Message ID | 20240302212757.1871164-1-paroga@paroga.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [1/2] dt-bindings: backlight: Add Texas Instruments LM3509 bindings | expand |
On 02/03/2024 22:27, Patrick Gansterer wrote: > Add Device Tree bindings for Texas Instruments LM3509 - a > High Efficiency Boost for White LED's and/or OLED Displays > > Signed-off-by: Patrick Gansterer <paroga@paroga.com> A nit, subject: drop second/last, redundant "bindings". The "dt-bindings" prefix is already stating that these are bindings. See also: https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18 > --- > .../bindings/leds/backlight/ti,lm3509.yaml | 81 +++++++++++++++++++ > 1 file changed, 81 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml > > diff --git a/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml b/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml > new file mode 100644 > index 000000000000..8fbb83934e30 > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml > @@ -0,0 +1,81 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/leds/backlight/ti,lm3509.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: TI LM3509 High Efficiency Boost for White LED's and/or OLED Displays > + > +maintainers: > + - Patrick Gansterer <paroga@paroga.com> > + > +description: | Do not need '|' unless you need to preserve formatting. > + The LM3509 current mode boost converter offers two separate outputs. > + https://www.ti.com/product/LM3509 > + Missing allOf with ref to common.yaml > +properties: > + compatible: > + const: ti,lm3509 > + > + reg: > + maxItems: 1 > + > + reset-gpios: > + maxItems: 1 > + > + default-brightness: > + minimum: 0 > + maximum: 15 > + > + max-brightness: > + minimum: 0 > + maximum: 15 > + > + ti,brightness-rate-of-change-us: > + description: Brightness Rate of Change in microseconds. > + enum: [51, 13000, 26000, 52000] > + > + ti,oled-mode: > + description: Enable OLED mode. > + type: boolean > + > + ti,unison-mode: > + description: | Do not need '|' unless you need to preserve formatting. > + Enable unison mode. If disabled, then it will provide two > + independent controllable LED currents for BMAIN and BSUB. > + type: boolean > + > +required: > + - compatible > + - reg > + > +additionalProperties: false unevaluatedProperties instead (open existing bindings and look how they do it). > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + backlight@36 { > + compatible = "ti,lm3509"; > + reg = <0x36>; > + > + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; > + > + ti,unison-mode; > + }; > + }; > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + backlight@36 { > + compatible = "ti,lm3509"; > + reg = <0x36>; > + > + ti,brightness-rate-of-change-us = <52000>; Just combine these examples. > + }; > + }; Best regards, Krzysztof
On Sat, Mar 02, 2024 at 10:27:56PM +0100, Patrick Gansterer wrote: > Add Device Tree bindings for Texas Instruments LM3509 - a > High Efficiency Boost for White LED's and/or OLED Displays > > Signed-off-by: Patrick Gansterer <paroga@paroga.com> > --- > <snip> > + ti,unison-mode: > + description: | > + Enable unison mode. If disabled, then it will provide two > + independent controllable LED currents for BMAIN and BSUB. > + type: boolean How does not-unison mode interact with the backlight property in panel-common.yaml ? If this mode intended to provide two strings that can be controlled by different panels then a phandle link will no longer be sufficient to describe the connectivity. Daniel.
diff --git a/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml b/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml new file mode 100644 index 000000000000..8fbb83934e30 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/ti,lm3509.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LM3509 High Efficiency Boost for White LED's and/or OLED Displays + +maintainers: + - Patrick Gansterer <paroga@paroga.com> + +description: | + The LM3509 current mode boost converter offers two separate outputs. + https://www.ti.com/product/LM3509 + +properties: + compatible: + const: ti,lm3509 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + default-brightness: + minimum: 0 + maximum: 15 + + max-brightness: + minimum: 0 + maximum: 15 + + ti,brightness-rate-of-change-us: + description: Brightness Rate of Change in microseconds. + enum: [51, 13000, 26000, 52000] + + ti,oled-mode: + description: Enable OLED mode. + type: boolean + + ti,unison-mode: + description: | + Enable unison mode. If disabled, then it will provide two + independent controllable LED currents for BMAIN and BSUB. + type: boolean + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@36 { + compatible = "ti,lm3509"; + reg = <0x36>; + + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + + ti,unison-mode; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@36 { + compatible = "ti,lm3509"; + reg = <0x36>; + + ti,brightness-rate-of-change-us = <52000>; + }; + };
Add Device Tree bindings for Texas Instruments LM3509 - a High Efficiency Boost for White LED's and/or OLED Displays Signed-off-by: Patrick Gansterer <paroga@paroga.com> --- .../bindings/leds/backlight/ti,lm3509.yaml | 81 +++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml