| Message ID | 20240417-raydium-rm69380-driver-v4-2-e9c2337d0049@mainlining.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add driver for Raydium RM69380-based DSI panels | expand |
On 4/17/2024 9:29 AM, David Wronek wrote: > Add support for the 2560x1600@90Hz OLED panel by EDO bundled with a > Raydium RM69380 controller, as found on the Lenovo Xiaoxin Pad Pro 2021. > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Signed-off-by: David Wronek <david@mainlining.org> Hi David, Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Thanks, Jessica Zhang > --- > drivers/gpu/drm/panel/Kconfig | 12 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-raydium-rm69380.c | 344 ++++++++++++++++++++++++++ > 3 files changed, 357 insertions(+) > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 154f5bf82980..e2a66c21349f 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -542,6 +542,18 @@ config DRM_PANEL_RAYDIUM_RM692E5 > Say Y here if you want to enable support for Raydium RM692E5-based > display panels, such as the one found in the Fairphone 5 smartphone. > > +config DRM_PANEL_RAYDIUM_RM69380 > + tristate "Raydium RM69380-based DSI panel" > + depends on OF && GPIOLIB > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y here if you want to enable support for Raydium RM69380-based > + display panels. > + > + This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021 > + in combination with an EDO OLED panel. > + > config DRM_PANEL_RONBO_RB070D30 > tristate "Ronbo Electronics RB070D30 panel" > depends on OF > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index 24a02655d726..e2a2807d4ef0 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -55,6 +55,7 @@ obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen > obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o > obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o > obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM692E5) += panel-raydium-rm692e5.o > +obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM69380) += panel-raydium-rm69380.o > obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20) += panel-samsung-atna33xc20.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_DB7430) += panel-samsung-db7430.o > diff --git a/drivers/gpu/drm/panel/panel-raydium-rm69380.c b/drivers/gpu/drm/panel/panel-raydium-rm69380.c > new file mode 100644 > index 000000000000..4dca6802faef > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-raydium-rm69380.c > @@ -0,0 +1,344 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree. > + * Copyright (c) 2024 David Wronek <david@mainlining.org> > + */ > + > +#include <linux/backlight.h> > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/of_graph.h> > +#include <linux/regulator/consumer.h> > + > +#include <video/mipi_display.h> > + > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_modes.h> > +#include <drm/drm_panel.h> > +#include <drm/drm_probe_helper.h> > + > +struct rm69380_panel { > + struct drm_panel panel; > + struct mipi_dsi_device *dsi[2]; > + struct regulator_bulk_data supplies[2]; > + struct gpio_desc *reset_gpio; > +}; > + > +static inline > +struct rm69380_panel *to_rm69380_panel(struct drm_panel *panel) > +{ > + return container_of(panel, struct rm69380_panel, panel); > +} > + > +static void rm69380_reset(struct rm69380_panel *ctx) > +{ > + gpiod_set_value_cansleep(ctx->reset_gpio, 0); > + usleep_range(15000, 16000); > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + usleep_range(10000, 11000); > + gpiod_set_value_cansleep(ctx->reset_gpio, 0); > + msleep(30); > +} > + > +static int rm69380_on(struct rm69380_panel *ctx) > +{ > + struct mipi_dsi_device *dsi = ctx->dsi[0]; > + struct device *dev = &dsi->dev; > + int ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + if (ctx->dsi[1]) > + ctx->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM; > + > + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd4); > + mipi_dsi_dcs_write_seq(dsi, 0x00, 0x80); > + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd0); > + mipi_dsi_dcs_write_seq(dsi, 0x48, 0x00); > + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x26); > + mipi_dsi_dcs_write_seq(dsi, 0x75, 0x3f); > + mipi_dsi_dcs_write_seq(dsi, 0x1d, 0x1a); > + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x00); > + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x28); > + mipi_dsi_dcs_write_seq(dsi, 0xc2, 0x08); > + > + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); > + if (ret < 0) { > + dev_err(dev, "Failed to set tear on: %d\n", ret); > + return ret; > + } > + > + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to exit sleep mode: %d\n", ret); > + return ret; > + } > + msleep(20); > + > + ret = mipi_dsi_dcs_set_display_on(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to set display on: %d\n", ret); > + return ret; > + } > + msleep(36); > + > + return 0; > +} > + > +static int rm69380_off(struct rm69380_panel *ctx) > +{ > + struct mipi_dsi_device *dsi = ctx->dsi[0]; > + struct device *dev = &dsi->dev; > + int ret; > + > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + if (ctx->dsi[1]) > + ctx->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + ret = mipi_dsi_dcs_set_display_off(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to set display off: %d\n", ret); > + return ret; > + } > + msleep(35); > + > + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to enter sleep mode: %d\n", ret); > + return ret; > + } > + msleep(20); > + > + return 0; > +} > + > +static int rm69380_prepare(struct drm_panel *panel) > +{ > + struct rm69380_panel *ctx = to_rm69380_panel(panel); > + struct device *dev = &ctx->dsi[0]->dev; > + int ret; > + > + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > + if (ret < 0) { > + dev_err(dev, "Failed to enable regulators: %d\n", ret); > + return ret; > + } > + > + rm69380_reset(ctx); > + > + ret = rm69380_on(ctx); > + if (ret < 0) { > + dev_err(dev, "Failed to initialize panel: %d\n", ret); > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > + return ret; > + } > + > + return 0; > +} > + > +static int rm69380_unprepare(struct drm_panel *panel) > +{ > + struct rm69380_panel *ctx = to_rm69380_panel(panel); > + struct device *dev = &ctx->dsi[0]->dev; > + int ret; > + > + ret = rm69380_off(ctx); > + if (ret < 0) > + dev_err(dev, "Failed to un-initialize panel: %d\n", ret); > + > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > + > + return 0; > +} > + > +static const struct drm_display_mode rm69380_mode = { > + .clock = (2560 + 32 + 12 + 38) * (1600 + 20 + 4 + 8) * 90 / 1000, > + .hdisplay = 2560, > + .hsync_start = 2560 + 32, > + .hsync_end = 2560 + 32 + 12, > + .htotal = 2560 + 32 + 12 + 38, > + .vdisplay = 1600, > + .vsync_start = 1600 + 20, > + .vsync_end = 1600 + 20 + 4, > + .vtotal = 1600 + 20 + 4 + 8, > + .width_mm = 248, > + .height_mm = 155, > + .type = DRM_MODE_TYPE_DRIVER, > +}; > + > +static int rm69380_get_modes(struct drm_panel *panel, > + struct drm_connector *connector) > +{ > + return drm_connector_helper_get_modes_fixed(connector, &rm69380_mode); > +} > + > +static const struct drm_panel_funcs rm69380_panel_funcs = { > + .prepare = rm69380_prepare, > + .unprepare = rm69380_unprepare, > + .get_modes = rm69380_get_modes, > +}; > + > +static int rm69380_bl_update_status(struct backlight_device *bl) > +{ > + struct mipi_dsi_device *dsi = bl_get_data(bl); > + u16 brightness = backlight_get_brightness(bl); > + int ret; > + > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness); > + if (ret < 0) > + return ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + return 0; > +} > + > +static int rm69380_bl_get_brightness(struct backlight_device *bl) > +{ > + struct mipi_dsi_device *dsi = bl_get_data(bl); > + u16 brightness; > + int ret; > + > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness); > + if (ret < 0) > + return ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + return brightness; > +} > + > +static const struct backlight_ops rm69380_bl_ops = { > + .update_status = rm69380_bl_update_status, > + .get_brightness = rm69380_bl_get_brightness, > +}; > + > +static struct backlight_device * > +rm69380_create_backlight(struct mipi_dsi_device *dsi) > +{ > + struct device *dev = &dsi->dev; > + const struct backlight_properties props = { > + .type = BACKLIGHT_RAW, > + .brightness = 511, > + .max_brightness = 2047, > + }; > + > + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, > + &rm69380_bl_ops, &props); > +} > + > +static int rm69380_probe(struct mipi_dsi_device *dsi) > +{ > + struct mipi_dsi_host *dsi_sec_host; > + struct rm69380_panel *ctx; > + struct device *dev = &dsi->dev; > + struct device_node *dsi_sec; > + int ret, i; > + > + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); > + if (!ctx) > + return -ENOMEM; > + > + ctx->supplies[0].supply = "vddio"; > + ctx->supplies[1].supply = "avdd"; > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), > + ctx->supplies); > + if (ret < 0) > + return dev_err_probe(dev, ret, "Failed to get regulators\n"); > + > + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(ctx->reset_gpio)) > + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), > + "Failed to get reset-gpios\n"); > + > + dsi_sec = of_graph_get_remote_node(dsi->dev.of_node, 1, -1); > + > + if (dsi_sec) { > + const struct mipi_dsi_device_info info = { "RM69380 DSI1", 0, > + dsi_sec }; > + > + dsi_sec_host = of_find_mipi_dsi_host_by_node(dsi_sec); > + of_node_put(dsi_sec); > + if (!dsi_sec_host) > + return dev_err_probe(dev, -EPROBE_DEFER, > + "Cannot get secondary DSI host\n"); > + > + ctx->dsi[1] = > + devm_mipi_dsi_device_register_full(dev, dsi_sec_host, &info); > + if (IS_ERR(ctx->dsi[1])) > + return dev_err_probe(dev, PTR_ERR(ctx->dsi[1]), > + "Cannot get secondary DSI node\n"); > + > + mipi_dsi_set_drvdata(ctx->dsi[1], ctx); > + } > + > + ctx->dsi[0] = dsi; > + mipi_dsi_set_drvdata(dsi, ctx); > + > + drm_panel_init(&ctx->panel, dev, &rm69380_panel_funcs, > + DRM_MODE_CONNECTOR_DSI); > + ctx->panel.prepare_prev_first = true; > + > + ctx->panel.backlight = rm69380_create_backlight(dsi); > + if (IS_ERR(ctx->panel.backlight)) > + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight), > + "Failed to create backlight\n"); > + > + drm_panel_add(&ctx->panel); > + > + for (i = 0; i < ARRAY_SIZE(ctx->dsi); i++) { > + if (!ctx->dsi[i]) > + continue; > + > + dev_dbg(&ctx->dsi[i]->dev, "Binding DSI %d\n", i); > + > + ctx->dsi[i]->lanes = 4; > + ctx->dsi[i]->format = MIPI_DSI_FMT_RGB888; > + ctx->dsi[i]->mode_flags = MIPI_DSI_MODE_VIDEO_BURST | > + MIPI_DSI_CLOCK_NON_CONTINUOUS; > + > + ret = devm_mipi_dsi_attach(dev, ctx->dsi[i]); > + if (ret < 0) { > + drm_panel_remove(&ctx->panel); > + return dev_err_probe(dev, ret, > + "Failed to attach to DSI%d\n", i); > + } > + } > + > + return 0; > +} > + > +static void rm69380_remove(struct mipi_dsi_device *dsi) > +{ > + struct rm69380_panel *ctx = mipi_dsi_get_drvdata(dsi); > + > + drm_panel_remove(&ctx->panel); > +} > + > +static const struct of_device_id rm69380_of_match[] = { > + { .compatible = "lenovo,j716f-edo-rm69380" }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, rm69380_of_match); > + > +static struct mipi_dsi_driver rm69380_panel_driver = { > + .probe = rm69380_probe, > + .remove = rm69380_remove, > + .driver = { > + .name = "panel-raydium-rm69380", > + .of_match_table = rm69380_of_match, > + }, > +}; > +module_mipi_dsi_driver(rm69380_panel_driver); > + > +MODULE_AUTHOR("David Wronek <david@mainlining.org"); > +MODULE_DESCRIPTION("DRM driver for Raydium RM69380-equipped DSI panels"); > +MODULE_LICENSE("GPL"); > > -- > 2.44.0 >
On 2024-04-17 18:29:34, David Wronek wrote: > Add support for the 2560x1600@90Hz OLED panel by EDO bundled with a > Raydium RM69380 controller, as found on the Lenovo Xiaoxin Pad Pro 2021. > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Signed-off-by: David Wronek <david@mainlining.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> > --- > drivers/gpu/drm/panel/Kconfig | 12 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-raydium-rm69380.c | 344 ++++++++++++++++++++++++++ > 3 files changed, 357 insertions(+) > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 154f5bf82980..e2a66c21349f 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -542,6 +542,18 @@ config DRM_PANEL_RAYDIUM_RM692E5 > Say Y here if you want to enable support for Raydium RM692E5-based > display panels, such as the one found in the Fairphone 5 smartphone. > > +config DRM_PANEL_RAYDIUM_RM69380 > + tristate "Raydium RM69380-based DSI panel" > + depends on OF && GPIOLIB > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y here if you want to enable support for Raydium RM69380-based > + display panels. > + > + This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021 > + in combination with an EDO OLED panel. > + > config DRM_PANEL_RONBO_RB070D30 > tristate "Ronbo Electronics RB070D30 panel" > depends on OF > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index 24a02655d726..e2a2807d4ef0 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -55,6 +55,7 @@ obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen > obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o > obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o > obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM692E5) += panel-raydium-rm692e5.o > +obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM69380) += panel-raydium-rm69380.o > obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20) += panel-samsung-atna33xc20.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_DB7430) += panel-samsung-db7430.o > diff --git a/drivers/gpu/drm/panel/panel-raydium-rm69380.c b/drivers/gpu/drm/panel/panel-raydium-rm69380.c > new file mode 100644 > index 000000000000..4dca6802faef > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-raydium-rm69380.c > @@ -0,0 +1,344 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree. > + * Copyright (c) 2024 David Wronek <david@mainlining.org> > + */ > + > +#include <linux/backlight.h> > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/of_graph.h> > +#include <linux/regulator/consumer.h> > + > +#include <video/mipi_display.h> > + > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_modes.h> > +#include <drm/drm_panel.h> > +#include <drm/drm_probe_helper.h> > + > +struct rm69380_panel { > + struct drm_panel panel; > + struct mipi_dsi_device *dsi[2]; > + struct regulator_bulk_data supplies[2]; > + struct gpio_desc *reset_gpio; > +}; > + > +static inline > +struct rm69380_panel *to_rm69380_panel(struct drm_panel *panel) > +{ > + return container_of(panel, struct rm69380_panel, panel); > +} > + > +static void rm69380_reset(struct rm69380_panel *ctx) > +{ > + gpiod_set_value_cansleep(ctx->reset_gpio, 0); > + usleep_range(15000, 16000); > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + usleep_range(10000, 11000); > + gpiod_set_value_cansleep(ctx->reset_gpio, 0); > + msleep(30); > +} > + > +static int rm69380_on(struct rm69380_panel *ctx) > +{ > + struct mipi_dsi_device *dsi = ctx->dsi[0]; > + struct device *dev = &dsi->dev; > + int ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + if (ctx->dsi[1]) > + ctx->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM; > + > + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd4); > + mipi_dsi_dcs_write_seq(dsi, 0x00, 0x80); > + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd0); > + mipi_dsi_dcs_write_seq(dsi, 0x48, 0x00); > + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x26); > + mipi_dsi_dcs_write_seq(dsi, 0x75, 0x3f); > + mipi_dsi_dcs_write_seq(dsi, 0x1d, 0x1a); > + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x00); > + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x28); > + mipi_dsi_dcs_write_seq(dsi, 0xc2, 0x08); > + > + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); > + if (ret < 0) { > + dev_err(dev, "Failed to set tear on: %d\n", ret); > + return ret; > + } > + > + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to exit sleep mode: %d\n", ret); > + return ret; > + } > + msleep(20); > + > + ret = mipi_dsi_dcs_set_display_on(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to set display on: %d\n", ret); > + return ret; > + } > + msleep(36); > + > + return 0; > +} > + > +static int rm69380_off(struct rm69380_panel *ctx) > +{ > + struct mipi_dsi_device *dsi = ctx->dsi[0]; > + struct device *dev = &dsi->dev; > + int ret; > + > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + if (ctx->dsi[1]) > + ctx->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + ret = mipi_dsi_dcs_set_display_off(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to set display off: %d\n", ret); > + return ret; > + } > + msleep(35); > + > + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to enter sleep mode: %d\n", ret); > + return ret; > + } > + msleep(20); > + > + return 0; > +} > + > +static int rm69380_prepare(struct drm_panel *panel) > +{ > + struct rm69380_panel *ctx = to_rm69380_panel(panel); > + struct device *dev = &ctx->dsi[0]->dev; > + int ret; > + > + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > + if (ret < 0) { > + dev_err(dev, "Failed to enable regulators: %d\n", ret); > + return ret; > + } > + > + rm69380_reset(ctx); > + > + ret = rm69380_on(ctx); > + if (ret < 0) { > + dev_err(dev, "Failed to initialize panel: %d\n", ret); > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > + return ret; > + } > + > + return 0; > +} > + > +static int rm69380_unprepare(struct drm_panel *panel) > +{ > + struct rm69380_panel *ctx = to_rm69380_panel(panel); > + struct device *dev = &ctx->dsi[0]->dev; > + int ret; > + > + ret = rm69380_off(ctx); > + if (ret < 0) > + dev_err(dev, "Failed to un-initialize panel: %d\n", ret); > + > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > + > + return 0; > +} > + > +static const struct drm_display_mode rm69380_mode = { > + .clock = (2560 + 32 + 12 + 38) * (1600 + 20 + 4 + 8) * 90 / 1000, > + .hdisplay = 2560, > + .hsync_start = 2560 + 32, > + .hsync_end = 2560 + 32 + 12, > + .htotal = 2560 + 32 + 12 + 38, > + .vdisplay = 1600, > + .vsync_start = 1600 + 20, > + .vsync_end = 1600 + 20 + 4, > + .vtotal = 1600 + 20 + 4 + 8, > + .width_mm = 248, > + .height_mm = 155, > + .type = DRM_MODE_TYPE_DRIVER, > +}; > + > +static int rm69380_get_modes(struct drm_panel *panel, > + struct drm_connector *connector) > +{ > + return drm_connector_helper_get_modes_fixed(connector, &rm69380_mode); > +} > + > +static const struct drm_panel_funcs rm69380_panel_funcs = { > + .prepare = rm69380_prepare, > + .unprepare = rm69380_unprepare, > + .get_modes = rm69380_get_modes, > +}; > + > +static int rm69380_bl_update_status(struct backlight_device *bl) > +{ > + struct mipi_dsi_device *dsi = bl_get_data(bl); > + u16 brightness = backlight_get_brightness(bl); > + int ret; > + > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness); > + if (ret < 0) > + return ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + return 0; > +} > + > +static int rm69380_bl_get_brightness(struct backlight_device *bl) > +{ > + struct mipi_dsi_device *dsi = bl_get_data(bl); > + u16 brightness; > + int ret; > + > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness); > + if (ret < 0) > + return ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + return brightness; > +} > + > +static const struct backlight_ops rm69380_bl_ops = { > + .update_status = rm69380_bl_update_status, > + .get_brightness = rm69380_bl_get_brightness, > +}; > + > +static struct backlight_device * > +rm69380_create_backlight(struct mipi_dsi_device *dsi) > +{ > + struct device *dev = &dsi->dev; > + const struct backlight_properties props = { > + .type = BACKLIGHT_RAW, > + .brightness = 511, > + .max_brightness = 2047, > + }; > + > + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, > + &rm69380_bl_ops, &props); > +} > + > +static int rm69380_probe(struct mipi_dsi_device *dsi) > +{ > + struct mipi_dsi_host *dsi_sec_host; > + struct rm69380_panel *ctx; > + struct device *dev = &dsi->dev; > + struct device_node *dsi_sec; > + int ret, i; > + > + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); > + if (!ctx) > + return -ENOMEM; > + > + ctx->supplies[0].supply = "vddio"; > + ctx->supplies[1].supply = "avdd"; > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), > + ctx->supplies); > + if (ret < 