@@ -90,15 +90,15 @@ config DRM_FSL_LDB
help
Support for i.MX8MP DPI-to-LVDS on-SoC encoder.
config DRM_ITE_IT6505
tristate "ITE IT6505 DisplayPort bridge"
+ depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
select DRM_DISPLAY_DP_HELPER
select DRM_DISPLAY_HDCP_HELPER
- select DRM_DISPLAY_DP_AUX_BUS
select DRM_KMS_HELPER
select DRM_DP_HELPER
select EXTCON
select CRYPTO
select CRYPTO_HASH
@@ -224,14 +224,14 @@ config DRM_PARADE_PS8622
help
Parade eDP-LVDS bridge chip driver.
config DRM_PARADE_PS8640
tristate "Parade PS8640 MIPI DSI to eDP Converter"
+ depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
select DRM_DISPLAY_DP_HELPER
- select DRM_DISPLAY_DP_AUX_BUS
select DRM_KMS_HELPER
select DRM_MIPI_DSI
select DRM_PANEL
help
Choose this option if you have PS8640 for display
@@ -379,19 +379,19 @@ config DRM_TI_SN65DSI83
help
Texas Instruments SN65DSI83 and SN65DSI84 DSI to LVDS Bridge driver
config DRM_TI_SN65DSI86
tristate "TI SN65DSI86 DSI to eDP bridge"
+ depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
select DRM_DISPLAY_DP_HELPER
select DRM_KMS_HELPER
select REGMAP_I2C
select DRM_PANEL
select DRM_MIPI_DSI
select AUXILIARY_BUS
- select DRM_DISPLAY_DP_AUX_BUS
help
Texas Instruments SN65DSI86 DSI to eDP Bridge driver
config DRM_TI_TPD12S015
tristate "TI TPD12S015 HDMI level shifter and ESD protection"
@@ -31,15 +31,15 @@ config DRM_ANALOGIX_DP
depends on DRM
config DRM_ANALOGIX_ANX7625
tristate "Analogix Anx7625 MIPI to DP interface support"
depends on DRM
+ depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
select DRM_DISPLAY_DP_HELPER
select DRM_DISPLAY_HDCP_HELPER
- select DRM_DISPLAY_DP_AUX_BUS
select DRM_MIPI_DSI
help
ANX7625 is an ultra-low power 4K mobile HD transmitter
designed for portable devices. It converts MIPI/DPI to
DisplayPort1.3 4K.
@@ -20,15 +20,15 @@ config DRM_MEDIATEK
This driver provides kernel mode setting and
buffer management to userspace.
config DRM_MEDIATEK_DP
tristate "DRM DPTX Support for MediaTek SoCs"
+ depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on DRM_MEDIATEK
select PHY_MTK_DP
select DRM_DISPLAY_DP_HELPER
- select DRM_DISPLAY_DP_AUX_BUS
help
DRM/KMS Display Port driver for MediaTek SoCs.
config DRM_MEDIATEK_HDMI
tristate "DRM HDMI Support for Mediatek SoCs"
@@ -3,21 +3,21 @@
config DRM_MSM
tristate "MSM DRM"
depends on ARCH_QCOM || SOC_IMX5 || COMPILE_TEST
depends on COMMON_CLK
depends on DRM
+ depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on IOMMU_SUPPORT
depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
depends on QCOM_OCMEM || QCOM_OCMEM=n
depends on QCOM_LLCC || QCOM_LLCC=n
depends on QCOM_COMMAND_DB || QCOM_COMMAND_DB=n
depends on PM
select IOMMU_IO_PGTABLE
select QCOM_MDT_LOADER if ARCH_QCOM
select REGULATOR
- select DRM_DISPLAY_DP_AUX_BUS
select DRM_DISPLAY_DP_HELPER
select DRM_EXEC
select DRM_KMS_HELPER
select DRM_PANEL
select DRM_BRIDGE
@@ -558,15 +558,15 @@ config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
select VIDEOMODE_HELPERS
config DRM_PANEL_SAMSUNG_ATNA33XC20
tristate "Samsung ATNA33XC20 eDP panel"
depends on BACKLIGHT_CLASS_DEVICE
+ depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
depends on PM
select DRM_DISPLAY_DP_HELPER
- select DRM_DISPLAY_DP_AUX_BUS
help
DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
be handled by the DRM_PANEL_SIMPLE driver because its power
sequencing is non-standard.
@@ -798,16 +798,16 @@ config DRM_PANEL_STARTEK_KD070FHFID015
the host, a built-in LED backlight and touch controller.
config DRM_PANEL_EDP
tristate "support for simple Embedded DisplayPort panels"
depends on BACKLIGHT_CLASS_DEVICE
+ depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
depends on PM
select VIDEOMODE_HELPERS
select DRM_DISPLAY_DP_HELPER
- select DRM_DISPLAY_DP_AUX_BUS
select DRM_KMS_HELPER
help
DRM panel driver for dumb eDP panels that need at most a regulator and
a GPIO to be powered up. Optionally a backlight can be attached so
that it can be automatically turned off when the panel goes into a
@@ -2,15 +2,15 @@
config DRM_TEGRA
tristate "NVIDIA Tegra DRM"
depends on ARCH_TEGRA || COMPILE_TEST
depends on COMMON_CLK
depends on DRM
+ depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
select DRM_DISPLAY_DP_HELPER
select DRM_DISPLAY_HDMI_HELPER
- select DRM_DISPLAY_DP_AUX_BUS
select DRM_KMS_HELPER
select DRM_MIPI_DSI
select DRM_PANEL
select FB_DMAMEM_HELPERS if DRM_FBDEV_EMULATION
select TEGRA_HOST1X
Most of our helpers have relied on being selected so far through Kconfig, but that creates issues when we have multiple layers of helpers with some depending on others. Indeed, select doesn't select a dependency's dependencies, and thus isn't super intuitive. Depends on however doesn't have that limitation, so we can just switch all the drivers that were selecting DRM_DISPLAY_DP_AUX_BUS to depend on it. Signed-off-by: Maxime Ripard <mripard@kernel.org> --- drivers/gpu/drm/bridge/Kconfig | 6 +++--- drivers/gpu/drm/bridge/analogix/Kconfig | 2 +- drivers/gpu/drm/mediatek/Kconfig | 2 +- drivers/gpu/drm/msm/Kconfig | 2 +- drivers/gpu/drm/panel/Kconfig | 4 ++-- drivers/gpu/drm/tegra/Kconfig | 2 +- 6 files changed, 9 insertions(+), 9 deletions(-)