	       (status & ATMEL_HLCDC_DISP))
@@ -256,6 +267,16 @@  static void atmel_hlcdc_crtc_atomic_enable(struct drm_crtc *c,
 	       !(status & ATMEL_HLCDC_DISP))
 		cpu_relax();
 
+	if (crtc->dc->desc->is_xlcdc) {
+		regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_CM);
+		regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+					 status & ATMEL_XLCDC_CM, 10, 0);
+
+		regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_SD);
+		regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+					 !(status & ATMEL_XLCDC_SD), 10, 0);
+	}
+
 	pm_runtime_put_sync(dev->dev);
 
 }
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
index daa508504f47..62c4bb65d8ac 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
@@ -330,11 +330,59 @@  static void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
 								     yfactor));
 }
 
+static void atmel_xlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
+					   struct atmel_hlcdc_plane_state *state)
+{
+	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+	u32 xfactor, yfactor;
+
+	if (!desc->layout.scaler_config)
+		return;
+
+	if (state->crtc_w == state->src_w && state->crtc_h == state->src_h) {
+		atmel_hlcdc_layer_write_cfg(&plane->layer,
+					    desc->layout.scaler_config, 0);
+		return;
+	}
+
+	/* xfactor = round[(2^20 * XMEMSIZE)/XSIZE)] */
+	xfactor = (u32)(((1 << 20) * state->src_w) / state->crtc_w);
+
+	/* yfactor = round[(2^20 * YMEMSIZE)/YSIZE)] */
+	yfactor = (u32)(((1 << 20) * state->src_h) / state->crtc_h);
+
+	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config,
+				    ATMEL_XLCDC_LAYER_VSCALER_LUMA_ENABLE |
+				    ATMEL_XLCDC_LAYER_VSCALER_CHROMA_ENABLE |
+				    ATMEL_XLCDC_LAYER_HSCALER_LUMA_ENABLE |
+				    ATMEL_XLCDC_LAYER_HSCALER_CHROMA_ENABLE);
+
+	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 1,
+				    yfactor);
+	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 3,
+				    xfactor);
+
+	/* As per YCbCr window resampling configuration */
+	if (state->base.fb->format->format == DRM_FORMAT_YUV420) {
+		atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2,
+					    yfactor / 2);
+		atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4,
+					    xfactor / 2);
+	} else {
+		/* As per ARGB window resampling configuration */
+		atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2,
+					    yfactor);
+		atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4,
+					    xfactor);
+	}
+}
+
 static void
 atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
 				      struct atmel_hlcdc_plane_state *state)
 {
 	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
 
 	if (desc->layout.size)
 		atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.size,
@@ -352,7 +400,10 @@  atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
 					ATMEL_HLCDC_LAYER_POS(state->crtc_x,
 							      state->crtc_y));
 
-	atmel_hlcdc_plane_setup_scaler(plane, state);
+	if (dc->desc->is_xlcdc)
+		atmel_xlcdc_plane_setup_scaler(plane, state);
+	else
+		atmel_hlcdc_plane_setup_scaler(plane, state);
 }
 
 static void
@@ -393,6 +444,40 @@  atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
 				    cfg);
 }
 
