diff mbox series

[v5,8/8] usb: misc: onboard_hub: add support for XMOS XVF3500

Message ID 20240228-onboard_xvf3500-v5-8-76b805fd3fe6@wolfvision.net (mailing list archive)
State New, archived
Headers show
Series usb: misc: onboard_hub: add support for XMOS XVF3500 | expand

Commit Message

Javier Carrasco Feb. 28, 2024, 1:51 p.m. UTC
The XMOS XVF3500 VocalFusion Voice Processor[1] is a low-latency, 32-bit
multicore controller for voice processing.

This device requires a specific power sequence, which consists of
enabling the regulators that control the 3V3 and 1V0 device supplies,
and a reset de-assertion after a delay of at least 100ns. Such power
sequence is already supported by the onboard_hub driver, and it can be
reused for non-hub USB devices as well.

Once in normal operation, the XVF3500 registers itself as a USB device,
and it does not require any device-specific operations in the driver.

[1] https://www.xmos.com/xvf3500/

Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
---
 drivers/usb/misc/onboard_usb_dev.c | 2 ++
 drivers/usb/misc/onboard_usb_dev.h | 8 ++++++++
 2 files changed, 10 insertions(+)

Comments

Matthias Kaehlcke Feb. 28, 2024, 7:22 p.m. UTC | #1
On Wed, Feb 28, 2024 at 02:51:35PM +0100, Javier Carrasco wrote:
> The XMOS XVF3500 VocalFusion Voice Processor[1] is a low-latency, 32-bit
> multicore controller for voice processing.
> 
> This device requires a specific power sequence, which consists of
> enabling the regulators that control the 3V3 and 1V0 device supplies,
> and a reset de-assertion after a delay of at least 100ns. Such power
> sequence is already supported by the onboard_hub driver, and it can be
> reused for non-hub USB devices as well.

Please update the commit message, the onboard_hub driver no longer
exists as such with the other patches of this series.

> Once in normal operation, the XVF3500 registers itself as a USB device,
> and it does not require any device-specific operations in the driver.
> 
> [1] https://www.xmos.com/xvf3500/
> 
> Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>

Acked-by: Matthias Kaehlcke <mka@chromium.org>

> ---
>  drivers/usb/misc/onboard_usb_dev.c | 2 ++
>  drivers/usb/misc/onboard_usb_dev.h | 8 ++++++++
>  2 files changed, 10 insertions(+)
> 
> diff --git a/drivers/usb/misc/onboard_usb_dev.c b/drivers/usb/misc/onboard_usb_dev.c
> index df0ed172c7ec..50f84c5278a2 100644
> --- a/drivers/usb/misc/onboard_usb_dev.c
> +++ b/drivers/usb/misc/onboard_usb_dev.c
> @@ -405,6 +405,7 @@ static struct platform_driver onboard_dev_driver = {
>  #define VENDOR_ID_REALTEK	0x0bda
>  #define VENDOR_ID_TI		0x0451
>  #define VENDOR_ID_VIA		0x2109
> +#define VENDOR_ID_XMOS		0x20B1
>  
>  /*
>   * Returns the onboard_dev platform device that is associated with the USB
> @@ -497,6 +498,7 @@ static const struct usb_device_id onboard_dev_id_table[] = {
>  	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
>  	{ USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817 3.1 */
>  	{ USB_DEVICE(VENDOR_ID_VIA, 0x2817) }, /* VIA VL817 2.0 */
> +	{ USB_DEVICE(VENDOR_ID_XMOS, 0x0013) }, /* XVF3500 */

nit: be a bit more specific? e.g. XVF3500 Voice Processor, or XMOS XVF3500

The other entries were implicitly hubs since this was the 'onboard_hub'
driver. It wouldn't be a bad idea to add 'hub' to these entries in the
patch that 'renames' the driver.
diff mbox series

Patch

diff --git a/drivers/usb/misc/onboard_usb_dev.c b/drivers/usb/misc/onboard_usb_dev.c
index df0ed172c7ec..50f84c5278a2 100644
--- a/drivers/usb/misc/onboard_usb_dev.c
+++ b/drivers/usb/misc/onboard_usb_dev.c
@@ -405,6 +405,7 @@  static struct platform_driver onboard_dev_driver = {
 #define VENDOR_ID_REALTEK	0x0bda
 #define VENDOR_ID_TI		0x0451
 #define VENDOR_ID_VIA		0x2109
+#define VENDOR_ID_XMOS		0x20B1
 
 /*
  * Returns the onboard_dev platform device that is associated with the USB
@@ -497,6 +498,7 @@  static const struct usb_device_id onboard_dev_id_table[] = {
 	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
 	{ USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817 3.1 */
 	{ USB_DEVICE(VENDOR_ID_VIA, 0x2817) }, /* VIA VL817 2.0 */
+	{ USB_DEVICE(VENDOR_ID_XMOS, 0x0013) }, /* XVF3500 */
 	{}
 };
 MODULE_DEVICE_TABLE(usb, onboard_dev_id_table);
diff --git a/drivers/usb/misc/onboard_usb_dev.h b/drivers/usb/misc/onboard_usb_dev.h
index 106480ce72b5..858f5814165a 100644
--- a/drivers/usb/misc/onboard_usb_dev.h
+++ b/drivers/usb/misc/onboard_usb_dev.h
@@ -78,6 +78,13 @@  static const struct onboard_dev_pdata vialab_vl817_data = {
 	.is_hub = true,
 };
 
+static const struct onboard_dev_pdata xmos_xvf3500_data = {
+	.reset_us = 1,
+	.num_supplies = 2,
+	.supply_names = { "vdd", "vddio" },
+	.is_hub = false,
+};
+
 static const struct of_device_id onboard_dev_match[] = {
 	{ .compatible = "usb424,2412", .data = &microchip_usb424_data, },
 	{ .compatible = "usb424,2514", .data = &microchip_usb424_data, },
@@ -99,6 +106,7 @@  static const struct of_device_id onboard_dev_match[] = {
 	{ .compatible = "usbbda,5414", .data = &realtek_rts5411_data, },
 	{ .compatible = "usb2109,817", .data = &vialab_vl817_data, },
 	{ .compatible = "usb2109,2817", .data = &vialab_vl817_data, },
+	{ .compatible = "usb20b1,0013", .data = &xmos_xvf3500_data, },
 	{}
 };