diff mbox series

[v2,5/6] drm/msm/dsi: support DSC configurations with slice_per_pkt > 1

Message ID 20231114225857.19702-6-jonathan@marek.ca (mailing list archive)
State New, archived
Headers show
Series drm/msm: DSI DSC video mode fixes | expand

Commit Message

Jonathan Marek Nov. 14, 2023, 10:58 p.m. UTC 
Add a dsc_slice_per_pkt field to mipi_dsi_device struct and the necessary
changes to msm driver to support this field.

Note that the removed "pkt_per_line = slice_per_intf * slice_per_pkt"
comment is incorrect.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 25 ++++++++++---------------
 include/drm/drm_mipi_dsi.h         |  1 +
 2 files changed, 11 insertions(+), 15 deletions(-)

Comments

Dmitry Baryshkov Nov. 15, 2023, 7:49 a.m. UTC | #1 
On Wed, 15 Nov 2023 at 01:00, Jonathan Marek <jonathan@marek.ca> wrote:
>
> Add a dsc_slice_per_pkt field to mipi_dsi_device struct and the necessary
> changes to msm driver to support this field.
>
> Note that the removed "pkt_per_line = slice_per_intf * slice_per_pkt"
> comment is incorrect.
>
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 25 ++++++++++---------------
>  include/drm/drm_mipi_dsi.h         |  1 +
>  2 files changed, 11 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 842765063b1b..892a463a7e03 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -161,6 +161,7 @@ struct msm_dsi_host {
>
>         struct drm_display_mode *mode;
>         struct drm_dsc_config *dsc;
> +       unsigned int dsc_slice_per_pkt;
>
>         /* connected device info */
>         unsigned int channel;
> @@ -857,17 +858,10 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
>         slice_per_intf = msm_dsc_get_slices_per_intf(dsc, hdisplay);
>
>         total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf;
> -       bytes_per_pkt = dsc->slice_chunk_size; /* * slice_per_pkt; */
> +       bytes_per_pkt = dsc->slice_chunk_size * msm_host->dsc_slice_per_pkt;
>
>         eol_byte_num = total_bytes_per_intf % 3;
> -
> -       /*
> -        * Typically, pkt_per_line = slice_per_intf * slice_per_pkt.
> -        *
> -        * Since the current driver only supports slice_per_pkt = 1,
> -        * pkt_per_line will be equal to slice per intf for now.
> -        */
> -       pkt_per_line = slice_per_intf;
> +       pkt_per_line = slice_per_intf / msm_host->dsc_slice_per_pkt;
>
>         if (is_cmd_mode) /* packet data type */
>                 reg = DSI_COMMAND_COMPRESSION_MODE_CTRL_STREAM0_DATATYPE(MIPI_DSI_DCS_LONG_WRITE);
> @@ -1004,12 +998,8 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>                 else
>                         /*
>                          * When DSC is enabled, WC = slice_chunk_size * slice_per_pkt + 1.
> -                        * Currently, the driver only supports default value of slice_per_pkt = 1
> -                        *
> -                        * TODO: Expand mipi_dsi_device struct to hold slice_per_pkt info
> -                        *       and adjust DSC math to account for slice_per_pkt.
>                          */
> -                       wc = msm_host->dsc->slice_chunk_size + 1;
> +                       wc = msm_host->dsc->slice_chunk_size * msm_host->dsc_slice_per_pkt + 1;
>
>                 dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
>                         DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
> @@ -1636,8 +1626,13 @@ static int dsi_host_attach(struct mipi_dsi_host *host,
>         msm_host->lanes = dsi->lanes;
>         msm_host->format = dsi->format;
>         msm_host->mode_flags = dsi->mode_flags;
> -       if (dsi->dsc)
> +       if (dsi->dsc) {
>                 msm_host->dsc = dsi->dsc;
> +               msm_host->dsc_slice_per_pkt = dsi->dsc_slice_per_pkt;
> +               /* for backwards compatibility, assume 1 if not set */
> +               if (!msm_host->dsc_slice_per_pkt)
> +                       msm_host->dsc_slice_per_pkt = 1;
> +       }
>
>         /* Some gpios defined in panel DT need to be controlled by host */
>         ret = dsi_host_init_panel_gpios(msm_host, &dsi->dev);
> diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
> index c9df0407980c..3e32fa52d94b 100644
> --- a/include/drm/drm_mipi_dsi.h
> +++ b/include/drm/drm_mipi_dsi.h
> @@ -193,6 +193,7 @@ struct mipi_dsi_device {
>         unsigned long hs_rate;
>         unsigned long lp_rate;
>         struct drm_dsc_config *dsc;
> +       unsigned int dsc_slice_per_pkt;

