diff mbox series

[10/12] drm/client: Use [CONNECTOR:%d:%s] formatting

Message ID 20240404203336.10454-11-ville.syrjala@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series drm/client: Use after free and debug improvements | expand

Commit Message

Ville Syrjala April 4, 2024, 8:33 p.m. UTC
From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Switch to the canonical [CONNECTOR:%d:%s] etc. format for
printing out kms objects.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/drm_client_modeset.c | 65 +++++++++++++++-------------
 1 file changed, 35 insertions(+), 30 deletions(-)

Comments

Jani Nikula April 5, 2024, 8:23 a.m. UTC | #1
On Thu, 04 Apr 2024, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Switch to the canonical [CONNECTOR:%d:%s] etc. format for
> printing out kms objects.

I've been pinging for reviews on [1] for a while now. :/

I'm just doing what you do in patches 9-10 in one go, and I very much
prefer having the [CONNECTOR:%d:%s] bit as the first thing in the
debug. For an individual line your style might read better, but for
reading a log with a bunch of consecutive lines, I think having it as a
prefix reads better.

BR,
Jani.


[1] https://lore.kernel.org/r/f580f7a20bdea45178cef3940b636d491ae3dd92.1709843865.git.jani.nikula@intel.com


>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/drm_client_modeset.c | 65 +++++++++++++++-------------
>  1 file changed, 35 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
> index 1751162b7d5c..415d1799337b 100644
> --- a/drivers/gpu/drm/drm_client_modeset.c
> +++ b/drivers/gpu/drm/drm_client_modeset.c
> @@ -251,8 +251,10 @@ static void drm_client_connectors_enabled(struct drm_device *dev,
>  	for (i = 0; i < connector_count; i++) {
>  		connector = connectors[i];
>  		enabled[i] = drm_connector_enabled(connector, true);
> -		drm_dbg_kms(dev, "connector %d enabled? %s\n", connector->base.id,
> -			    connector->display_info.non_desktop ? "non desktop" : str_yes_no(enabled[i]));
> +		drm_dbg_kms(dev, "[CONNECTOR:%d:%s] enabled? %s\n",
> +			    connector->base.id, connector->name,
> +			    connector->display_info.non_desktop ?
> +			    "non desktop" : str_yes_no(enabled[i]));
>  
>  		any_enabled |= enabled[i];
>  	}
> @@ -368,8 +370,8 @@ static int drm_client_get_tile_offsets(struct drm_device *dev,
>  			continue;
>  
>  		if (!modes[i] && (h_idx || v_idx)) {
> -			drm_dbg_kms(dev, "no modes for connector tiled %d %d\n",
> -				    i, connector->base.id);
> +			drm_dbg_kms(dev, "no modes for tiled [CONNECTOR:%d:%s]\n",
> +				    connector->base.id, connector->name);
>  			continue;
>  		}
>  		if (connector->tile_h_loc < h_idx)
> @@ -438,14 +440,15 @@ static bool drm_client_target_preferred(struct drm_device *dev,
>  			drm_client_get_tile_offsets(dev, connectors, connector_count, modes, offsets, i,
>  						    connector->tile_h_loc, connector->tile_v_loc);
>  		}
> -		drm_dbg_kms(dev, "looking for cmdline mode on connector %d\n",
> -			    connector->base.id);
> +		drm_dbg_kms(dev, "looking for cmdline mode on [CONNECTOR:%d:%s]\n",
> +			    connector->base.id, connector->name);
>  
>  		/* got for command line mode first */
>  		modes[i] = drm_connector_pick_cmdline_mode(connector);
