diff mbox series

[2/9] arm64: dts: qcom: sc7280: Make eDP/DP controller default DP

Message ID 20240221-rb3gen2-dp-connector-v1-2-dc0964ef7d96@quicinc.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: qcom: qcs6490-rb3gen2: Enable two displays | expand

Commit Message

Bjorn Andersson Feb. 21, 2024, 11:19 p.m. UTC
The newly introduced mechanism for selecting eDP mode allow us to make a
DisplayPort controller operate in eDP mode, but not the other way
around. The qcom,sc7280-edp compatible is obviously tied to eDP, so this
would not allow us to select DisplayPort-mode.

Switch the compatible of the mdss_edp instance and make it eDP for the
SC7280 qcard.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 2 ++
 arch/arm64/boot/dts/qcom/sc7280.dtsi       | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

Comments

Dmitry Baryshkov Feb. 21, 2024, 11:43 p.m. UTC | #1
On Thu, 22 Feb 2024 at 01:19, Bjorn Andersson <quic_bjorande@quicinc.com> wrote:
>
> The newly introduced mechanism for selecting eDP mode allow us to make a
> DisplayPort controller operate in eDP mode, but not the other way
> around. The qcom,sc7280-edp compatible is obviously tied to eDP, so this
> would not allow us to select DisplayPort-mode.
>
> Switch the compatible of the mdss_edp instance and make it eDP for the
> SC7280 qcard.
>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 2 ++
>  arch/arm64/boot/dts/qcom/sc7280.dtsi       | 2 +-
>  2 files changed, 3 insertions(+), 1 deletion(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Konrad Dybcio Feb. 22, 2024, 8:55 a.m. UTC | #2
On 2/22/24 00:19, Bjorn Andersson wrote:
> The newly introduced mechanism for selecting eDP mode allow us to make a
> DisplayPort controller operate in eDP mode, but not the other way
> around. The qcom,sc7280-edp compatible is obviously tied to eDP, so this
> would not allow us to select DisplayPort-mode.
> 
> Switch the compatible of the mdss_edp instance and make it eDP for the
> SC7280 qcard.
> 
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index f9b96bd2477e..e339b181a9ac 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -348,6 +348,8 @@  &lpass_va_macro {
 
 /* NOTE: Not all Qcards have eDP connector stuffed */
 &mdss_edp {
+	is-edp;
+
 	aux-bus {
 		edp_panel: panel {
 			compatible = "edp-panel";
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 581818676a4c..a19c278ebec9 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4513,7 +4513,7 @@  mdss_dsi_phy: phy@ae94400 {
 			};
 
 			mdss_edp: edp@aea0000 {
-				compatible = "qcom,sc7280-edp";
+				compatible = "qcom,sc7280-dp";
 				pinctrl-names = "default";
 				pinctrl-0 = <&edp_hot_plug_det>;