@@ -5,6 +5,7 @@ config DRM_POWERVR
tristate "Imagination Technologies PowerVR (Series 6 and later) & IMG Graphics"
depends on ARM64
depends on DRM
+ depends on PM
select DRM_GEM_SHMEM_HELPER
select DRM_SCHED
select DRM_GPUVM
@@ -10,6 +10,7 @@ powervr-y := \
pvr_fw.o \
pvr_gem.o \
pvr_mmu.o \
+ pvr_power.o \
pvr_vm.o
obj-$(CONFIG_DRM_POWERVR) += powervr.o
@@ -5,6 +5,7 @@
#include "pvr_device_info.h"
#include "pvr_fw.h"
+#include "pvr_power.h"
#include "pvr_rogue_cr_defs.h"
#include "pvr_vm.h"
@@ -361,6 +362,8 @@ pvr_device_gpu_fini(struct pvr_device *pvr_dev)
int
pvr_device_init(struct pvr_device *pvr_dev)
{
+ struct drm_device *drm_dev = from_pvr_device(pvr_dev);
+ struct device *dev = drm_dev->dev;
int err;
/* Enable and initialize clocks required for the device to operate. */
@@ -368,13 +371,29 @@ pvr_device_init(struct pvr_device *pvr_dev)
if (err)
return err;
+ /* Explicitly power the GPU so we can access control registers before the FW is booted. */
+ err = pm_runtime_resume_and_get(dev);
+ if (err)
+ return err;
+
/* Map the control registers into memory. */
err = pvr_device_reg_init(pvr_dev);
if (err)
- return err;
+ goto err_pm_runtime_put;
/* Perform GPU-specific initialization steps. */
- return pvr_device_gpu_init(pvr_dev);
+ err = pvr_device_gpu_init(pvr_dev);
+ if (err)
+ goto err_pm_runtime_put;
+
+ pm_runtime_put(dev);
+
+ return 0;
+
+err_pm_runtime_put:
+ pm_runtime_put_sync_suspend(dev);
+
+ return err;
}
/**
@@ -141,6 +141,28 @@ struct pvr_device {
* before submitting the next job.
*/
atomic_t mmu_flush_cache_flags;
+
+ struct {
+ /** @work: Work item for watchdog callback. */
+ struct delayed_work work;
+
+ /** @old_kccb_cmds_executed: KCCB command execution count at last watchdog poll. */
+ u32 old_kccb_cmds_executed;
+
+ /** @kccb_stall_count: Number of watchdog polls KCCB has been stalled for. */
+ u32 kccb_stall_count;
+ } watchdog;
+
+ /**
+ * @lost: %true if the device has been lost.
+ *
+ * This variable is set if the device has become irretrievably unavailable, e.g. if the
+ * firmware processor has stopped responding and can not be revived via a hard reset.
+ */
+ bool lost;
+
+ /** @sched_wq: Workqueue for schedulers. */
+ struct workqueue_struct *sched_wq;
};
/**
@@ -5,6 +5,7 @@
#include "pvr_drv.h"
#include "pvr_gem.h"
#include "pvr_mmu.h"
+#include "pvr_power.h"
#include "pvr_rogue_defs.h"
#include "pvr_rogue_fwif_client.h"
#include "pvr_rogue_fwif_shared.h"
@@ -1265,9 +1266,16 @@ pvr_probe(struct platform_device *plat_dev)
platform_set_drvdata(plat_dev, drm_dev);
+ devm_pm_runtime_enable(&plat_dev->dev);
+ pm_runtime_mark_last_busy(&plat_dev->dev);
+
+ pm_runtime_set_autosuspend_delay(&plat_dev->dev, 50);
+ pm_runtime_use_autosuspend(&plat_dev->dev);
+ pvr_watchdog_init(pvr_dev);
+
err = pvr_device_init(pvr_dev);
if (err)
- return err;
+ goto err_watchdog_fini;
err = drm_dev_register(drm_dev, 0);
if (err)
@@ -1278,6 +1286,9 @@ pvr_probe(struct platform_device *plat_dev)
err_device_fini:
pvr_device_fini(pvr_dev);
+err_watchdog_fini:
+ pvr_watchdog_fini(pvr_dev);
+
return err;
}
@@ -1287,8 +1298,10 @@ pvr_remove(struct platform_device *plat_dev)
struct drm_device *drm_dev = platform_get_drvdata(plat_dev);
struct pvr_device *pvr_dev = to_pvr_device(drm_dev);
+ pm_runtime_suspend(drm_dev->dev);
pvr_device_fini(pvr_dev);
drm_dev_unplug(drm_dev);
+ pvr_watchdog_fini(pvr_dev);
return 0;
}
@@ -1299,11 +1312,16 @@ static const struct of_device_id dt_match[] = {
};
MODULE_DEVICE_TABLE(of, dt_match);
+static const struct dev_pm_ops pvr_pm_ops = {
+ RUNTIME_PM_OPS(pvr_power_device_suspend, pvr_power_device_resume, pvr_power_device_idle)
+};
+
static struct platform_driver pvr_driver = {
.probe = pvr_probe,
.remove = pvr_remove,
.driver = {
.name = PVR_DRIVER_NAME,
+ .pm = &pvr_pm_ops,
.of_match_table = dt_match,
},
};
new file mode 100644
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/* Copyright (c) 2023 Imagination Technologies Ltd. */
+
+#include "pvr_device.h"
+#include "pvr_fw.h"
+#include "pvr_power.h"
+#include "pvr_rogue_fwif.h"
+
+#include <drm/drm_drv.h>
+#include <drm/drm_managed.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#define POWER_SYNC_TIMEOUT_US (1000000) /* 1s */
+
+#define WATCHDOG_TIME_MS (500)
+
+static int
+pvr_power_send_command(struct pvr_device *pvr_dev, struct rogue_fwif_kccb_cmd *pow_cmd)
+{
+ /* TODO: implement */
+ return -ENODEV;
+}
+
+static int
+pvr_power_request_idle(struct pvr_device *pvr_dev)
+{
+ struct rogue_fwif_kccb_cmd pow_cmd;
+
+ /* Send FORCED_IDLE request to FW. */
+ pow_cmd.cmd_type = ROGUE_FWIF_KCCB_CMD_POW;
+ pow_cmd.cmd_data.pow_data.pow_type = ROGUE_FWIF_POW_FORCED_IDLE_REQ;
+ pow_cmd.cmd_data.pow_data.power_req_data.pow_request_type = ROGUE_FWIF_POWER_FORCE_IDLE;
+
+ return pvr_power_send_command(pvr_dev, &pow_cmd);
+}
+
+static int
+pvr_power_request_pwr_off(struct pvr_device *pvr_dev)
+{
+ struct rogue_fwif_kccb_cmd pow_cmd;
+
+ /* Send POW_OFF request to firmware. */
+ pow_cmd.cmd_type = ROGUE_FWIF_KCCB_CMD_POW;
+ pow_cmd.cmd_data.pow_data.pow_type = ROGUE_FWIF_POW_OFF_REQ;
+ pow_cmd.cmd_data.pow_data.power_req_data.forced = true;
+
+ return pvr_power_send_command(pvr_dev, &pow_cmd);
+}
+
+static int
+pvr_power_fw_disable(struct pvr_device *pvr_dev, bool hard_reset)
+{
+ if (!hard_reset) {
+ int err;
+
+ cancel_delayed_work_sync(&pvr_dev->watchdog.work);
+
+ err = pvr_power_request_idle(pvr_dev);
+ if (err)
+ return err;
+
+ err = pvr_power_request_pwr_off(pvr_dev);
+ if (err)
+ return err;
+ }
+
+ /* TODO: stop firmware */
+ return -ENODEV;
+}
+
+static int
+pvr_power_fw_enable(struct pvr_device *pvr_dev)
+{
+ int err;
+
+ /* TODO: start firmware */
+ err = -ENODEV;
+ if (err)
+ return err;
+
+ queue_delayed_work(pvr_dev->sched_wq, &pvr_dev->watchdog.work,
+ msecs_to_jiffies(WATCHDOG_TIME_MS));
+
+ return 0;
+}
+
+bool
+pvr_power_is_idle(struct pvr_device *pvr_dev)
+{
+ /* TODO: implement */
+ return true;
+}
+
+static bool
