diff mbox series

[2/2] drm/bridge: ti-sn65dsi86: Never increase the length when reading from AUX

Message ID 20231211165526.2.I7b83c0f31aeedc6b1dc98c7c741d3e1f94f040f8@changeid (mailing list archive)
State New, archived
Headers show
Series [1/2] drm/bridge: parade-ps8640: Never increase the length when reading from AUX | expand

Commit Message

Doug Anderson Dec. 12, 2023, 12:55 a.m. UTC
For aux reads, the value `msg->size` indicates the size of the buffer
provided by `msg->buffer`. We should never in any circumstances write
more bytes to the buffer since it may overflow the buffer.

In the ti-sn65dsi86 driver there is one code path that reads the
transfer length from hardware. Even though it's never been seen to be
a problem, we should make extra sure that the hardware isn't
increasing the length since doing so would cause us to overrun the
buffer.

Fixes: 982f589bde7a ("drm/bridge: ti-sn65dsi86: Update reply on aux failures")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 5b8e1dfc458d..7ff465241267 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -527,6 +527,7 @@  static ssize_t ti_sn_aux_transfer(struct drm_dp_aux *aux,
 	u32 request_val = AUX_CMD_REQ(msg->request);
 	u8 *buf = msg->buffer;
 	unsigned int len = msg->size;
+	unsigned int short_len;
 	unsigned int val;
 	int ret;
 	u8 addr_len[SN_AUX_LENGTH_REG + 1 - SN_AUX_ADDR_19_16_REG];
@@ -600,7 +601,8 @@  static ssize_t ti_sn_aux_transfer(struct drm_dp_aux *aux,
 	}
 
 	if (val & AUX_IRQ_STATUS_AUX_SHORT) {
-		ret = regmap_read(pdata->regmap, SN_AUX_LENGTH_REG, &len);
+		ret = regmap_read(pdata->regmap, SN_AUX_LENGTH_REG, &short_len);
+		len = min(len, short_len);
 		if (ret)
 			goto exit;
 	} else if (val & AUX_IRQ_STATUS_NAT_I2C_FAIL) {