Missing documentation. Also maybe this chunk should go into a separate
patch so that it can gain more attention from DRM maintainers?

>  };
>
>  #define MIPI_DSI_MODULE_PREFIX "mipi-dsi:"
> --
> 2.26.1
>
Jessica Zhang Dec. 7, 2023, 8:28 p.m. UTC | #2 
On 11/14/2023 2:58 PM, Jonathan Marek wrote:
> Add a dsc_slice_per_pkt field to mipi_dsi_device struct and the necessary
> changes to msm driver to support this field.
> 
> Note that the removed "pkt_per_line = slice_per_intf * slice_per_pkt"
> comment is incorrect.

Hi John,

Thanks for catching the typo.

> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
>   drivers/gpu/drm/msm/dsi/dsi_host.c | 25 ++++++++++---------------
>   include/drm/drm_mipi_dsi.h         |  1 +
>   2 files changed, 11 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 842765063b1b..892a463a7e03 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -161,6 +161,7 @@ struct msm_dsi_host {
>   
>   	struct drm_display_mode *mode;
>   	struct drm_dsc_config *dsc;
> +	unsigned int dsc_slice_per_pkt;
>   
>   	/* connected device info */
>   	unsigned int channel;
> @@ -857,17 +858,10 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
>   	slice_per_intf = msm_dsc_get_slices_per_intf(dsc, hdisplay);
>   
>   	total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf;
> -	bytes_per_pkt = dsc->slice_chunk_size; /* * slice_per_pkt; */
> +	bytes_per_pkt = dsc->slice_chunk_size * msm_host->dsc_slice_per_pkt;
>   
>   	eol_byte_num = total_bytes_per_intf % 3;
> -
> -	/*
> -	 * Typically, pkt_per_line = slice_per_intf * slice_per_pkt.
> -	 *
> -	 * Since the current driver only supports slice_per_pkt = 1,
> -	 * pkt_per_line will be equal to slice per intf for now.
> -	 */
> -	pkt_per_line = slice_per_intf;
> +	pkt_per_line = slice_per_intf / msm_host->dsc_slice_per_pkt;
>   
>   	if (is_cmd_mode) /* packet data type */
>   		reg = DSI_COMMAND_COMPRESSION_MODE_CTRL_STREAM0_DATATYPE(MIPI_DSI_DCS_LONG_WRITE);
> @@ -1004,12 +998,8 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>   		else
>   			/*
>   			 * When DSC is enabled, WC = slice_chunk_size * slice_per_pkt + 1.
> -			 * Currently, the driver only supports default value of slice_per_pkt = 1
> -			 *
> -			 * TODO: Expand mipi_dsi_device struct to hold slice_per_pkt info
> -			 *       and adjust DSC math to account for slice_per_pkt.
>   			 */
> -			wc = msm_host->dsc->slice_chunk_size + 1;
> +			wc = msm_host->dsc->slice_chunk_size * msm_host->dsc_slice_per_pkt + 1;

Maybe we can reuse bytes_per_pkt here.

