diff mbox series

[v5,13/14] dt-bindings: gpu: mali-valhall-csf: Add support for Arm Mali CSF GPUs

Message ID 20240218214131.3035480-14-boris.brezillon@collabora.com (mailing list archive)
State New, archived
Headers show
Series drm: Add a driver for CSF-based Mali GPUs | expand

Commit Message

Boris Brezillon Feb. 18, 2024, 9:41 p.m. UTC 
From: Liviu Dudau <liviu.dudau@arm.com>

Arm has introduced a new v10 GPU architecture that replaces the Job Manager
interface with a new Command Stream Frontend. It adds firmware driven
command stream queues that can be used by kernel and user space to submit
jobs to the GPU.

Add the initial schema for the device tree that is based on support for
RK3588 SoC. The minimum number of clocks is one for the IP, but on Rockchip
platforms they will tend to expose the semi-independent clocks for better
power management.

v5:
- Move the opp-table node under the gpu node

v4:
- Fix formatting issue

v3:
- Cleanup commit message to remove redundant text
- Added opp-table property and re-ordered entries
- Clarified power-domains and power-domain-names requirements for RK3588.
- Cleaned up example

Note: power-domains and power-domain-names requirements for other platforms
are still work in progress, hence the bindings are left incomplete here.

v2:
- New commit

Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/gpu/arm,mali-valhall-csf.yaml    | 147 ++++++++++++++++++
 1 file changed, 147 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml
new file mode 100644
index 000000000000..a5b4e0021758
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml
@@ -0,0 +1,147 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-valhall-csf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Valhall GPU
+
+maintainers:
+  - Liviu Dudau <liviu.dudau@arm.com>
+  - Boris Brezillon <boris.brezillon@collabora.com>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - rockchip,rk3588-mali
+          - const: arm,mali-valhall-csf   # Mali Valhall GPU model/revision is fully discoverable
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Job interrupt
+      - description: MMU interrupt
+      - description: GPU interrupt
+
+  interrupt-names:
+    items:
+      - const: job
+      - const: mmu
+      - const: gpu
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: coregroup
+      - const: stacks
+
+  mali-supply: true
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  power-domains:
+    minItems: 1
+    maxItems: 5
+
+  power-domain-names:
+    minItems: 1
+    maxItems: 5
+
+  sram-supply: true
+
+  "#cooling-cells":
+    const: 2
+
+  dynamic-power-coefficient:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      A u32 value that represents the running time dynamic
+      power coefficient in units of uW/MHz/V^2. The
+      coefficient can either be calculated from power
+      measurements or derived by analysis.
+
+      The dynamic power consumption of the GPU is
+      proportional to the square of the Voltage (V) and
+      the clock frequency (f). The coefficient is used to
+      calculate the dynamic power as below -
+
+      Pdyn = dynamic-power-coefficient * V^2 * f
+
+      where voltage is in V, frequency is in MHz.
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - mali-supply
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-mali
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3588-power.h>
+
+    gpu: gpu@fb000000 {
+        compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf";
+        reg = <0xfb000000 0x200000>;
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "job", "mmu", "gpu";
+        clock-names = "core", "coregroup", "stacks";
+        clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>,
+                 <&cru CLK_GPU_STACKS>;
+        power-domains = <&power RK3588_PD_GPU>;
+        operating-points-v2 = <&gpu_opp_table>;
+        mali-supply = <&vdd_gpu_s0>;
+        sram-supply = <&vdd_gpu_mem_s0>;
+
+        gpu_opp_table: opp-table {
+            compatible = "operating-points-v2";
+            opp-300000000 {
+                opp-hz = /bits/ 64 <300000000>;
+                opp-microvolt = <675000 675000 850000>;
+            };
+            opp-400000000 {
+                opp-hz = /bits/ 64 <400000000>;
+                opp-microvolt = <675000 675000 850000>;
+            };
+        };
+    };
+
+...