>  		if (!modes[i]) {
> -			drm_dbg_kms(dev, "looking for preferred mode on connector %d %d\n",
> -				    connector->base.id, connector->tile_group ? connector->tile_group->id : 0);
> +			drm_dbg_kms(dev, "looking for preferred mode on [CONNECTOR:%d:%s] (tile group: %d)\n",
> +				    connector->base.id, connector->name,
> +				    connector->tile_group ? connector->tile_group->id : 0);
>  			modes[i] = drm_connector_preferred_mode(connector, width, height);
>  		}
>  		/* No preferred modes, pick one off the list */
> @@ -465,8 +468,8 @@ static bool drm_client_target_preferred(struct drm_device *dev,
>  			    (connector->tile_h_loc == 0 &&
>  			     connector->tile_v_loc == 0 &&
>  			     !drm_connector_get_tiled_mode(connector))) {
> -				drm_dbg_kms(dev, "Falling back to non tiled mode on Connector %d\n",
> -					    connector->base.id);
> +				drm_dbg_kms(dev, "Falling back to non tiled mode on [CONNECTOR:%d:%s]\n",
> +					    connector->base.id, connector->name);
>  				modes[i] = drm_connector_fallback_non_tiled_mode(connector);
>  			} else {
>  				modes[i] = drm_connector_get_tiled_mode(connector);
> @@ -634,15 +637,15 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
>  			num_connectors_detected++;
>  
>  		if (!enabled[i]) {
> -			drm_dbg_kms(dev, "connector %s not enabled, skipping\n",
> -				    connector->name);
> +			drm_dbg_kms(dev, "[CONNECTOR:%d:%s] not enabled, skipping\n",
> +				    connector->base.id, connector->name);
>  			conn_configured |= BIT(i);
>  			continue;
>  		}
>  
>  		if (connector->force == DRM_FORCE_OFF) {
> -			drm_dbg_kms(dev, "connector %s is disabled by user, skipping\n",
> -				    connector->name);
> +			drm_dbg_kms(dev, "[CONNECTOR:%d:%s] is disabled by user, skipping\n",
> +				    connector->base.id, connector->name);
>  			enabled[i] = false;
>  			continue;
>  		}
> @@ -652,8 +655,8 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
>  			if (connector->force > DRM_FORCE_OFF)
>  				goto bail;
>  
> -			drm_dbg_kms(dev, "connector %s has no encoder or crtc, skipping\n",
> -				    connector->name);
> +			drm_dbg_kms(dev, "[CONNECTOR:%d:%s] has no encoder or crtc, skipping\n",
> +				    connector->base.id, connector->name);
>  			enabled[i] = false;
>  			conn_configured |= BIT(i);
>  			continue;
> @@ -675,23 +678,24 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
>  			}
>  		}
>  
> -		drm_dbg_kms(dev, "looking for cmdline mode on connector %s\n",
> -			    connector->name);
> +		drm_dbg_kms(dev, "looking for cmdline mode on [CONNECTOR:%d:%s]\n",
> +			    connector->base.id, connector->name);
>  
>  		/* go for command line mode first */
>  		modes[i] = drm_connector_pick_cmdline_mode(connector);
>  
>  		/* try for preferred next */
>  		if (!modes[i]) {
> -			drm_dbg_kms(dev, "looking for preferred mode on connector %s %d\n",
> -				    connector->name, connector->has_tile);
> +			drm_dbg_kms(dev, "looking for preferred mode on [CONNECTOR:%d:%s] (tiled? %s)\n",
> +				    connector->base.id, connector->name,
> +				    str_yes_no(connector->has_tile));
>  			modes[i] = drm_connector_preferred_mode(connector, width, height);
>  		}
>  
>  		/* No preferred mode marked by the EDID? Are there any modes? */
>  		if (!modes[i] && !list_empty(&connector->modes)) {
> -			drm_dbg_kms(dev, "using first mode listed on connector %s\n",
> -				    connector->name);
> +			drm_dbg_kms(dev, "using first mode listed on [CONNECTOR:%d:%s]\n",
> +				    connector->base.id, connector->name);
>  			modes[i] = drm_connector_first_mode(connector);
>  		}
>  
> @@ -702,8 +706,8 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
>  			 * is dodgy. Switch to crtc->state->mode, after taking
>  			 * care of the resulting locking/lifetime issues.
>  			 */
> -			drm_dbg_kms(dev, "looking for current mode on connector %s\n",
> -				    connector->name);
> +			drm_dbg_kms(dev, "looking for current mode on [CONNECTOR:%d:%s]\n",
> +				    connector->base.id, connector->name);
>  			modes[i] = &connector->state->crtc->mode;
>  		}
>  		/*
> @@ -712,14 +716,14 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
>  		 */
>  		if (connector->has_tile &&
>  		    num_tiled_conns < connector->num_h_tile * connector->num_v_tile) {
> -			drm_dbg_kms(dev, "Falling back to non tiled mode on Connector %d\n",
> -				    connector->base.id);
> +			drm_dbg_kms(dev, "Falling back to non tiled mode on [CONNECTOR:%d:%s]\n",
> +				    connector->base.id, connector->name);
>  			modes[i] = drm_connector_fallback_non_tiled_mode(connector);
>  		}
>  		crtcs[i] = new_crtc;
>  
> -		drm_dbg_kms(dev, "connector %s on [CRTC:%d:%s]: %dx%d%s\n",
> -			    connector->name,
> +		drm_dbg_kms(dev, "[CONNECTOR:%d:%s] on [CRTC:%d:%s]: %dx%d%s\n",
> +			    connector->base.id, connector->name,
>  			    connector->state->crtc->base.id,
>  			    connector->state->crtc->name,
>  			    modes[i]->hdisplay, modes[i]->vdisplay,
> @@ -860,8 +864,9 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width,
>  			struct drm_mode_set *modeset = drm_client_find_modeset(client, crtc);
>  			struct drm_connector *connector = connectors[i];
>  
> -			drm_dbg_kms(dev, "desired mode %s set on crtc %d (%d,%d)\n",
> -				    mode->name, crtc->base.id, offset->x, offset->y);
> +			drm_dbg_kms(dev, "desired mode %s set on [CRTC:%d:%s] (%d,%d)\n",
> +				    mode->name, crtc->base.id, crtc->name,
> +				    offset->x, offset->y);
>  
>  			if (WARN_ON_ONCE(modeset->num_connectors == DRM_CLIENT_MAX_CLONED_CONNECTORS ||
>  					 (dev->mode_config.num_crtc > 1 && modeset->num_connectors == 1))) {
Ville Syrjala April 5, 2024, 8:12 p.m. UTC | #2
On Fri, Apr 05, 2024 at 11:23:01AM +0300, Jani Nikula wrote:
> On Thu, 04 Apr 2024, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > Switch to the canonical [CONNECTOR:%d:%s] etc. format for
> > printing out kms objects.
> 
> I've been pinging for reviews on [1] for a while now. :/
> 
> I'm just doing what you do in patches 9-10 in one go, and I very much
> prefer having the [CONNECTOR:%d:%s] bit as the first thing in the
> debug. For an individual line your style might read better, but for
> reading a log with a bunch of consecutive lines, I think having it as a
> prefix reads better.
> 
> BR,
> Jani.
> 
> 
> [1] https://lore.kernel.org/r/f580f7a20bdea45178cef3940b636d491ae3dd92.1709843865.git.jani.nikula@intel.com
> 

