| Message ID | 20240205062711.3513-1-rdunlap@infradead.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] drm/panel: re-alphabetize the menu list | expand |
On 05/02/2024 07:27, Randy Dunlap wrote: > A few of the DRM_PANEL entries have become out of alphabetical order, > so move them around a bit to restore alpha order. > > Signed-off-by: Randy Dunlap <rdunlap@infradead.org> > Cc: Neil Armstrong <neil.armstrong@linaro.org> > Cc: Jessica Zhang <quic_jesszhan@quicinc.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Thomas Zimmermann <tzimmermann@suse.de> > Cc: David Airlie <airlied@gmail.com> > Cc: Daniel Vetter <daniel@ffwll.ch> > Cc: dri-devel@lists.freedesktop.org > Cc: Aradhya Bhatia <a-bhatia1@ti.com> > --- > v2: rebase, move more driver entries around > > Aradhya Bhatia <a-bhatia1@ti.com> had responded with Reviewed-by: > for v1, but I mode quite a few additions in v2 so I didn't include > that R-B: here. > > drivers/gpu/drm/panel/Kconfig | 202 ++++++++++++++++---------------- > 1 file changed, 101 insertions(+), 101 deletions(-) > > diff -- a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -76,53 +76,6 @@ config DRM_PANEL_BOE_TV101WUM_NL6 > Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 > 45NA WUXGA PANEL DSI Video Mode panel > > -config DRM_PANEL_DSI_CM > - tristate "Generic DSI command mode panels" > - depends on OF > - depends on DRM_MIPI_DSI > - depends on BACKLIGHT_CLASS_DEVICE > - help > - DRM panel driver for DSI command mode panels with support for > - embedded and external backlights. > - > -config DRM_PANEL_LVDS > - tristate "Generic LVDS panel driver" > - depends on OF > - depends on BACKLIGHT_CLASS_DEVICE > - select VIDEOMODE_HELPERS > - help > - This driver supports LVDS panels that don't require device-specific > - handling of power supplies or control signals. It implements automatic > - backlight handling if the panel is attached to a backlight controller. > - > -config DRM_PANEL_SIMPLE > - tristate "support for simple panels (other than eDP ones)" > - depends on OF > - depends on BACKLIGHT_CLASS_DEVICE > - depends on PM > - select VIDEOMODE_HELPERS > - help > - DRM panel driver for dumb non-eDP panels that need at most a regulator > - and a GPIO to be powered up. Optionally a backlight can be attached so > - that it can be automatically turned off when the panel goes into a > - low power state. > - > -config DRM_PANEL_EDP > - tristate "support for simple Embedded DisplayPort panels" > - depends on OF > - depends on BACKLIGHT_CLASS_DEVICE > - depends on PM > - select VIDEOMODE_HELPERS > - select DRM_DISPLAY_DP_HELPER > - select DRM_DISPLAY_HELPER > - select DRM_DP_AUX_BUS > - select DRM_KMS_HELPER > - help > - DRM panel driver for dumb eDP panels that need at most a regulator and > - a GPIO to be powered up. Optionally a backlight can be attached so > - that it can be automatically turned off when the panel goes into a > - low power state. > - > config DRM_PANEL_EBBG_FT8719 > tristate "EBBG FT8719 panel driver" > depends on OF > @@ -162,6 +115,25 @@ config DRM_PANEL_FEIYANG_FY07024DI26A30D > Say Y if you want to enable support for panels based on the > Feiyang FY07024DI26A30-D MIPI-DSI interface. > > +config DRM_PANEL_DSI_CM > + tristate "Generic DSI command mode panels" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + DRM panel driver for DSI command mode panels with support for > + embedded and external backlights. > + > +config DRM_PANEL_LVDS > + tristate "Generic LVDS panel driver" > + depends on OF > + depends on BACKLIGHT_CLASS_DEVICE > + select VIDEOMODE_HELPERS > + help > + This driver supports LVDS panels that don't require device-specific > + handling of power supplies or control signals. It implements automatic > + backlight handling if the panel is attached to a backlight controller. > + > config DRM_PANEL_HIMAX_HX8394 > tristate "HIMAX HX8394 MIPI-DSI LCD panels" > depends on OF > @@ -251,17 +223,6 @@ config DRM_PANEL_JADARD_JD9365DA_H3 > WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with > 800RGBx1280 dots at maximum. > > -config DRM_PANEL_JDI_LT070ME05000 > - tristate "JDI LT070ME05000 WUXGA DSI panel" > - depends on OF > - depends on DRM_MIPI_DSI > - depends on BACKLIGHT_CLASS_DEVICE > - help > - Say Y here if you want to enable support for JDI DSI video mode > - panel as