| Message ID | 20240409120211.321153-3-angelogioacchino.delregno@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/mediatek: Add support for OF graphs | expand |
On Tue, Apr 09, 2024 at 02:02:10PM +0200, AngeloGioacchino Del Regno wrote: > Document OF graph on MMSYS/VDOSYS: this supports up to three DDP paths > per HW instance (so potentially up to six displays for multi-vdo SoCs). > > The MMSYS or VDOSYS is always the first component in the DDP pipeline, > so it only supports an output port with multiple endpoints - where each > endpoint defines the starting point for one of the (currently three) > possible hardware paths. > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > --- > .../bindings/arm/mediatek/mediatek,mmsys.yaml | 23 +++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml > index b3c6888c1457..4e9acd966aa5 100644 > --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml > @@ -93,6 +93,29 @@ properties: > '#reset-cells': > const: 1 > > + port: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Output port node. This port connects the MMSYS/VDOSYS output to > + the first component of one display pipeline, for example one of > + the available OVL or RDMA blocks. > + Some MediaTek SoCs support up to three display outputs per MMSYS. I'm have a hard time understanding this, but is it 3 outputs simultaneously or connect mmsys to 1 of 3. Generally it's multiple ports for the former and endpoints for the latter. > + properties: > + endpoint@0: > + $ref: /schemas/graph.yaml#/properties/endpoint > + description: Output to the primary display pipeline > + > + endpoint@1: > + $ref: /schemas/graph.yaml#/properties/endpoint > + description: Output to the secondary display pipeline > + > + endpoint@2: > + $ref: /schemas/graph.yaml#/properties/endpoint > + description: Output to the tertiary display pipeline > + > + required: > + - endpoint@0 > + > required: > - compatible > - reg > -- > 2.44.0 >
Il 10/04/24 21:15, Rob Herring ha scritto: > On Tue, Apr 09, 2024 at 02:02:10PM +0200, AngeloGioacchino Del Regno wrote: >> Document OF graph on MMSYS/VDOSYS: this supports up to three DDP paths >> per HW instance (so potentially up to six displays for multi-vdo SoCs). >> >> The MMSYS or VDOSYS is always the first component in the DDP pipeline, >> so it only supports an output port with multiple endpoints - where each >> endpoint defines the starting point for one of the (currently three) >> possible hardware paths. >> >> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> >> --- >> .../bindings/arm/mediatek/mediatek,mmsys.yaml | 23 +++++++++++++++++++ >> 1 file changed, 23 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml >> index b3c6888c1457..4e9acd966aa5 100644 >> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml >> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml >> @@ -93,6 +93,29 @@ properties: >> '#reset-cells': >> const: 1 >> >> + port: >> + $ref: /schemas/graph.yaml#/properties/port >> + description: >> + Output port node. This port connects the MMSYS/VDOSYS output to >> + the first component of one display pipeline, for example one of >> + the available OVL or RDMA blocks. >> + Some MediaTek SoCs support up to three display outputs per MMSYS. > > I'm have a hard time understanding this, but is it 3 outputs > simultaneously or connect mmsys to 1 of 3. Generally it's multiple ports > for the former and endpoints for the latter. > Yes I feel you, MediaTek SoCs are a bit strange, but I do have a reason to use one port and multiple endpoints, instead of multiple ports and one endpoint. On MediaTek SoCs, there are multiple ports: those multiple ports are represented by multiple MMSYS or multiple VDOSYS (depending on the SoC), which do then have multiple endpoints. However, the multiple ports, at least for now, are represented by multiple MMSYS and/or multiple VDOSYS nodes instead of one MM/VDO node with multiple iostart for the multiple blocks in `reg`. The multiple iostart "thing" was the initial design by MediaTek, but there was no way to get them really connected the right way unless adding an iostart restriction in the driver itself (so that the mmsys driver would check an iostart to probe the mediatek-drm components for the right IP number), so, after quite many reviews and many series versions, they had to resort to use multiple nodes for each VDO. I think that, after this series, we could also clean that mess up (sorry for the strong words) and make it right - assigning the MMIO for all VDOSYS blocks to one node, and adding the multiple ports - however, that will require a bit of work that is simply too much for this series alone. Summarizing, so that you don't have to carefully proof-read all this wall of text: - MediaTek SoCs have got multiple `port` for MMSYS and VDOSYS - Currently the driver implementation doesn't allow that - MediaTek had to work around no OF graph support! - Multiple ports are the multiple MMSYS/VDOSYS - One MMSYS / One VDOSYS have multiple `endpoints` That's how the HW is. Hope that's clear now? Cheers, Angelo >> + properties: >> + endpoint@0: >> + $ref: /schemas/graph.yaml#/properties/endpoint >> + description: Output to the primary display pipeline >> + >> + endpoint@1: >> + $ref: /schemas/graph.yaml#/properties/endpoint >> + description: Output to the secondary display pipeline >> + >> + endpoint@2: >> + $ref: /schemas/graph.yaml#/properties/endpoint >> + description: Output to the tertiary display pipeline >> + >> + required: >> + - endpoint@0 >> + >> required: >> - compatible >> - reg >> -- >> 2.44.0 >>
Hi, Angelo: On Tue, 2024-04-09 at 14:02 +0200, AngeloGioacchino Del Regno wrote: > Document OF graph on MMSYS/VDOSYS: this supports up to three DDP > paths > per HW instance (so potentially up to six displays for multi-vdo > SoCs). > > The MMSYS or VDOSYS is always the first component in the DDP > pipeline, > so it only supports an output port with multiple endpoints - where > each > endpoint defines the starting point for one of the (currently three) > possible hardware paths. > > Signed-off-by: AngeloGioacchino Del Regno < > angelogioacchino.delregno@collabora.com> > --- > .../bindings/arm/mediatek/mediatek,mmsys.yaml | 23 > +++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git > a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml > b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml > index b3c6888c1457..4e9acd966aa5 100644 > --- > a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml > +++ > b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml > @@ -93,6 +93,29 @@ properties: > '#reset-cells': > const: 1 > > + port: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Output port node. This port connects the MMSYS/VDOSYS output > to > + the first component of one display pipeline, for example one > of > + the available OVL or RDMA blocks. > + Some MediaTek SoCs support up to three display outputs per > MMSYS. > + properties: > + endpoint@0: > + $ref: /schemas/graph.yaml#/properties/endpoint > + description: Output to the primary display pipeline > + > + endpoint@1: > + $ref: /schemas/graph.yaml#/properties/endpoint > + description: Output to the secondary display pipeline > + > + endpoint@2: > + $ref: /schemas/graph.yaml#/properties/endpoint > + description: Output to the tertiary display pipeline > + > + required: > + - endpoint@0 > + mmsys/vdosys does not output data to the first component of display pipeline, so this connection looks 'virtual'. Shall we add something virtual in device tree? You add this in order to decide which pipeline is 1st, 2nd, 3rd, but for device it don't care which one is first. In computer, software could change which display is the primary display. I'm not sure it's good to decide display order in device tree? Regards, CK > required: > - compatible > - reg
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml index b3c6888c1457..4e9acd966aa5 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml @@ -93,6 +93,29 @@ properties: '#reset-cells': const: 1 + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port node. This port connects the MMSYS/VDOSYS output to + the first component of one display pipeline, for example one of + the available OVL or RDMA blocks. + Some MediaTek SoCs support up to three display outputs per MMSYS. + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Output to the primary display pipeline + + endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Output to the secondary display pipeline + + endpoint@2: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Output to the tertiary display pipeline + + required: + - endpoint@0 + required: - compatible - reg
Document OF graph on MMSYS/VDOSYS: this supports up to three DDP paths per HW instance (so potentially up to six displays for multi-vdo SoCs). The MMSYS or VDOSYS is always the first component in the DDP pipeline, so it only supports an output port with multiple endpoints - where each endpoint defines the starting point for one of the (currently three) possible hardware paths. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- .../bindings/arm/mediatek/mediatek,mmsys.yaml | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+)