@@ -6755,6 +6755,14 @@ S: Maintained
F: Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml
F: drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
+DRM DRIVER FOR LG SW43408 PANELS
+M: Sumit Semwal <sumit.semwal@linaro.org>
+M: Caleb Connolly <caleb.connolly@linaro.org>
+S: Maintained
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml
+F: drivers/gpu/drm/panel/panel-lg-sw43408.c
+
DRM DRIVER FOR LOGICVC DISPLAY CONTROLLER
M: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
S: Supported
@@ -335,6 +335,17 @@ config DRM_PANEL_LG_LG4573
Say Y here if you want to enable support for LG4573 RGB panel.
To compile this driver as a module, choose M here.
+config DRM_PANEL_LG_SW43408
+ tristate "LG SW43408 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for LG sw43408 panel.
+ The panel has a 1080x2160 resolution and uses
+ 24 bit RGB per pixel. It provides a MIPI DSI interface to
+ the host and has a built-in LED backlight.
+
config DRM_PANEL_MAGNACHIP_D53E6EA8966
tristate "Magnachip D53E6EA8966 DSI panel"
depends on OF && SPI
@@ -34,6 +34,7 @@ obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
+obj-$(CONFIG_DRM_PANEL_LG_SW43408) += panel-lg-sw43408.o
obj-$(CONFIG_DRM_PANEL_MAGNACHIP_D53E6EA8966) += panel-magnachip-d53e6ea8966.o
obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
obj-$(CONFIG_DRM_PANEL_NEWVISION_NV3051D) += panel-newvision-nv3051d.o
new file mode 100644
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-2024 Linaro Ltd
+ * Author: Sumit Semwal <sumit.semwal@linaro.org>
+ * Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/display/drm_dsc.h>
+#include <drm/display/drm_dsc_helper.h>
+
+#define NUM_SUPPLIES 2
+
+struct sw43408_panel {
+ struct drm_panel base;
+ struct mipi_dsi_device *link;
+
+ const struct drm_display_mode *mode;
+
+ struct regulator_bulk_data supplies[NUM_SUPPLIES];
+
+ struct gpio_desc *reset_gpio;
+
+ struct drm_dsc_config dsc;
+};
+
+static inline struct sw43408_panel *to_panel_info(struct drm_panel *panel)
+{
+ return container_of(panel, struct sw43408_panel, base);
+}
+
+static int sw43408_unprepare(struct drm_panel *panel)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+ int ret;
+
+ ret = mipi_dsi_dcs_set_display_off(ctx->link);
+ if (ret < 0)
+ dev_err(panel->dev, "set_display_off cmd failed ret = %d\n", ret);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(ctx->link);
+ if (ret < 0)
+ dev_err(panel->dev, "enter_sleep cmd failed ret = %d\n", ret);
+
+ msleep(100);
+
+ gpiod_set_value(ctx->reset_gpio, 1);
+
+ return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static int sw43408_program(struct drm_panel *panel)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+ struct drm_dsc_picture_parameter_set pps;
+ /* Note; this uses a non-standard argument format */
+ u8 dsc_en[] = { 0x11 };
+
+ mipi_dsi_dcs_write_seq(ctx->link, MIPI_DCS_SET_GAMMA_CURVE, 0x02);
+
+ mipi_dsi_dcs_set_tear_on(ctx->link, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+
+ mipi_dsi_dcs_write_seq(ctx->link, 0x53, 0x0c, 0x30);
+ mipi_dsi_dcs_write_seq(ctx->link, 0x55, 0x00, 0x70, 0xdf, 0x00, 0x70, 0xdf);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xf7, 0x01, 0x49, 0x0c);
+
+ mipi_dsi_dcs_exit_sleep_mode(ctx->link);
+
+ msleep(135);
+
+ mipi_dsi_compression_mode_raw(ctx->link, dsc_en, sizeof(dsc_en));
+
+ mipi_dsi_dcs_write_seq(ctx->link, 0xb0, 0xac);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xe5,
+ 0x00, 0x3a, 0x00, 0x3a, 0x00, 0x0e, 0x10);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xb5,
+ 0x75, 0x60, 0x2d, 0x5d, 0x80, 0x00, 0x0a, 0x0b,
+ 0x00, 0x05, 0x0b, 0x00, 0x80, 0x0d, 0x0e, 0x40,
+ 0x00, 0x0c, 0x00, 0x16, 0x00, 0xb8, 0x00, 0x80,
+ 0x0d, 0x0e, 0x40, 0x00, 0x0c, 0x00, 0x16, 0x00,
+ 0xb8, 0x00, 0x81, 0x00, 0x03, 0x03, 0x03, 0x01,
+ 0x01);
+ msleep(85);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xcd,
+ 0x00, 0x00, 0x00, 0x19, 0x19, 0x19, 0x19, 0x19,
+ 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19,
+ 0x16, 0x16);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xcb, 0x80, 0x5c, 0x07, 0x03, 0x28);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xc0, 0x02, 0x02, 0x0f);
+ mipi_dsi_dcs_write_seq(ctx->link, 0x55, 0x04, 0x61, 0xdb, 0x04, 0x70, 0xdb);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xb0, 0xca);
+
+ mipi_dsi_dcs_set_display_on(ctx->link);
+
+ msleep(50);
+
+ ctx->link->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ drm_dsc_pps_payload_pack(&pps, ctx->link->dsc);
+ mipi_dsi_picture_parameter_set(ctx->link, &pps);
+
+ ctx->link->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ return 0;
+}
+