found in Google Nexus 7 (2013) devices. > - The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses > - 24 bit per pixel. > - > config DRM_PANEL_JDI_LPM102A188A > tristate "JDI LPM102A188A DSI panel" > depends on OF && GPIOLIB > @@ -273,6 +234,17 @@ config DRM_PANEL_JDI_LPM102A188A > The panel has a 2560×1800 resolution. It provides a MIPI DSI interface > to the host. > > +config DRM_PANEL_JDI_LT070ME05000 > + tristate "JDI LT070ME05000 WUXGA DSI panel" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y here if you want to enable support for JDI DSI video mode > + panel as found in Google Nexus 7 (2013) devices. > + The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses > + 24 bit per pixel. > + > config DRM_PANEL_JDI_R63452 > tristate "JDI R63452 Full HD DSI panel" > depends on OF > @@ -326,12 +298,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829 > 24 bit RGB per pixel. It provides a MIPI DSI interface to > the host and has a built-in LED backlight. > > -config DRM_PANEL_SAMSUNG_LD9040 > - tristate "Samsung LD9040 RGB/SPI panel" > - depends on OF && SPI > - depends on BACKLIGHT_CLASS_DEVICE > - select VIDEOMODE_HELPERS > - > config DRM_PANEL_LG_LB035Q02 > tristate "LG LB035Q024573 RGB panel" > depends on GPIOLIB && OF && SPI > @@ -359,6 +325,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966 > with the Magnachip D53E6EA8966 panel IC. This panel receives > video data via DSI but commands via 9-bit SPI using DBI. > > +config DRM_PANEL_MANTIX_MLAF057WE51 > + tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y here if you want to enable support for the Mantix > + MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It > + has a resolution of 720x1440 pixels, a built in backlight and touch > + controller. > + > config DRM_PANEL_NEC_NL8048HL11 > tristate "NEC NL8048HL11 RGB panel" > depends on GPIOLIB && OF && SPI > @@ -447,17 +424,6 @@ config DRM_PANEL_NOVATEK_NT39016 > Say Y here if you want to enable support for the panels built > around the Novatek NT39016 display controller. > > -config DRM_PANEL_MANTIX_MLAF057WE51 > - tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" > - depends on OF > - depends on DRM_MIPI_DSI > - depends on BACKLIGHT_CLASS_DEVICE > - help > - Say Y here if you want to enable support for the Mantix > - MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It > - has a resolution of 720x1440 pixels, a built in backlight and touch > - controller. > - > config DRM_PANEL_OLIMEX_LCD_OLINUXINO > tristate "Olimex LCD-OLinuXino panel" > depends on OF > @@ -554,6 +520,12 @@ config DRM_PANEL_RONBO_RB070D30 > Say Y here if you want to enable support for Ronbo Electronics > RB070D30 1024x600 DSI panel. > > +config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 > + tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" > + depends on OF > + select DRM_MIPI_DSI > + select VIDEOMODE_HELPERS > + > config DRM_PANEL_SAMSUNG_ATNA33XC20 > tristate "Samsung ATNA33XC20 eDP panel" > depends on OF > @@ -577,6 +549,12 @@ config DRM_PANEL_SAMSUNG_DB7430 > DB7430 DPI display controller used in such devices as the > LMS397KF04 480x800 DPI panel. > > +config DRM_PANEL_SAMSUNG_LD9040 > + tristate "Samsung LD9040 RGB/SPI panel" > + depends on OF && SPI > + depends on BACKLIGHT_CLASS_DEVICE > + select VIDEOMODE_HELPERS > + > config DRM_PANEL_SAMSUNG_S6D16D0 > tristate "Samsung S6D16D0 DSI video mode panel" > depends on OF > @@ -642,12 +620,6 @@ config DRM_PANEL_SAMSUNG_S6E63M0_DSI > Say Y here if you want to be able to access the Samsung > S6E63M0 panel using DSI. > > -config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 > - tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" > - depends on OF > - select DRM_MIPI_DSI > - select VIDEOMODE_HELPERS > - > config DRM_PANEL_SAMSUNG_S6E8AA0 > tristate "Samsung S6E8AA0 DSI video mode panel" > depends on OF > @@ -746,15 +718,6 @@ config DRM_PANEL_SITRONIX_ST7789V > Say Y here if you want to enable support for the Sitronix > ST7789V controller for 240x320 LCD panels > > -config DRM_PANEL_SYNAPTICS_R63353 > - tristate "Synaptics R63353-based panels" > - depends on OF > - depends on DRM_MIPI_DSI > - depends on BACKLIGHT_CLASS_DEVICE > - help > - Say Y if you want to enable support for panels based on the > - Synaptics R63353 controller. > - > config