Looks like you have rbs now. I can rebase this
(and see what's left) after your stuff lands.

> 
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> >  drivers/gpu/drm/drm_client_modeset.c | 65 +++++++++++++++-------------
> >  1 file changed, 35 insertions(+), 30 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
> > index 1751162b7d5c..415d1799337b 100644
> > --- a/drivers/gpu/drm/drm_client_modeset.c
> > +++ b/drivers/gpu/drm/drm_client_modeset.c
> > @@ -251,8 +251,10 @@ static void drm_client_connectors_enabled(struct drm_device *dev,
> >  	for (i = 0; i < connector_count; i++) {
> >  		connector = connectors[i];
> >  		enabled[i] = drm_connector_enabled(connector, true);
> > -		drm_dbg_kms(dev, "connector %d enabled? %s\n", connector->base.id,
> > -			    connector->display_info.non_desktop ? "non desktop" : str_yes_no(enabled[i]));
> > +		drm_dbg_kms(dev, "[CONNECTOR:%d:%s] enabled? %s\n",
> > +			    connector->base.id, connector->name,
> > +			    connector->display_info.non_desktop ?
> > +			    "non desktop" : str_yes_no(enabled[i]));
> >  
> >  		any_enabled |= enabled[i];
> >  	}
> > @@ -368,8 +370,8 @@ static int drm_client_get_tile_offsets(struct drm_device *dev,
> >  			continue;
> >  
> >  		if (!modes[i] && (h_idx || v_idx)) {
> > -			drm_dbg_kms(dev, "no modes for connector tiled %d %d\n",
> > -				    i, connector->base.id);
> > +			drm_dbg_kms(dev, "no modes for tiled [CONNECTOR:%d:%s]\n",
> > +				    connector->base.id, connector->name);
> >  			continue;
> >  		}
> >  		if (connector->tile_h_loc < h_idx)
> > @@ -438,14 +440,15 @@ static bool drm_client_target_preferred(struct drm_device *dev,
> >  			drm_client_get_tile_offsets(dev, connectors, connector_count, modes, offsets, i,
> >  						    connector->tile_h_loc, connector->tile_v_loc);
> >  		}
> > -		drm_dbg_kms(dev, "looking for cmdline mode on connector %d\n",
> > -			    connector->base.id);
> > +		drm_dbg_kms(dev, "looking for cmdline mode on [CONNECTOR:%d:%s]\n",
> > +			    connector->base.id, connector->name);
> >  
> >  		/* got for command line mode first */
> >  		modes[i] = drm_connector_pick_cmdline_mode(connector);
> >  		if (!modes[i]) {
> > -			drm_dbg_kms(dev, "looking for preferred mode on connector %d %d\n",
> > -				    connector->base.id, connector->tile_group ? connector->tile_group->id : 0);
> > +			drm_dbg_kms(dev, "looking for preferred mode on [CONNECTOR:%d:%s] (tile group: %d)\n",
> > +				    connector->base.id, connector->name,
> > +				    connector->tile_group ? connector->tile_group->id : 0);
> >  			modes[i] = drm_connector_preferred_mode(connector, width, height);
> >  		}
> >  		/* No preferred modes, pick one off the list */
> > @@ -465,8 +468,8 @@ static bool drm_client_target_preferred(struct drm_device *dev,
> >  			    (connector->tile_h_loc == 0 &&
> >  			     connector->tile_v_loc == 0 &&
> >  			     !drm_connector_get_tiled_mode(connector))) {
> > -				drm_dbg_kms(dev, "Falling back to non tiled mode on Connector %d\n",
> > -					    connector->base.id);
> > +				drm_dbg_kms(dev, "Falling back to non tiled mode on [CONNECTOR:%d:%s]\n",
> > +					    connector->base.id, connector->name);
> >  				modes[i] = drm_connector_fallback_non_tiled_mode(connector);
> >  			} else {
> >  				modes[i] = drm_connector_get_tiled_mode(connector);
> > @@ -634,15 +637,15 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
> >  			num_connectors_detected++;
> >  
> >  		if (!enabled[i]) {
> > -			drm_dbg_kms(dev, "connector %s not enabled, skipping\n",
> > -				    connector->name);
> > +			drm_dbg_kms(dev, "[CONNECTOR:%d:%s] not enabled, skipping\n",
> > +				    connector->base.id, connector->name);
> >  			conn_configured |= BIT(i);
> >  			continue;
> >  		}
> >  
> >  		if (connector->force == DRM_FORCE_OFF) {
> > -			drm_dbg_kms(dev, "connector %s is disabled by user, skipping\n",
> > -				    connector->name);
> > +			drm_dbg_kms(dev, "[CONNECTOR:%d:%s] is disabled by user, skipping\n",
> > +				    connector->base.id, connector->name);