+pvr_watchdog_kccb_stalled(struct pvr_device *pvr_dev)
+{
+ /* TODO: implement */
+ return false;
+}
+
+static void
+pvr_watchdog_worker(struct work_struct *work)
+{
+ struct pvr_device *pvr_dev = container_of(work, struct pvr_device,
+ watchdog.work.work);
+ bool stalled;
+
+ if (pvr_dev->lost)
+ return;
+
+ if (pm_runtime_get_if_in_use(from_pvr_device(pvr_dev)->dev) <= 0)
+ goto out_requeue;
+
+ stalled = pvr_watchdog_kccb_stalled(pvr_dev);
+
+ if (stalled) {
+ drm_err(from_pvr_device(pvr_dev), "FW stalled, trying hard reset");
+
+ pvr_power_reset(pvr_dev, true);
+ /* Device may be lost at this point. */
+ }
+
+ pm_runtime_put(from_pvr_device(pvr_dev)->dev);
+
+out_requeue:
+ if (!pvr_dev->lost) {
+ queue_delayed_work(pvr_dev->sched_wq, &pvr_dev->watchdog.work,
+ msecs_to_jiffies(WATCHDOG_TIME_MS));
+ }
+}
+
+/**
+ * pvr_watchdog_init() - Initialise watchdog for device
+ * @pvr_dev: Target PowerVR device.
+ *
+ * Returns:
+ * * 0 on success, or
+ * * -%ENOMEM on out of memory.
+ */
+int
+pvr_watchdog_init(struct pvr_device *pvr_dev)
+{
+ INIT_DELAYED_WORK(&pvr_dev->watchdog.work, pvr_watchdog_worker);
+
+ return 0;
+}
+
+int
+pvr_power_device_suspend(struct device *dev)
+{
+ struct platform_device *plat_dev = to_platform_device(dev);
+ struct drm_device *drm_dev = platform_get_drvdata(plat_dev);
+ struct pvr_device *pvr_dev = to_pvr_device(drm_dev);
+ int idx;
+
+ if (!drm_dev_enter(drm_dev, &idx))
+ return -EIO;
+
+ clk_disable_unprepare(pvr_dev->mem_clk);
+ clk_disable_unprepare(pvr_dev->sys_clk);
+ clk_disable_unprepare(pvr_dev->core_clk);
+
+ drm_dev_exit(idx);
+
+ return 0;
+}
+
+int
+pvr_power_device_resume(struct device *dev)
+{
+ struct platform_device *plat_dev = to_platform_device(dev);
+ struct drm_device *drm_dev = platform_get_drvdata(plat_dev);
+ struct pvr_device *pvr_dev = to_pvr_device(drm_dev);
+ int idx;
+ int err;
+
+ if (!drm_dev_enter(drm_dev, &idx))
+ return -EIO;
+
+ err = clk_prepare_enable(pvr_dev->core_clk);
+ if (err)
+ goto err_drm_dev_exit;
+
+ err = clk_prepare_enable(pvr_dev->sys_clk);
+ if (err)
+ goto err_core_clk_disable;
+
+ err = clk_prepare_enable(pvr_dev->mem_clk);
+ if (err)
+ goto err_sys_clk_disable;
+
+ drm_dev_exit(idx);
+
+ return 0;
+
+err_sys_clk_disable:
+ clk_disable_unprepare(pvr_dev->sys_clk);
+
+err_core_clk_disable:
+ clk_disable_unprepare(pvr_dev->core_clk);
+
+err_drm_dev_exit:
+ drm_dev_exit(idx);
+
+ return err;
+}
+
+int
+pvr_power_device_idle(struct device *dev)
+{
+ struct platform_device *plat_dev = to_platform_device(dev);
+ struct drm_device *drm_dev = platform_get_drvdata(plat_dev);
+ struct pvr_device *pvr_dev = to_pvr_device(drm_dev);
+
+ return pvr_power_is_idle(pvr_dev) ? 0 : -EBUSY;
+}
+
+/**
+ * pvr_power_reset() - Reset the GPU
+ * @pvr_dev: Device pointer
+ * @hard_reset: %true for hard reset, %false for soft reset
+ *
+ * If @hard_reset is %false and the FW processor fails to respond during the reset process, this
+ * function will attempt a hard reset.