>   
>   		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
>   			DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
> @@ -1636,8 +1626,13 @@ static int dsi_host_attach(struct mipi_dsi_host *host,
>   	msm_host->lanes = dsi->lanes;
>   	msm_host->format = dsi->format;
>   	msm_host->mode_flags = dsi->mode_flags;
> -	if (dsi->dsc)
> +	if (dsi->dsc) {
>   		msm_host->dsc = dsi->dsc;
> +		msm_host->dsc_slice_per_pkt = dsi->dsc_slice_per_pkt;
> +		/* for backwards compatibility, assume 1 if not set */
> +		if (!msm_host->dsc_slice_per_pkt)
> +			msm_host->dsc_slice_per_pkt = 1;
> +	}
>   
>   	/* Some gpios defined in panel DT need to be controlled by host */
>   	ret = dsi_host_init_panel_gpios(msm_host, &dsi->dev);
> diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
> index c9df0407980c..3e32fa52d94b 100644
> --- a/include/drm/drm_mipi_dsi.h
> +++ b/include/drm/drm_mipi_dsi.h
> @@ -193,6 +193,7 @@ struct mipi_dsi_device {
>   	unsigned long hs_rate;
>   	unsigned long lp_rate;
>   	struct drm_dsc_config *dsc;

Any reason for not putting this in drm_dsc_config?

Thanks,

Jessica Zhang

> +	unsigned int dsc_slice_per_pkt;
>   };
>   
>   #define MIPI_DSI_MODULE_PREFIX "mipi-dsi:"
> -- 
> 2.26.1
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 842765063b1b..892a463a7e03 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -161,6 +161,7 @@  struct msm_dsi_host {
 
 	struct drm_display_mode *mode;
 	struct drm_dsc_config *dsc;
+	unsigned int dsc_slice_per_pkt;
 
 	/* connected device info */
 	unsigned int channel;
@@ -857,17 +858,10 @@  static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
 	slice_per_intf = msm_dsc_get_slices_per_intf(dsc, hdisplay);
 
 	total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf;
-	bytes_per_pkt = dsc->slice_chunk_size; /* * slice_per_pkt; */
+	bytes_per_pkt = dsc->slice_chunk_size * msm_host->dsc_slice_per_pkt;
 
 	eol_byte_num = total_bytes_per_intf % 3;
-
-	/*
-	 * Typically, pkt_per_line = slice_per_intf * slice_per_pkt.
-	 *
-	 * Since the current driver only supports slice_per_pkt = 1,
-	 * pkt_per_line will be equal to slice per intf for now.
-	 */
-	pkt_per_line = slice_per_intf;
+	pkt_per_line = slice_per_intf / msm_host->dsc_slice_per_pkt;
 
 	if (is_cmd_mode) /* packet data type */
 		reg = DSI_COMMAND_COMPRESSION_MODE_CTRL_STREAM0_DATATYPE(MIPI_DSI_DCS_LONG_WRITE);
@@ -1004,12 +998,8 @@  static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
 		else
 			/*
 			 * When DSC is enabled, WC = slice_chunk_size * slice_per_pkt + 1.
-			 * Currently, the driver only supports default value of slice_per_pkt = 1
-			 *
-			 * TODO: Expand mipi_dsi_device struct to hold slice_per_pkt info
-			 *       and adjust DSC math to account for slice_per_pkt.
 			 */
-			wc = msm_host->dsc->slice_chunk_size + 1;
+			wc = msm_host->dsc->slice_chunk_size * msm_host->dsc_slice_per_pkt + 1;
 
 		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
 			DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
@@ -1636,8 +1626,13 @@  static int dsi_host_attach(struct mipi_dsi_host *host,
 	msm_host->lanes = dsi->lanes;
 	msm_host->format = dsi->format;
 	msm_host->mode_flags = dsi->mode_flags;
-	if (dsi->dsc)
+	if (dsi->dsc) {
 		msm_host->dsc = dsi->dsc;
+		msm_host->dsc_slice_per_pkt = dsi->dsc_slice_per_pkt;
+		/* for backwards compatibility, assume 1 if not set */
+		if (!msm_host->dsc_slice_per_pkt)
+			msm_host->dsc_slice_per_pkt = 1;
+	}
 
 	/* Some gpios defined in panel DT need to be controlled by host */
 	ret = dsi_host_init_panel_gpios(msm_host, &dsi->dev);
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index c9df0407980c..3e32fa52d94b 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -193,6 +193,7 @@  struct mipi_dsi_device {
 	unsigned long hs_rate;
 	unsigned long lp_rate;
 	struct drm_dsc_config *dsc;
+	unsigned int dsc_slice_per_pkt;
 };
 
 #define MIPI_DSI_MODULE_PREFIX "mipi-dsi:"