+static int sw43408_prepare(struct drm_panel *panel)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(5000, 6000);
+
+ gpiod_set_value(ctx->reset_gpio, 0);
+ usleep_range(9000, 10000);
+ gpiod_set_value(ctx->reset_gpio, 1);
+ usleep_range(1000, 2000);
+ gpiod_set_value(ctx->reset_gpio, 0);
+ usleep_range(9000, 10000);
+
+ ret = sw43408_program(panel);
+ if (ret)
+ goto poweroff;
+
+ return 0;
+
+poweroff:
+ gpiod_set_value(ctx->reset_gpio, 1);
+ regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ return ret;
+}
+
+static int sw43408_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+
+ return drm_connector_helper_get_modes_fixed(connector, ctx->mode);
+}
+
+static int sw43408_backlight_update_status(struct backlight_device *bl)
+{
+ struct mipi_dsi_device *dsi = bl_get_data(bl);
+ uint16_t brightness = backlight_get_brightness(bl);
+
+ return mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
+}
+
+const struct backlight_ops sw43408_backlight_ops = {
+ .update_status = sw43408_backlight_update_status,
+};
+
+static int sw43408_backlight_init(struct sw43408_panel *ctx)
+{
+ struct device *dev = &ctx->link->dev;
+ const struct backlight_properties props = {
+ .type = BACKLIGHT_PLATFORM,
+ .brightness = 255,
+ .max_brightness = 255,
+ };
+
+ ctx->base.backlight = devm_backlight_device_register(dev, dev_name(dev), dev,
+ ctx->link,
+ &sw43408_backlight_ops,
+ &props);
+
+ if (IS_ERR(ctx->base.backlight))
+ return dev_err_probe(dev, PTR_ERR(ctx->base.backlight),
+ "Failed to create backlight\n");
+
+ return 0;
+}
+
+static const struct drm_panel_funcs sw43408_funcs = {
+ .unprepare = sw43408_unprepare,
+ .prepare = sw43408_prepare,
+ .get_modes = sw43408_get_modes,
+};
+
+static const struct drm_display_mode sw43408_default_mode = {
+ .clock = 152340,
+
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 20,
+ .hsync_end = 1080 + 20 + 32,
+ .htotal = 1080 + 20 + 32 + 20,
+
+ .vdisplay = 2160,
+ .vsync_start = 2160 + 20,
+ .vsync_end = 2160 + 20 + 4,
+ .vtotal = 2160 + 20 + 4 + 20,
+
+ .width_mm = 62,
+ .height_mm = 124,
+
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct of_device_id sw43408_of_match[] = {
+ { .compatible = "lg,sw43408", .data = &sw43408_default_mode },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sw43408_of_match);
+
+static int sw43408_add(struct sw43408_panel *ctx)
+{
+ struct device *dev = &ctx->link->dev;
+ int ret;
+
+ ctx->supplies[0].supply = "vddi"; /* 1.88 V */
+ ctx->supplies[0].init_load_uA = 62000;
+ ctx->supplies[1].supply = "vpnl"; /* 3.0 V */
+ ctx->supplies[1].init_load_uA = 857000;
+
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+ ctx->supplies);
+ if (ret < 0)
+ return ret;
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset_gpio)) {
+ dev_err(dev, "cannot get reset gpio %ld\n",
+ PTR_ERR(ctx->reset_gpio));
+ return PTR_ERR(ctx->reset_gpio);
+ }
+
+ ret = sw43408_backlight_init(ctx);
+ if (ret < 0)
+ return ret;
+
+ ctx->base.prepare_prev_first = true;
+
+ drm_panel_init(&ctx->base, dev, &sw43408_funcs, DRM_MODE_CONNECTOR_DSI);
+
+ drm_panel_add(&ctx->base);
+ return ret;
+}
+
+static int sw43408_probe(struct mipi_dsi_device *dsi)
+{
+ struct sw43408_panel *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->mode = of_device_get_match_data(&dsi->dev);
+ dsi->mode_flags = MIPI_DSI_MODE_LPM;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->lanes = 4;
+
+ ctx->link = dsi;
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ret = sw43408_add(ctx);
+ if (ret < 0)
+ return ret;
+
+ /* The panel is DSC panel only, set the dsc params */
+ ctx->dsc.dsc_version_major = 0x1;
+ ctx->dsc.dsc_version_minor = 0x1;
+
+ /* slice_count * slice_width == width */
+ ctx->dsc.slice_height = 16;
+ ctx->dsc.slice_width = 540;
+ ctx->dsc.slice_count = 2;
+ ctx->dsc.bits_per_component = 8;
+ ctx->dsc.bits_per_pixel = 8 << 4;
+ ctx->dsc.block_pred_enable = true;
+
+ dsi->dsc = &ctx->dsc;
+
+ return mipi_dsi_attach(dsi);
+}
+
+static void sw43408_remove(struct mipi_dsi_device *dsi)
+{
+ struct sw43408_panel *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = sw43408_unprepare(&ctx->base);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to unprepare panel: %d\n",
+ ret);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
+
+ drm_panel_remove(&ctx->base);
+}
+
+static struct mipi_dsi_driver sw43408_driver = {
+ .driver = {
+ .name = "panel-lg-sw43408",
+ .of_match_table = sw43408_of_match,
+ },
+ .probe = sw43408_probe,
+ .remove = sw43408_remove,
+};
+module_mipi_dsi_driver(sw43408_driver);
+
+MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>");
+MODULE_DESCRIPTION("LG SW436408 MIPI-DSI LED panel");
+MODULE_LICENSE("GPL");