+ *
+ * If a hard reset fails then the GPU device is reported as lost.
+ *
+ * Returns:
+ * * 0 on success, or
+ * * Any error code returned by pvr_power_get, pvr_power_fw_disable or pvr_power_fw_enable().
+ */
+int
+pvr_power_reset(struct pvr_device *pvr_dev, bool hard_reset)
+{
+ /* TODO: Implement hard reset. */
+ int err;
+
+ /*
+ * Take a power reference during the reset. This should prevent any interference with the
+ * power state during reset.
+ */
+ WARN_ON(pvr_power_get(pvr_dev));
+
+ err = pvr_power_fw_disable(pvr_dev, false);
+ if (err)
+ goto err_power_put;
+
+ err = pvr_power_fw_enable(pvr_dev);
+
+err_power_put:
+ pvr_power_put(pvr_dev);
+
+ return err;
+}
+
+/**
+ * pvr_watchdog_fini() - Shutdown watchdog for device
+ * @pvr_dev: Target PowerVR device.
+ */
+void
+pvr_watchdog_fini(struct pvr_device *pvr_dev)
+{
+ cancel_delayed_work_sync(&pvr_dev->watchdog.work);
+}
new file mode 100644
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/* Copyright (c) 2023 Imagination Technologies Ltd. */
+
+#ifndef PVR_POWER_H
+#define PVR_POWER_H
+
+#include "pvr_device.h"
+
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+
+int pvr_watchdog_init(struct pvr_device *pvr_dev);
+void pvr_watchdog_fini(struct pvr_device *pvr_dev);
+
+bool pvr_power_is_idle(struct pvr_device *pvr_dev);
+
+int pvr_power_device_suspend(struct device *dev);
+int pvr_power_device_resume(struct device *dev);
+int pvr_power_device_idle(struct device *dev);
+
+int pvr_power_reset(struct pvr_device *pvr_dev, bool hard_reset);
+
+static __always_inline int
+pvr_power_get(struct pvr_device *pvr_dev)
+{
+ struct drm_device *drm_dev = from_pvr_device(pvr_dev);
+
+ return pm_runtime_resume_and_get(drm_dev->dev);
+}
+
+static __always_inline int
+pvr_power_put(struct pvr_device *pvr_dev)
+{
+ struct drm_device *drm_dev = from_pvr_device(pvr_dev);
+
+ return pm_runtime_put(drm_dev->dev);
+}
+
+#endif /* PVR_POWER_H */
Add power management to the driver, using runtime pm. The power off sequence depends on firmware commands which are not implemented in this patch. Changes since v5: - Use RUNTIME_PM_OPS() to declare PM callbacks - Add Kconfig dependency on CONFIG_PM Changes since v4: - Suspend runtime PM before unplugging device on rmmod Changes since v3: - Don't power device when calling pvr_device_gpu_fini() - Documentation for pvr_dev->lost has been improved - pvr_power_init() renamed to pvr_watchdog_init() - Use drm_dev_{enter,exit} Changes since v2: - Use runtime PM - Implement watchdog Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> --- drivers/gpu/drm/imagination/Kconfig | 1 + drivers/gpu/drm/imagination/Makefile | 1 + drivers/gpu/drm/imagination/pvr_device.c | 23 +- drivers/gpu/drm/imagination/pvr_device.h | 22 ++ drivers/gpu/drm/imagination/pvr_drv.c | 20 +- drivers/gpu/drm/imagination/pvr_power.c | 271 +++++++++++++++++++++++ drivers/gpu/drm/imagination/pvr_power.h | 39 ++++ 7 files changed, 374 insertions(+), 3 deletions(-) create mode 100644 drivers/gpu/drm/imagination/pvr_power.c create mode 100644 drivers/gpu/drm/imagination/pvr_power.h