DRM_PANEL_SONY_ACX565AKM > tristate "Sony ACX565AKM panel" > depends on GPIOLIB && OF && SPI > @@ -794,6 +757,43 @@ config DRM_PANEL_STARTEK_KD070FHFID015 > with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to > the host, a built-in LED backlight and touch controller. > > +config DRM_PANEL_EDP > + tristate "support for simple Embedded DisplayPort panels" > + depends on OF > + depends on BACKLIGHT_CLASS_DEVICE > + depends on PM > + select VIDEOMODE_HELPERS > + select DRM_DISPLAY_DP_HELPER > + select DRM_DISPLAY_HELPER > + select DRM_DP_AUX_BUS > + select DRM_KMS_HELPER > + help > + DRM panel driver for dumb eDP panels that need at most a regulator and > + a GPIO to be powered up. Optionally a backlight can be attached so > + that it can be automatically turned off when the panel goes into a > + low power state. > + > +config DRM_PANEL_SIMPLE > + tristate "support for simple panels (other than eDP ones)" > + depends on OF > + depends on BACKLIGHT_CLASS_DEVICE > + depends on PM > + select VIDEOMODE_HELPERS > + help > + DRM panel driver for dumb non-eDP panels that need at most a regulator > + and a GPIO to be powered up. Optionally a backlight can be attached so > + that it can be automatically turned off when the panel goes into a > + low power state. > + > +config DRM_PANEL_SYNAPTICS_R63353 > + tristate "Synaptics R63353-based panels" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y if you want to enable support for panels based on the > + Synaptics R63353 controller. > + > config DRM_PANEL_TDO_TL070WSH30 > tristate "TDO TL070WSH30 DSI panel" > depends on OF > @@ -837,6 +837,17 @@ config DRM_PANEL_TRULY_NT35597_WQXGA > Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI > Video Mode panel > > +config DRM_PANEL_VISIONOX_R66451 > + tristate "Visionox R66451" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + select DRM_DISPLAY_DP_HELPER > + select DRM_DISPLAY_HELPER > + help > + Say Y here if you want to enable support for Visionox > + R66451 1080x2340 AMOLED DSI panel. > + > config DRM_PANEL_VISIONOX_RM69299 > tristate "Visionox RM69299" > depends on OF > @@ -854,17 +865,6 @@ config DRM_PANEL_VISIONOX_VTDR6130 > Say Y here if you want to enable support for Visionox > VTDR6130 1080x2400 AMOLED DSI panel. > > -config DRM_PANEL_VISIONOX_R66451 > - tristate "Visionox R66451" > - depends on OF > - depends on DRM_MIPI_DSI > - depends on BACKLIGHT_CLASS_DEVICE > - select DRM_DISPLAY_DP_HELPER > - select DRM_DISPLAY_HELPER > - help > - Say Y here if you want to enable support for Visionox > - R66451 1080x2340 AMOLED DSI panel. > - > config DRM_PANEL_WIDECHIPS_WS2401 > tristate "Widechips WS2401 DPI panel driver" > depends on SPI && GPIOLIB Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Hi, On Sun, 04 Feb 2024 22:27:08 -0800, Randy Dunlap wrote: > A few of the DRM_PANEL entries have become out of alphabetical order, > so move them around a bit to restore alpha order. > > Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next) [1/1] drm/panel: re-alphabetize the menu list https://cgit.freedesktop.org/drm/drm-misc/commit/?id=aaf7f80996834ae5e2fd46d03f6fdb852cfa9911
diff -- a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -76,53 +76,6 @@ config DRM_PANEL_BOE_TV101WUM_NL6 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 45NA WUXGA PANEL DSI Video Mode panel -config DRM_PANEL_DSI_CM - tristate "Generic DSI command mode panels" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - help - DRM panel driver for DSI command mode panels with support for - embedded and external backlights. - -config DRM_PANEL_LVDS - tristate "Generic LVDS panel driver" - depends on OF - depends on BACKLIGHT_CLASS_DEVICE - select VIDEOMODE_HELPERS - help - This driver supports LVDS panels that don't require device-specific - handling of power supplies or control signals. It implements automatic - backlight handling if the panel is attached to a backlight controller. - -config DRM_PANEL_SIMPLE - tristate "support for simple panels (other than eDP ones)" - depends on OF - depends on BACKLIGHT_CLASS_DEVICE - depends on PM - select VIDEOMODE_HELPERS - help - DRM panel driver for dumb non-eDP panels that need at most a regulator - and a GPIO to be powered up. Optionally a backlight can be attached so - that it can be automatically turned off when the panel