0) > + return dev_err_probe(dev, ret, "Failed to get regulators\n"); > + > + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(ctx->reset_gpio)) > + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), > + "Failed to get reset-gpios\n"); > + > + dsi_sec = of_graph_get_remote_node(dsi->dev.of_node, 1, -1); > + > + if (dsi_sec) { > + const struct mipi_dsi_device_info info = { "RM69380 DSI1", 0, > + dsi_sec }; > + > + dsi_sec_host = of_find_mipi_dsi_host_by_node(dsi_sec); > + of_node_put(dsi_sec); > + if (!dsi_sec_host) > + return dev_err_probe(dev, -EPROBE_DEFER, > + "Cannot get secondary DSI host\n"); > + > + ctx->dsi[1] = > + devm_mipi_dsi_device_register_full(dev, dsi_sec_host, &info); > + if (IS_ERR(ctx->dsi[1])) > + return dev_err_probe(dev, PTR_ERR(ctx->dsi[1]), > + "Cannot get secondary DSI node\n"); > + > + mipi_dsi_set_drvdata(ctx->dsi[1], ctx); > + } > + > + ctx->dsi[0] = dsi; > + mipi_dsi_set_drvdata(dsi, ctx); > + > + drm_panel_init(&ctx->panel, dev, &rm69380_panel_funcs, > + DRM_MODE_CONNECTOR_DSI); > + ctx->panel.prepare_prev_first = true; > + > + ctx->panel.backlight = rm69380_create_backlight(dsi); > + if (IS_ERR(ctx->panel.backlight)) > + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight), > + "Failed to create backlight\n"); > + > + drm_panel_add(&ctx->panel); > + > + for (i = 0; i < ARRAY_SIZE(ctx->dsi); i++) { > + if (!ctx->dsi[i]) > + continue; > + > + dev_dbg(&ctx->dsi[i]->dev, "Binding DSI %d\n", i); > + > + ctx->dsi[i]->lanes = 4; > + ctx->dsi[i]->format = MIPI_DSI_FMT_RGB888; > + ctx->dsi[i]->mode_flags = MIPI_DSI_MODE_VIDEO_BURST | > + MIPI_DSI_CLOCK_NON_CONTINUOUS; > + > + ret = devm_mipi_dsi_attach(dev, ctx->dsi[i]); > + if (ret < 0) { > + drm_panel_remove(&ctx->panel); > + return dev_err_probe(dev, ret, > + "Failed to attach to DSI%d\n", i); > + } > + } > + > + return 0; > +} > + > +static void rm69380_remove(struct mipi_dsi_device *dsi) > +{ > + struct rm69380_panel *ctx = mipi_dsi_get_drvdata(dsi); > + > + drm_panel_remove(&ctx->panel); > +} > + > +static const struct of_device_id rm69380_of_match[] = { > + { .compatible = "lenovo,j716f-edo-rm69380" }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, rm69380_of_match); > + > +static struct mipi_dsi_driver rm69380_panel_driver = { > + .probe = rm69380_probe, > + .remove = rm69380_remove, > + .driver = { > + .name = "panel-raydium-rm69380", > + .of_match_table = rm69380_of_match, > + }, > +}; > +module_mipi_dsi_driver(rm69380_panel_driver); > + > +MODULE_AUTHOR("David Wronek <david@mainlining.org"); > +MODULE_DESCRIPTION("DRM driver for Raydium RM69380-equipped DSI panels"); > +MODULE_LICENSE("GPL"); > > -- > 2.44.0 >
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 154f5bf82980..e2a66c21349f 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -542,6 +542,18 @@ config DRM_PANEL_RAYDIUM_RM692E5 Say Y here if you want to enable support for Raydium RM692E5-based display panels, such as the one found in the Fairphone 5 smartphone. +config DRM_PANEL_RAYDIUM_RM69380 + tristate "Raydium RM69380-based DSI panel" + depends on OF && GPIOLIB + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for Raydium RM69380-based + display panels. + + This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021 + in combination with an EDO OLED panel. + config DRM_PANEL_RONBO_RB070D30 tristate "Ronbo Electronics RB070D30 panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 24a02655d726..e2a2807d4ef0 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM692E5) += panel-raydium-rm692e5.o +obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM69380) += panel-raydium-rm69380.o obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20) += panel-samsung-atna33xc20.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_DB7430) += panel-samsung-db7430.o diff --git a/drivers/gpu/drm/panel/panel-raydium-rm69380.c b/drivers/gpu/drm/panel/panel-raydium-rm69380.c new file mode 100644 index 000000000000..4dca6802faef --- /dev/null +++ b/drivers/gpu/drm/panel/panel-raydium-rm69380.c @@ -0,0 +1,344 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree. + * Copyright (c) 2024 David Wronek <david@mainlining.org> + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_graph.h> +#include <linux/regulator/consumer.h> + +#include <video/mipi_display.