diff mbox series

[14/17] arm64: dts: exynos7: add specific compatibles to several blocks

Message ID 20231108104343.24192-15-krzysztof.kozlowski@linaro.org (mailing list archive)
State New, archived
Headers show
Series dt-bindings: samsung: add specific compatibles for existing SoC | expand

Commit Message

Krzysztof Kozlowski Nov. 8, 2023, 10:43 a.m. UTC 
Exynos7 reuses several devices from older designs, thus historically
we kept the old (block's) compatible only.  This works fine and there is
no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.

Add compatibles specific to Exynos7 in front of all old-SoC-like
compatibles.  This will also help reviews of new code using existing
DTS as template.  No functional impact on Linux drivers behavior.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/exynos/exynos7.dtsi | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

Comments

Alim Akhtar Nov. 11, 2023, 1:42 a.m. UTC | #1 
> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Exynos7 reuses several devices from older designs, thus historically we kept
> the old (block's) compatible only.  This works fine and there is no bug here,
> however guidelines expressed in
> Documentation/devicetree/bindings/writing-bindings.rst state that:
> 1. Compatibles should be specific.
> 2. We should add new compatibles in case of bugs or features.
> 
> Add compatibles specific to Exynos7 in front of all old-SoC-like compatibles.
> This will also help reviews of new code using existing DTS as template.  No
> functional impact on Linux drivers behavior.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>

>  arch/arm64/boot/dts/exynos/exynos7.dtsi | 18 ++++++++++--------
>  1 file changed, 10 insertions(+), 8 deletions(-)
> 
(...)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 6ed80ddf3369..9cb6bd61262e 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -128,7 +128,8 @@  soc: soc@0 {
 		ranges = <0 0 0 0x18000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
+			compatible = "samsung,exynos7-chipid",
+				     "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
@@ -279,7 +280,7 @@  clock_fsys1: clock-controller@156e0000 {
 		};
 
 		serial_0: serial@13630000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x13630000 0x100>;
 			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric0 PCLK_UART0>,
@@ -289,7 +290,7 @@  serial_0: serial@13630000 {
 		};
 
 		serial_1: serial@14c20000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c20000 0x100>;
 			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART1>,
@@ -299,7 +300,7 @@  serial_1: serial@14c20000 {
 		};
 
 		serial_2: serial@14c30000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c30000 0x100>;
 			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART2>,
@@ -309,7 +310,7 @@  serial_2: serial@14c30000 {
 		};
 
 		serial_3: serial@14c40000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c40000 0x100>;
 			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART3>,
@@ -539,7 +540,7 @@  pmu_system_controller: system-controller@105c0000 {
 		};
 
 		rtc: rtc@10590000 {
-			compatible = "samsung,s3c6410-rtc";
+			compatible = "samsung,exynos7-rtc", "samsung,s3c6410-rtc";
 			reg = <0x10590000 0x100>;
 			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +560,8 @@  watchdog: watchdog@101d0000 {
 		};
 
 		gpu: gpu@14ac0000 {
-			compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+			compatible = "samsung,exynos7-mali",
+				     "samsung,exynos5433-mali", "arm,mali-t760";
 			reg = <0x14ac0000 0x5000>;
 			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
@@ -619,7 +621,7 @@  adc: adc@13620000 {
 		};
 
 		pwm: pwm@136c0000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "samsung,exynos7-pwm", "samsung,exynos4210-pwm";
 			reg = <0x136c0000 0x100>;
 			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,