+static void
+atmel_xlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
+					  struct atmel_hlcdc_plane_state *state)
+{
+	unsigned int cfg;
+	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+	const struct drm_format_info *format = state->base.fb->format;
+
+	atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_XLCDC_LAYER_DMA_CFG,
+				    ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 | state->ahb_id);
+
+	cfg = ATMEL_XLCDC_LAYER_DMA | ATMEL_XLCDC_LAYER_REP;
+
+	if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) {
+		/*
+		 * Alpha Blending bits specific to SAM9X7 SoC
+		 */
+		cfg |= ATMEL_XLCDC_LAYER_SFACTC_A0_MULT_AS |
+		       ATMEL_XLCDC_LAYER_SFACTA_ONE |
+		       ATMEL_XLCDC_LAYER_DFACTC_M_A0_MULT_AS |
+		       ATMEL_XLCDC_LAYER_DFACTA_ONE;
+		if (format->has_alpha)
+			cfg |= ATMEL_XLCDC_LAYER_A0(0xff);
+		else
+			cfg |= ATMEL_XLCDC_LAYER_A0(state->base.alpha);
+	}
+
+	if (state->disc_h && state->disc_w)
+		cfg |= ATMEL_XLCDC_LAYER_DISCEN;
+
+	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.general_config,
+				    cfg);
+}
+
 static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane,
 					struct atmel_hlcdc_plane_state *state)
 {
@@ -437,36 +522,55 @@  static void atmel_hlcdc_plane_update_clut(struct atmel_hlcdc_plane *plane,
 	}
 }
 
+static void update_hlcdc_buffers(struct atmel_hlcdc_plane *plane,
+				 struct atmel_hlcdc_plane_state *state, u32 sr, int i)
+{
+	atmel_hlcdc_layer_write_reg(&plane->layer,
+				    ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
+				    state->dscrs[i]->self);
+
+	if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
+		atmel_hlcdc_layer_write_reg(&plane->layer,
+					    ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
+					    state->dscrs[i]->addr);
+		atmel_hlcdc_layer_write_reg(&plane->layer,
+					    ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
+					    state->dscrs[i]->ctrl);
+		atmel_hlcdc_layer_write_reg(&plane->layer,
+					    ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
+					    state->dscrs[i]->self);
+	}
+}
+
+static void update_xlcdc_buffers(struct atmel_hlcdc_plane *plane,
+				 struct atmel_hlcdc_plane_state *state, int i)
+{
+	atmel_hlcdc_layer_write_reg(&plane->layer,
+				    ATMEL_XLCDC_LAYER_PLANE_ADDR(i),
+				    state->dscrs[i]->addr);
+}
+
 static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane,
-					struct atmel_hlcdc_plane_state *state)
+					     struct atmel_hlcdc_plane_state *state)
 {
 	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
 	struct drm_framebuffer *fb = state->base.fb;
 	u32 sr;
 	int i;
 
-	sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
+	if (!dc->desc->is_xlcdc)
+		sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
 
 	for (i = 0; i < state->nplanes; i++) {
 		struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i);
 
 		state->dscrs[i]->addr = gem->dma_addr + state->offsets[i];
 
-		atmel_hlcdc_layer_write_reg(&plane->layer,
-					    ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
-					    state->dscrs[i]->self);
-
-		if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
-			atmel_hlcdc_layer_write_reg(&plane->layer,
-					ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
-					state->dscrs[i]->addr);
-			atmel_hlcdc_layer_write_reg(&plane->layer,
-					ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
-					state->dscrs[i]->ctrl);
-			atmel_hlcdc_layer_write_reg(&plane->layer,
-					ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
-					state->dscrs[i]->self);
-		}
+		if (dc->desc->is_xlcdc)
+			update_xlcdc_buffers(plane, state, i);
+		else
+			update_hlcdc_buffers(plane, state, sr, i);
 
 		if (desc->layout.xstride[i])
 			atmel_hlcdc_layer_write_cfg(&plane->layer,
@@ -712,11 +816,8 @@  static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p,
 	return 0;
 }
 
-static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
-					     struct drm_atomic_state *state)
+static void hlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
 {
-	struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
-
 	/* Disable interrupts */
 	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IDR,
 				    0xffffffff);
@@ -731,6 +832,72 @@  static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
 	atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
 }
 