> >  			enabled[i] = false;
> >  			continue;
> >  		}
> > @@ -652,8 +655,8 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
> >  			if (connector->force > DRM_FORCE_OFF)
> >  				goto bail;
> >  
> > -			drm_dbg_kms(dev, "connector %s has no encoder or crtc, skipping\n",
> > -				    connector->name);
> > +			drm_dbg_kms(dev, "[CONNECTOR:%d:%s] has no encoder or crtc, skipping\n",
> > +				    connector->base.id, connector->name);
> >  			enabled[i] = false;
> >  			conn_configured |= BIT(i);
> >  			continue;
> > @@ -675,23 +678,24 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
> >  			}
> >  		}
> >  
> > -		drm_dbg_kms(dev, "looking for cmdline mode on connector %s\n",
> > -			    connector->name);
> > +		drm_dbg_kms(dev, "looking for cmdline mode on [CONNECTOR:%d:%s]\n",
> > +			    connector->base.id, connector->name);
> >  
> >  		/* go for command line mode first */
> >  		modes[i] = drm_connector_pick_cmdline_mode(connector);
> >  
> >  		/* try for preferred next */
> >  		if (!modes[i]) {
> > -			drm_dbg_kms(dev, "looking for preferred mode on connector %s %d\n",
> > -				    connector->name, connector->has_tile);
> > +			drm_dbg_kms(dev, "looking for preferred mode on [CONNECTOR:%d:%s] (tiled? %s)\n",
> > +				    connector->base.id, connector->name,
> > +				    str_yes_no(connector->has_tile));
> >  			modes[i] = drm_connector_preferred_mode(connector, width, height);
> >  		}
> >  
> >  		/* No preferred mode marked by the EDID? Are there any modes? */
> >  		if (!modes[i] && !list_empty(&connector->modes)) {
> > -			drm_dbg_kms(dev, "using first mode listed on connector %s\n",
> > -				    connector->name);
> > +			drm_dbg_kms(dev, "using first mode listed on [CONNECTOR:%d:%s]\n",
> > +				    connector->base.id, connector->name);
> >  			modes[i] = drm_connector_first_mode(connector);
> >  		}
> >  
> > @@ -702,8 +706,8 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
> >  			 * is dodgy. Switch to crtc->state->mode, after taking
> >  			 * care of the resulting locking/lifetime issues.
> >  			 */
> > -			drm_dbg_kms(dev, "looking for current mode on connector %s\n",
> > -				    connector->name);
> > +			drm_dbg_kms(dev, "looking for current mode on [CONNECTOR:%d:%s]\n",
> > +				    connector->base.id, connector->name);
> >  			modes[i] = &connector->state->crtc->mode;
> >  		}
> >  		/*
> > @@ -712,14 +716,14 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
> >  		 */
> >  		if (connector->has_tile &&
> >  		    num_tiled_conns < connector->num_h_tile * connector->num_v_tile) {
> > -			drm_dbg_kms(dev, "Falling back to non tiled mode on Connector %d\n",
> > -				    connector->base.id);
> > +			drm_dbg_kms(dev, "Falling back to non tiled mode on [CONNECTOR:%d:%s]\n",
> > +				    connector->base.id, connector->name);
> >  			modes[i] = drm_connector_fallback_non_tiled_mode(connector);
> >  		}
> >  		crtcs[i] = new_crtc;
> >  
> > -		drm_dbg_kms(dev, "connector %s on [CRTC:%d:%s]: %dx%d%s\n",
> > -			    connector->name,
> > +		drm_dbg_kms(dev, "[CONNECTOR:%d:%s] on [CRTC:%d:%s]: %dx%d%s\n",
> > +			    connector->base.id, connector->name,
> >  			    connector->state->crtc->base.id,
> >  			    connector->state->crtc->name,
> >  			    modes[i]->hdisplay, modes[i]->vdisplay,
> > @@ -860,8 +864,9 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width,
> >  			struct drm_mode_set *modeset = drm_client_find_modeset(client, crtc);
> >  			struct drm_connector *connector = connectors[i];
> >  
> > -			drm_dbg_kms(dev, "desired mode %s set on crtc %d (%d,%d)\n",
> > -				    mode->name, crtc->base.id, offset->x, offset->y);
> > +			drm_dbg_kms(dev, "desired mode %s set on [CRTC:%d:%s] (%d,%d)\n",
> > +				    mode->name, crtc->base.id, crtc->name,
> > +				    offset->x, offset->y);
> >  
> >  			if (WARN_ON_ONCE(modeset->num_connectors == DRM_CLIENT_MAX_CLONED_CONNECTORS ||
> >  					 (dev->mode_config.num_crtc > 1 && modeset->num_connectors == 1))) {
> 
> -- 
> Jani Nikula, Intel
diff mbox series

Patch

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index 1751162b7d5c..415d1799337b 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -251,8 +251,10 @@  static void drm_client_connectors_enabled(struct drm_device *dev,
 	for (i = 0; i < connector_count; i++) {
 		connector = connectors[i];
 		enabled[i] = drm_connector_enabled(connector, true);
-		drm_dbg_kms(dev, "connector %d enabled? %s\n", connector->base.id,
-			    connector->display_info.non_desktop ? "non desktop" : str_yes_no(enabled[i]));
+		drm_dbg_kms(dev, "[CONNECTOR:%d:%s] enabled? %s\n",
+			    connector->base.id, connector->name,
+			    connector->display_info.non_desktop ?
+			    "non desktop" : str_yes_no(enabled[i]));
 
 		any_enabled |= enabled[i];
 	}
@@ -368,8 +370,8 @@  static int drm_client_get_tile_offsets(struct drm_device *dev,
 			continue;
 
 		if (!modes[i] && (h_idx || v_idx)) {
-			drm_dbg_kms(dev, "no modes for connector tiled %d %d\n",
-				    i, connector->base.id);
+			drm_dbg_kms(dev, "no modes for tiled [CONNECTOR:%d:%s]\n",
+				    connector->base.id, connector->name);
 			continue;
 		}
 		if (connector->tile_h_loc < h_idx)
@@ -438,14 +440,15 @@  static bool drm_client_target_preferred(struct drm_device *dev,
 			drm_client_get_tile_offsets(dev, connectors, connector_count, modes, offsets, i,
 						    connector->tile_h_loc, connector->tile_v_loc);
 		}
-		drm_dbg_kms(dev, "looking for cmdline mode on connector %d\n",
-			    connector->base.id);
+		drm_dbg_kms(dev, "looking for cmdline mode on [CONNECTOR:%d:%s]\n",
+			    connector->base.id, connector->name);
 
 		/* got for command line mode first */
 		modes[i] = drm_connector_pick_cmdline_mode(connector);
 		if (!modes[i]) {
-			drm_dbg_kms(dev, "looking for preferred mode on connector %d %d\n",
-				    connector->base.id, connector->tile_group ? connector->tile_group->id : 0);
+			drm_dbg_kms(dev, "looking for preferred mode on [CONNECTOR:%d:%s] (tile group: %d)\n",
+				    connector->base.id, connector->name,
+				    connector->tile_group ? connector->tile_group->id : 0);
 			modes[i] = drm_connector_preferred_mode(connector, width, height);
 		}
 		/* No preferred modes, pick one off the list */
@@ -465,8 +468,8 @@  static bool drm_client_target_preferred(struct drm_device *dev,
 			    (connector->tile_h_loc == 0 &&
 			     connector->tile_v_loc == 0 &&
 			     !drm_connector_get_tiled_mode(connector))) {
-				drm_dbg_kms(dev, "Falling back to non tiled mode on Connector %d\n",
-					    connector->base.id);
+				drm_dbg_kms(dev, "Falling back to non tiled mode on [CONNECTOR:%d:%s]\n",
+					    connector->base.id, connector->name);
 				modes[i] = drm_connector_fallback_non_tiled_mode(connector);
 			} else {
 				modes[i] = drm_connector_get_tiled_mode(connector);
@@ -634,15 +637,15 @@  static bool drm_client_firmware_config(struct drm_client_dev *client,
 			num_connectors_detected++;
 
 		if (!enabled[i]) {
-			drm_dbg_kms(dev, "connector %s not enabled, skipping\n",
-				    connector->name);
+			drm_dbg_kms(dev, "[CONNECTOR:%d:%s] not enabled, skipping\n",
+				    connector->base.id, connector->name);
 			conn_configured |= BIT(i);
 			continue;
 		}
 
 		if (connector->force == DRM_FORCE_OFF) {
-			drm_dbg_kms(dev, "connector %s is disabled by user, skipping\n",
-				    connector->name);
+			drm_dbg_kms(dev, "[CONNECTOR:%d:%s] is disabled by user, skipping\n",
+				    connector->base.id, connector->name);
 			enabled[i] = false;
 			continue;
 		}
@@ -652,8 +655,8 @@  static bool drm_client_firmware_config(struct drm_client_dev *client,
 			if (connector->force > DRM_FORCE_OFF)
 				goto bail;
 