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> +#include <drm/drm_probe_helper.h> + +struct rm69380_panel { + struct drm_panel panel; + struct mipi_dsi_device *dsi[2]; + struct regulator_bulk_data supplies[2]; + struct gpio_desc *reset_gpio; +}; + +static inline +struct rm69380_panel *to_rm69380_panel(struct drm_panel *panel) +{ + return container_of(panel, struct rm69380_panel, panel); +} + +static void rm69380_reset(struct rm69380_panel *ctx) +{ + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + usleep_range(15000, 16000); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + usleep_range(10000, 11000); + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + msleep(30); +} + +static int rm69380_on(struct rm69380_panel *ctx) +{ + struct mipi_dsi_device *dsi = ctx->dsi[0]; + struct device *dev = &dsi->dev; + int ret; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + if (ctx->dsi[1]) + ctx->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM; + + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd4); + mipi_dsi_dcs_write_seq(dsi, 0x00, 0x80); + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd0); + mipi_dsi_dcs_write_seq(dsi, 0x48, 0x00); + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x26); + mipi_dsi_dcs_write_seq(dsi, 0x75, 0x3f); + mipi_dsi_dcs_write_seq(dsi, 0x1d, 0x1a); + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x00); + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x28); + mipi_dsi_dcs_write_seq(dsi, 0xc2, 0x08); + + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); + if (ret < 0) { + dev_err(dev, "Failed to set tear on: %d\n", ret); + return ret; + } + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to exit sleep mode: %d\n", ret); + return ret; + } + msleep(20); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display on: %d\n", ret); + return ret; + } + msleep(36); + + return 0; +} + +static int rm69380_off(struct rm69380_panel *ctx) +{ + struct mipi_dsi_device *dsi = ctx->dsi[0]; + struct device *dev = &dsi->dev; + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + if (ctx->dsi[1]) + ctx->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display off: %d\n", ret); + return ret; + } + msleep(35); + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to enter sleep mode: %d\n", ret); + return ret; + } + msleep(20); + + return 0; +} + +static int rm69380_prepare(struct drm_panel *panel) +{ + struct rm69380_panel *ctx = to_rm69380_panel(panel); + struct device *dev = &ctx->dsi[0]->dev; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + if (ret < 0) { + dev_err(dev, "Failed to enable regulators: %d\n", ret); + return ret; + } + + rm69380_reset(ctx); + + ret = rm69380_on(ctx); + if (ret < 0) { + dev_err(dev, "Failed to initialize panel: %d\n", ret); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + return ret; + } + + return 0; +} + +static int rm69380_unprepare(struct drm_panel *panel) +{ + struct rm69380_panel *ctx = to_rm69380_panel(panel); + struct device *dev = &ctx->dsi[0]->dev; + int ret; + + ret = rm69380_off(ctx); + if (ret < 0) + dev_err(dev, "Failed to un-initialize panel: %d\n", ret); + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + + return 0; +} + +static const struct drm_display_mode rm69380_mode = { + .clock = (2560 + 32 + 12 + 38) * (1600 + 20 + 4 + 8) * 90 / 1000, + .hdisplay = 2560, + .hsync_start = 2560 + 32, + .hsync_end = 2560 + 32 + 12, + .htotal = 2560 + 32 + 12 + 38, + .vdisplay = 1600, + .vsync_start = 1600 + 20, + .vsync_end = 1600 + 20 + 4, + .vtotal = 1600 + 20 + 4 + 8, + .width_mm = 248, + .height_mm = 155, + .type = DRM_MODE_TYPE_DRIVER, +}; + +static int rm69380_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + return drm_connector_helper_get_modes_fixed(connector, &rm69380_mode); +} + +static const struct drm_panel_funcs rm69380_panel_funcs = { + .prepare = rm69380_prepare, + .unprepare = rm69380_unprepare, + .get_modes = rm69380_get_modes, +}; + +static int rm69380_bl_update_status(struct backlight_device *bl) +{ + struct mipi_dsi_device *dsi = bl_get_data(bl); + u16 brightness = backlight_get_brightness(bl); + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness); + if (ret < 0) + return ret; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + return 0; +} + +static int rm69380_bl_get_brightness(struct backlight_device *bl) +{ + struct mipi_dsi_device *dsi = bl_get_data(bl); + u16 brightness; + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness); + if (ret < 0) + return ret; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + return brightness; +} + +static const struct backlight_ops rm69380_bl_ops = { + .update_status = rm69380_bl_update_status, + .get_brightness = rm69380_bl_get_brightness, +}; + +static struct backlight_device * +rm69380_create_backlight(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + const struct backlight_properties props = { + .type = BACKLIGHT_RAW, + .brightness = 511, + .max_brightness = 2047, + }; + + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, + &rm69380_bl_ops, &props); +} + +static int rm69380_probe(struct mipi_dsi_device *dsi) +{ + struct mipi_dsi_host *dsi_sec_host; + struct rm69380_panel *ctx; + struct device *dev = &dsi->dev; + struct device_node *dsi_sec; + int ret, i; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->supplies[0].supply = "vddio"; + ctx->supplies[1].supply = "avdd"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), + ctx->supplies); + if (ret < 0) + return dev_err_probe(dev, ret, "Failed to get regulators\n"); + + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ctx->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), + "Failed to get reset-gpios\n"); + + dsi_sec = of_graph_get_remote_node(dsi->dev.of_node, 1, -1); + + if (dsi_sec) { + const struct mipi_dsi_device_info info = { "RM69380 DSI1", 0, + dsi_sec }; + + dsi_sec_host = of_find_mipi_dsi_host_by_node(dsi_sec); + of_node_put(dsi_sec); + if (!dsi_sec_host) + return dev_err_probe(dev, -EPROBE_DEFER, + "Cannot get secondary DSI host\n"); + + ctx->dsi[1] = + devm_mipi_dsi_device_register_full(dev, dsi_sec_host, &info); + if (IS_ERR(ctx->dsi[1])) + return dev_err_probe(dev, PTR_ERR(ctx->dsi[1]), + "Cannot get secondary DSI node\n"); + + mipi_dsi_set_drvdata(ctx->dsi[1], ctx); + } + + ctx->dsi[0] = dsi; + mipi_dsi_set_drvdata(dsi, ctx); + + drm_panel_init(&ctx->panel, dev, &rm69380_panel_funcs, + DRM_MODE_CONNECTOR_DSI); + ctx->panel.prepare_prev_first = true; + + ctx->panel.backlight = rm69380_create_backlight(dsi); + if (IS_ERR(ctx->panel.backlight)) + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight), + "Failed to create backlight\n"); + + drm_panel_add(&ctx->panel); + + for (i = 0; i < ARRAY_SIZE(ctx->dsi); i++) { + if (!ctx->dsi[i]) + continue; + + dev_dbg(&ctx->dsi[i]->dev, "Binding DSI %d\n", i); + + ctx->dsi[i]->lanes = 4; + ctx->dsi[i]->format = MIPI_DSI_FMT_RGB888; + ctx->dsi[i]->mode_flags = MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_CLOCK_NON_CONTINUOUS; + + ret = devm_mipi_dsi_attach(dev, ctx->dsi[i]); + if (ret < 0) { + drm_panel_remove(&ctx->panel); + return dev_err_probe(dev, ret, + "Failed to attach to DSI%d\n", i); + } + } + + return 0; +} + +static void rm69380_remove(struct mipi_dsi_device *dsi) +{ + struct rm69380_panel *ctx = mipi_dsi_get_drvdata(dsi); + + drm_panel_remove(&ctx->panel); +} + +static const struct of_device_id rm69380_of_match[] = { + { .compatible = "lenovo,j716f-edo-rm69380" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rm69380_of_match); + +static struct mipi_dsi_driver rm69380_panel_driver = { + .probe = rm69380_probe, + .remove = rm69380_remove, + .driver = { + .name = "panel-raydium-rm69380", + .of_match_table = rm69380_of_match, + }, +}; +module_mipi_dsi_driver(rm69380_panel_driver); + +MODULE_AUTHOR("David Wronek <david@mainlining.org"); +MODULE_DESCRIPTION("DRM driver for Raydium RM69380-equipped DSI panels"); +MODULE_LICENSE("GPL");