@@ -1413,7 +1413,7 @@ static int ti_sn_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
int ret;
if (!pdata->pwm_enabled) {
- ret = pm_runtime_resume_and_get(pdata->dev);
+ ret = pm_runtime_resume_and_get(chip->dev);
if (ret < 0)
return ret;
}
@@ -1429,7 +1429,7 @@ static int ti_sn_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
SN_GPIO_MUX_MASK << (2 * SN_PWM_GPIO_IDX),
SN_GPIO_MUX_SPECIAL << (2 * SN_PWM_GPIO_IDX));
if (ret) {
- dev_err(pdata->dev, "failed to mux in PWM function\n");
+ dev_err(chip->dev, "failed to mux in PWM function\n");
goto out;
}
}
@@ -1505,7 +1505,7 @@ static int ti_sn_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
ret = regmap_write(pdata->regmap, SN_PWM_PRE_DIV_REG, pre_div);
if (ret) {
- dev_err(pdata->dev, "failed to update PWM_PRE_DIV\n");
+ dev_err(chip->dev, "failed to update PWM_PRE_DIV\n");
goto out;
}
@@ -1517,7 +1517,7 @@ static int ti_sn_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
FIELD_PREP(SN_PWM_INV_MASK, state->polarity == PWM_POLARITY_INVERSED);
ret = regmap_write(pdata->regmap, SN_PWM_EN_INV_REG, pwm_en_inv);
if (ret) {
- dev_err(pdata->dev, "failed to update PWM_EN/PWM_INV\n");
+ dev_err(chip->dev, "failed to update PWM_EN/PWM_INV\n");
goto out;
}
@@ -1525,7 +1525,7 @@ static int ti_sn_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
out:
if (!pdata->pwm_enabled)
- pm_runtime_put_sync(pdata->dev);
+ pm_runtime_put_sync(chip->dev);
return ret;
}
@@ -1585,12 +1585,14 @@ static int ti_sn_pwm_probe(struct auxiliary_device *adev,
{
struct ti_sn65dsi86 *pdata = dev_get_drvdata(adev->dev.parent);
- pdata->pchip.dev = pdata->dev;
+ pdata->pchip.dev = &adev->dev;
pdata->pchip.ops = &ti_sn_pwm_ops;
pdata->pchip.npwm = 1;
pdata->pchip.of_xlate = of_pwm_single_xlate;
pdata->pchip.of_pwm_n_cells = 1;
+ pm_runtime_enable(&adev->dev);
+
return pwmchip_add(&pdata->pchip);
}
@@ -1601,7 +1603,7 @@ static void ti_sn_pwm_remove(struct auxiliary_device *adev)
pwmchip_remove(&pdata->pchip);
if (pdata->pwm_enabled)
- pm_runtime_put_sync(pdata->dev);
+ pm_runtime_put_sync(&adev->dev);
}
static const struct auxiliary_device_id ti_sn_pwm_id_table[] = {
It's the ti_sn65dsi86.pwm auxiliary driver that creates the pwmchip, so let the auxiliary device be the parent of the pwm device. Note that getting a reference to the ti-sn65dsi86's pwm using pwm_get() isn't affected by this change as ti_sn65dsi86_add_aux_device() sets the auxiliary device's of_node to that of the main device. Also change PM runtime tracking and diagnostic messages to use that one. After enabling runtime PM operation for the auxiliary device, all works as expected as parent devices are handled just fine. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- Changes since (implicit) v1 (https://lore.kernel.org/dri-devel/20231127101547.734061-2-u.kleine-koenig@pengutronix.de): - Add a call to pm_runtime_enable() for the aux device (tested and diagnosed by Nikita Travkin). - Rebased to yesterday's next, which required some (easy) conflict resolution for commit c9d99c73940e ("drm/bridge: ti-sn65dsi86: Simplify using pm_runtime_resume_and_get()"). The first submission got a Reviewed-by tag from Douglas Anderson. I'd expect he is fine with the changes in this v2, but to not suggest in his name, I didn't add the tag here. Also it's easier to readd the tag than to drop it if there are new concerns. Best regards Uwe drivers/gpu/drm/bridge/ti-sn65dsi86.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) base-commit: bc63de6e6ba0b16652c5fb4b9c9916b9e7ca1f23