-			drm_dbg_kms(dev, "connector %s has no encoder or crtc, skipping\n",
-				    connector->name);
+			drm_dbg_kms(dev, "[CONNECTOR:%d:%s] has no encoder or crtc, skipping\n",
+				    connector->base.id, connector->name);
 			enabled[i] = false;
 			conn_configured |= BIT(i);
 			continue;
@@ -675,23 +678,24 @@  static bool drm_client_firmware_config(struct drm_client_dev *client,
 			}
 		}
 
-		drm_dbg_kms(dev, "looking for cmdline mode on connector %s\n",
-			    connector->name);
+		drm_dbg_kms(dev, "looking for cmdline mode on [CONNECTOR:%d:%s]\n",
+			    connector->base.id, connector->name);
 
 		/* go for command line mode first */
 		modes[i] = drm_connector_pick_cmdline_mode(connector);
 
 		/* try for preferred next */
 		if (!modes[i]) {
-			drm_dbg_kms(dev, "looking for preferred mode on connector %s %d\n",
-				    connector->name, connector->has_tile);
+			drm_dbg_kms(dev, "looking for preferred mode on [CONNECTOR:%d:%s] (tiled? %s)\n",
+				    connector->base.id, connector->name,
+				    str_yes_no(connector->has_tile));
 			modes[i] = drm_connector_preferred_mode(connector, width, height);
 		}
 
 		/* No preferred mode marked by the EDID? Are there any modes? */
 		if (!modes[i] && !list_empty(&connector->modes)) {
-			drm_dbg_kms(dev, "using first mode listed on connector %s\n",
-				    connector->name);
+			drm_dbg_kms(dev, "using first mode listed on [CONNECTOR:%d:%s]\n",
+				    connector->base.id, connector->name);
 			modes[i] = drm_connector_first_mode(connector);
 		}
 
@@ -702,8 +706,8 @@  static bool drm_client_firmware_config(struct drm_client_dev *client,
 			 * is dodgy. Switch to crtc->state->mode, after taking
 			 * care of the resulting locking/lifetime issues.
 			 */
-			drm_dbg_kms(dev, "looking for current mode on connector %s\n",
-				    connector->name);
+			drm_dbg_kms(dev, "looking for current mode on [CONNECTOR:%d:%s]\n",
+				    connector->base.id, connector->name);
 			modes[i] = &connector->state->crtc->mode;
 		}
 		/*
@@ -712,14 +716,14 @@  static bool drm_client_firmware_config(struct drm_client_dev *client,
 		 */
 		if (connector->has_tile &&
 		    num_tiled_conns < connector->num_h_tile * connector->num_v_tile) {
-			drm_dbg_kms(dev, "Falling back to non tiled mode on Connector %d\n",
-				    connector->base.id);
+			drm_dbg_kms(dev, "Falling back to non tiled mode on [CONNECTOR:%d:%s]\n",
+				    connector->base.id, connector->name);
 			modes[i] = drm_connector_fallback_non_tiled_mode(connector);
 		}
 		crtcs[i] = new_crtc;
 
-		drm_dbg_kms(dev, "connector %s on [CRTC:%d:%s]: %dx%d%s\n",
-			    connector->name,
+		drm_dbg_kms(dev, "[CONNECTOR:%d:%s] on [CRTC:%d:%s]: %dx%d%s\n",
+			    connector->base.id, connector->name,
 			    connector->state->crtc->base.id,
 			    connector->state->crtc->name,
 			    modes[i]->hdisplay, modes[i]->vdisplay,
@@ -860,8 +864,9 @@  int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width,
 			struct drm_mode_set *modeset = drm_client_find_modeset(client, crtc);
 			struct drm_connector *connector = connectors[i];
 
-			drm_dbg_kms(dev, "desired mode %s set on crtc %d (%d,%d)\n",
-				    mode->name, crtc->base.id, offset->x, offset->y);
+			drm_dbg_kms(dev, "desired mode %s set on [CRTC:%d:%s] (%d,%d)\n",
+				    mode->name, crtc->base.id, crtc->name,
+				    offset->x, offset->y);
 
 			if (WARN_ON_ONCE(modeset->num_connectors == DRM_CLIENT_MAX_CLONED_CONNECTORS ||
 					 (dev->mode_config.num_crtc > 1 && modeset->num_connectors == 1))) {