+static void xlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
+{
+	/* Disable interrupts */
+	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IDR,
+				    0xffffffff);
+
+	/* Disable the layer */
+	atmel_hlcdc_layer_write_reg(&plane->layer,
+				    ATMEL_XLCDC_LAYER_ENR, 0);
+
+	/* Clear all pending interrupts */
+	atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
+}
+
+static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
+					     struct drm_atomic_state *state)
+{
+	struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
+	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
+
+	if (dc->desc->is_xlcdc)
+		xlcdc_atomic_disable(plane);
+	else
+		hlcdc_atomic_disable(plane);
+}
+
+static void hlcdc_atomic_update(struct atmel_hlcdc_plane *plane)
+{
+	u32 sr;
+
+	/* Enable the overrun interrupts. */
+	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
+				    ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
+				    ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
+				    ATMEL_HLCDC_LAYER_OVR_IRQ(2));
+
+	/* Apply the new config at the next SOF event. */
+	sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
+	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
+				    ATMEL_HLCDC_LAYER_UPDATE |
+				    (sr & ATMEL_HLCDC_LAYER_EN ?
+				    ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
+}
+
+static void xlcdc_atomic_update(struct atmel_hlcdc_plane *plane,
+				struct atmel_hlcdc_dc *dc)
+{
+	/* Enable the overrun interrupts. */
+	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IER,
+				    ATMEL_XLCDC_LAYER_OVR_IRQ(0) |
+				    ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
+				    ATMEL_XLCDC_LAYER_OVR_IRQ(2));
+
+	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_ENR,
+				    ATMEL_XLCDC_LAYER_EN);
+
+	/*
+	 * Updating XLCDC_xxxCFGx, XLCDC_xxxFBA and XLCDC_xxxEN,
+	 * (where xxx indicates each layer) requires writing one to the
+	 * Update Attribute field for each layer in LCDC_ATTRE register for SAM9X7.
+	 */
+	regmap_write(dc->hlcdc->regmap, ATMEL_XLCDC_ATTRE, ATMEL_XLCDC_BASE_UPDATE |
+		     ATMEL_XLCDC_OVR1_UPDATE | ATMEL_XLCDC_OVR3_UPDATE |
+		     ATMEL_XLCDC_HEO_UPDATE);
+}
+
 static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
 					    struct drm_atomic_state *state)
 {
@@ -739,7 +906,7 @@  static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
 	struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
 	struct atmel_hlcdc_plane_state *hstate =
 			drm_plane_state_to_atmel_hlcdc_plane_state(new_s);
-	u32 sr;
+	struct atmel_hlcdc_dc *dc = p->dev->dev_private;
 
 	if (!new_s->crtc || !new_s->fb)
 		return;
@@ -750,29 +917,67 @@  static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
 	}
 
 	atmel_hlcdc_plane_update_pos_and_size(plane, hstate);
-	atmel_hlcdc_plane_update_general_settings(plane, hstate);
+	if (dc->desc->is_xlcdc)
+		atmel_xlcdc_plane_update_general_settings(plane, hstate);
+	else
+		atmel_hlcdc_plane_update_general_settings(plane, hstate);
 	atmel_hlcdc_plane_update_format(plane, hstate);
 	atmel_hlcdc_plane_update_clut(plane, hstate);
 	atmel_hlcdc_plane_update_buffers(plane, hstate);
 	atmel_hlcdc_plane_update_disc_area(plane, hstate);
 
-	/* Enable the overrun interrupts. */
-	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
-				    ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
-				    ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
-				    ATMEL_HLCDC_LAYER_OVR_IRQ(2));
+	if (dc->desc->is_xlcdc)
+		xlcdc_atomic_update(plane, dc);
+	else
+		hlcdc_atomic_update(plane);
+}
 
-	/* Apply the new config at the next SOF event. */
-	sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
-	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
-			ATMEL_HLCDC_LAYER_UPDATE |
-			(sr & ATMEL_HLCDC_LAYER_EN ?
-			 ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
+u32 hlcdc_csc_coeffs[] = {
+	0x4c900091,
+	0x7a5f5090,
+	0x40040890
+};
+
+u32 xlcdc_csc_coeffs[] = {
+	0x00000488,
+	0x00000648,
+	0x1EA00480,
+	0x00001D28,
+	0x08100480,
+	0x00000000,
+	0x00000007
+};
+
+static void hlcdc_csc_init(struct atmel_hlcdc_plane *plane,
+			   const struct atmel_hlcdc_layer_desc *desc)
+{
+	/*
+	 * TODO: declare a "yuv-to-rgb-conv-factors" property to let
+	 * userspace modify these factors (using a BLOB property ?).
+	 */
+	for (int i = 0; i < ARRAY_SIZE(hlcdc_csc_coeffs); i++)
+		atmel_hlcdc_layer_write_cfg(&plane->layer,
+					    desc->layout.csc + i,
+					    hlcdc_csc_coeffs[i]);
+}
+
+static void xlcdc_csc_init(struct atmel_hlcdc_plane *plane,
+			   const struct atmel_hlcdc_layer_desc *desc)
+{
+	/*
+	 * yuv-to-rgb-conv-factors are now defined from LCDC_HEOCFG16 to
+	 * LCDC_HEOCFG21 registers in SAM9X7.
+	 */
+	for (int i = 0; i < ARRAY_SIZE(xlcdc_csc_coeffs); i++)
+		atmel_hlcdc_layer_write_cfg(&plane->layer,
+					    desc->layout.csc + i,
+					    xlcdc_csc_coeffs[i]);
 }
 
 static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
 {
 	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
 
 	if (desc->type == ATMEL_HLCDC_OVERLAY_LAYER ||
 	    desc->type == ATMEL_HLCDC_CURSOR_LAYER) {
@@ -796,31 +1001,19 @@  static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
 			return ret;
 	}
 
-	if (desc->layout.csc) {
-		/*
-		 * TODO: decare a "yuv-to-rgb-conv-factors" property to let
-		 * userspace modify these factors (using a BLOB property ?).
-		 */
-		atmel_hlcdc_layer_write_cfg(&plane->layer,
-					    desc->layout.csc,
-					    0x4c900091);
-		atmel_hlcdc_layer_write_cfg(&plane->layer,
-					    desc->layout.csc + 1,
-					    0x7a5f5090);
-		atmel_hlcdc_layer_write_cfg(&plane->layer,
-					    desc->layout.csc + 2,
-					    0x40040890);
-	}
+	if (dc->desc->is_xlcdc && desc->layout.csc)
+		xlcdc_csc_init(plane, desc);
+	else
+		if (desc->layout.csc)
+			hlcdc_csc_init(plane, desc);
 
 	return 0;
 }
 
-void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
+void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
+		   const struct atmel_hlcdc_layer_desc *desc)
 {
-	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
-	u32 isr;
-
-	isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
+	u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
 
 	/*
 	 * There's not much we can do in case of overrun except informing
@@ -830,8 +1023,34 @@  void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
 	if (isr &
 	    (ATMEL_HLCDC_LAYER_OVR_IRQ(0) | ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
 	     ATMEL_HLCDC_LAYER_OVR_IRQ(2)))
-		dev_dbg(plane->base.dev->dev, "overrun on plane %s\n",
-			desc->name);
+		pr_warn("%s: overrun on plane %s\n", __func__, desc->name);
+}
+
+void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
+		   const struct atmel_hlcdc_layer_desc *desc)
+{
+	u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
+
+	/*
+	 * There's not much we can do in case of overrun except informing
+	 * the user. However, we are in interrupt context here, hence the
+	 * use of dev_dbg().
+	 */
+	if (isr &
+	    (ATMEL_XLCDC_LAYER_OVR_IRQ(0) | ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
+	     ATMEL_XLCDC_LAYER_OVR_IRQ(2)))
+		pr_warn("%s: overrun on plane %s\n", __func__, desc->name);
+}
+
+void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
+{
+	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
+
+	if (dc->desc->is_xlcdc)
+		xlcdc_irq_dbg(plane, desc);
+	else
+		hlcdc_irq_dbg(plane, desc);
 }
 
 static const struct drm_plane_helper_funcs atmel_hlcdc_layer_plane_helper_funcs = {