goes into a - low power state. - -config DRM_PANEL_EDP - tristate "support for simple Embedded DisplayPort panels" - depends on OF - depends on BACKLIGHT_CLASS_DEVICE - depends on PM - select VIDEOMODE_HELPERS - select DRM_DISPLAY_DP_HELPER - select DRM_DISPLAY_HELPER - select DRM_DP_AUX_BUS - select DRM_KMS_HELPER - help - DRM panel driver for dumb eDP panels that need at most a regulator and - a GPIO to be powered up. Optionally a backlight can be attached so - that it can be automatically turned off when the panel goes into a - low power state. - config DRM_PANEL_EBBG_FT8719 tristate "EBBG FT8719 panel driver" depends on OF @@ -162,6 +115,25 @@ config DRM_PANEL_FEIYANG_FY07024DI26A30D Say Y if you want to enable support for panels based on the Feiyang FY07024DI26A30-D MIPI-DSI interface. +config DRM_PANEL_DSI_CM + tristate "Generic DSI command mode panels" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + DRM panel driver for DSI command mode panels with support for + embedded and external backlights. + +config DRM_PANEL_LVDS + tristate "Generic LVDS panel driver" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + select VIDEOMODE_HELPERS + help + This driver supports LVDS panels that don't require device-specific + handling of power supplies or control signals. It implements automatic + backlight handling if the panel is attached to a backlight controller. + config DRM_PANEL_HIMAX_HX8394 tristate "HIMAX HX8394 MIPI-DSI LCD panels" depends on OF @@ -251,17 +223,6 @@ config DRM_PANEL_JADARD_JD9365DA_H3 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 800RGBx1280 dots at maximum. -config DRM_PANEL_JDI_LT070ME05000 - tristate "JDI LT070ME05000 WUXGA DSI panel" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - help - Say Y here if you want to enable support for JDI DSI video mode - panel as found in Google Nexus 7 (2013) devices. - The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses - 24 bit per pixel. - config DRM_PANEL_JDI_LPM102A188A tristate "JDI LPM102A188A DSI panel" depends on OF && GPIOLIB @@ -273,6 +234,17 @@ config DRM_PANEL_JDI_LPM102A188A The panel has a 2560×1800 resolution. It provides a MIPI DSI interface to the host. +config DRM_PANEL_JDI_LT070ME05000 + tristate "JDI LT070ME05000 WUXGA DSI panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for JDI DSI video mode + panel as found in Google Nexus 7 (2013) devices. + The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses + 24 bit per pixel. + config DRM_PANEL_JDI_R63452 tristate "JDI R63452 Full HD DSI panel" depends on OF @@ -326,12 +298,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. -config DRM_PANEL_SAMSUNG_LD9040 - tristate "Samsung LD9040 RGB/SPI panel" - depends on OF && SPI - depends on BACKLIGHT_CLASS_DEVICE - select VIDEOMODE_HELPERS - config DRM_PANEL_LG_LB035Q02 tristate "LG LB035Q024573 RGB panel" depends on GPIOLIB && OF && SPI @@ -359,6 +325,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966 with the Magnachip D53E6EA8966 panel IC. This panel receives video data via DSI but commands via 9-bit SPI using DBI. +config DRM_PANEL_MANTIX_MLAF057WE51 + tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the Mantix + MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It + has a resolution of 720x1440 pixels, a built in backlight and touch + controller. + config DRM_PANEL_NEC_NL8048HL11 tristate "NEC NL8048HL11 RGB panel" depends on GPIOLIB && OF && SPI @@ -447,17 +424,6 @@ config DRM_PANEL_NOVATEK_NT39016 Say Y here if you want to enable support for the panels built around the Novatek NT39016 display controller. -config DRM_PANEL_MANTIX_MLAF057WE51 - tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - help - Say Y here if you want to enable support for the Mantix - MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It - has a resolution of 720x1440 pixels, a built in backlight and touch - controller. - config DRM_PANEL_OLIMEX_LCD_OLINUXINO tristate "Olimex LCD-OLinuXino panel" depends on OF @@ -554,6 +520,12 @@ config DRM_PANEL_RONBO_RB070D30 Say Y here if you want to enable support for Ronbo Electronics RB070D30 1024x600 DSI panel. +config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 + tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" + depends on OF + select DRM_MIPI_DSI + select VIDEOMODE_HELPERS + config DRM_PANEL_SAMSUNG_ATNA33XC20 tristate "Samsung ATNA33XC20 eDP panel" depends on OF @@ -577,6 +549,12 @@ config DRM_PANEL_SAMSUNG_DB7430 DB7430 DPI display controller used in such devices as the LMS397KF04 480x800 DPI panel. +config DRM_PANEL_SAMSUNG_LD9040 + tristate "Samsung LD9040 RGB/SPI panel" + depends on OF && SPI + depends on BACKLIGHT_CLASS_DEVICE + select VIDEOMODE_HELPERS + config DRM_PANEL_SAMSUNG_S6D16D0 tristate "Samsung S6D16D0 DSI video mode panel" depends on OF @@ -642,12 +620,6 @@ config DRM_PANEL_SAMSUNG_S6E63M0_DSI Say Y here if you want to be able to access the Samsung S6E63M0 panel using DSI. -config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 - tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" - depends on OF - select DRM_MIPI_DSI - select VIDEOMODE_HELPERS - config DRM_PANEL_SAMSUNG_S6E8AA0 tristate "Samsung S6E8AA0 DSI video mode panel" depends on OF @@ -746,15 +718,6 @@ config DRM_PANEL_SITRONIX_ST7789V Say Y here if you want to enable support for the Sitronix ST7789V controller for 240x320 LCD panels -config DRM_PANEL_SYNAPTICS_R63353 - tristate "Synaptics R63353-based panels" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - help - Say Y if you want to enable support for panels based on the - Synaptics R63353 controller. - config DRM_PANEL_SONY_ACX565AKM tristate "Sony ACX565AKM panel" depends on GPIOLIB && OF && SPI @@ -794,6 +757,43 @@ config DRM_PANEL_STARTEK_KD070FHFID015 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. +config DRM_PANEL_EDP + tristate "support for simple Embedded DisplayPort panels" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + depends on PM + select VIDEOMODE_HELPERS + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + select DRM_DP_AUX_BUS + select DRM_KMS_HELPER + help + DRM panel driver for dumb eDP panels that need at most a regulator and + a GPIO to be powered up. Optionally a backlight can be attached so + that it can be automatically turned off when the panel goes into a + low power state. + +config DRM_PANEL_SIMPLE + tristate "support for simple panels (other than eDP ones)" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + depends on PM + select VIDEOMODE_HELPERS + help + DRM panel driver for dumb non-eDP panels that need at most a regulator + and a GPIO to be powered up. Optionally a backlight can be attached so + that it can be automatically turned off when the panel goes into a + low power state. + +config DRM_PANEL_SYNAPTICS_R63353 + tristate "Synaptics R63353-based panels" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y if you want to enable support for panels based on the + Synaptics R63353 controller. + config DRM_PANEL_TDO_TL070WSH30 tristate "TDO TL070WSH30 DSI panel" depends on OF @@ -837,6 +837,17 @@ config DRM_PANEL_TRULY_NT35597_WQXGA Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI Video Mode panel +config DRM_PANEL_VISIONOX_R66451 + tristate "Visionox R66451" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + help + Say Y here if you want to enable support for Visionox + R66451 1080x2340 AMOLED DSI panel. + config DRM_PANEL_VISIONOX_RM69299 tristate "Visionox RM69299" depends on OF @@ -854,17 +865,6 @@ config DRM_PANEL_VISIONOX_VTDR6130 Say Y here if you want to enable support for Visionox VTDR6130 1080x2400 AMOLED DSI panel. -config DRM_PANEL_VISIONOX_R66451 - tristate "Visionox R66451" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - select DRM_DISPLAY_DP_HELPER - select DRM_DISPLAY_HELPER - help - Say Y here if you want to enable support for Visionox - R66451 1080x2340 AMOLED DSI panel. - config DRM_PANEL_WIDECHIPS_WS2401 tristate "Widechips WS2401 DPI panel driver" depends on SPI && GPIOLIB
A few of the DRM_PANEL entries have become out of alphabetical order, so move them around a bit to restore alpha order. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Jessica Zhang <quic_jesszhan@quicinc.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Aradhya Bhatia <a-bhatia1@ti.com> --- v2: rebase, move more driver entries around Aradhya Bhatia <a-bhatia1@ti.com> had responded with Reviewed-by: for v1, but I mode quite a few additions in v2 so I didn't include that R-B: here. drivers/gpu/drm/panel/Kconfig | 202 ++++++++++++++++---------------- 1 file changed, 101 insertions(+), 101 deletions(-)