[v8,2/4] drm/bridge: add lvds controller support for sam9x7

Commit Message

Dharma Balasubiramani April 21, 2024, 1:10 a.m. UTC

Add a new LVDS controller driver for sam9x7 which does the following:
- Prepares and enables the LVDS Peripheral clock
- Defines its connector type as DRM_MODE_CONNECTOR_LVDS and adds itself
to the global bridge list.
- Identifies its output endpoint as panel and adds it to the encoder
display pipeline
- Enables the LVDS serializer

Signed-off-by: Manikandan Muralidharan <[e-mail]>
Signed-off-by: Dharma Balasubiramani <[e-mail]>
Acked-by: Hari Prasath Gujulan Elango <[e-mail]>
---
Changelog
v7 -> v8
- Assign ret variable properly before checking it for err.
v6 -> v7
- Remove setting encoder type from bridge driver.
- Drop clk_disable() from pm_runtime_get_sync() error handling.
- Use devm_clk_get() instead of prepared version.
- Hence use clk_prepare_enable() and clk_disable_unprepare().
- Use devm_drm_of_get_bridge() instead of devm_drm_panel_bridge_add().
- Add error check for devm_pm_runtime_enable().
- Use dev_err() instead of DRM_DEV_ERROR() as it is deprecated.
- Add missing Acked-by tag.
v5 -> v6
- No Changes.
v4 -> v5
- Drop the unused variable 'format'.
- Use DRM wrapper for dev_err() to maintain uniformity.
- return -ENODEV instead of -EINVAL to maintain consistency with other DRM
  bridge drivers.
v3 -> v4
- No changes.
v2 ->v3
- Correct Typo error "serializer".
- Consolidate get() and prepare() functions and use devm_clk_get_prepared().
- Remove unused variable 'ret' in probe().
- Use devm_pm_runtime_enable() and drop the mchp_lvds_remove().
v1 -> v2
- Drop 'res' variable and combine two lines into one.
- Handle deferred probe properly, use dev_err_probe().
- Don't print anything on deferred probe. Dropped print.
- Remove the MODULE_ALIAS and add MODULE_DEVICE_TABLE().
- symbol 'mchp_lvds_driver' was not declared. It should be static.
---
 drivers/gpu/drm/bridge/Kconfig          |   7 +
 drivers/gpu/drm/bridge/Makefile         |   1 +
 drivers/gpu/drm/bridge/microchip-lvds.c | 229 ++++++++++++++++++++++++
 3 files changed, 237 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/microchip-lvds.c

Comments

Dmitry Baryshkov April 21, 2024, 5:24 p.m. UTC | #1

On Sun, Apr 21, 2024 at 06:40:48AM +0530, Dharma Balasubiramani wrote:
> Add a new LVDS controller driver for sam9x7 which does the following:
> - Prepares and enables the LVDS Peripheral clock
> - Defines its connector type as DRM_MODE_CONNECTOR_LVDS and adds itself
> to the global bridge list.
> - Identifies its output endpoint as panel and adds it to the encoder
> display pipeline
> - Enables the LVDS serializer
> 
> Signed-off-by: Manikandan Muralidharan <[e-mail]>
> Signed-off-by: Dharma Balasubiramani <[e-mail]>
> Acked-by: Hari Prasath Gujulan Elango <[e-mail]>
> ---
> Changelog
> v7 -> v8
> - Assign ret variable properly before checking it for err.
> v6 -> v7
> - Remove setting encoder type from bridge driver.
> - Drop clk_disable() from pm_runtime_get_sync() error handling.
> - Use devm_clk_get() instead of prepared version.
> - Hence use clk_prepare_enable() and clk_disable_unprepare().
> - Use devm_drm_of_get_bridge() instead of devm_drm_panel_bridge_add().
> - Add error check for devm_pm_runtime_enable().
> - Use dev_err() instead of DRM_DEV_ERROR() as it is deprecated.
> - Add missing Acked-by tag.
> v5 -> v6
> - No Changes.
> v4 -> v5
> - Drop the unused variable 'format'.
> - Use DRM wrapper for dev_err() to maintain uniformity.
> - return -ENODEV instead of -EINVAL to maintain consistency with other DRM
>   bridge drivers.
> v3 -> v4
> - No changes.
> v2 ->v3
> - Correct Typo error "serializer".
> - Consolidate get() and prepare() functions and use devm_clk_get_prepared().
> - Remove unused variable 'ret' in probe().
> - Use devm_pm_runtime_enable() and drop the mchp_lvds_remove().
> v1 -> v2
> - Drop 'res' variable and combine two lines into one.
> - Handle deferred probe properly, use dev_err_probe().
> - Don't print anything on deferred probe. Dropped print.
> - Remove the MODULE_ALIAS and add MODULE_DEVICE_TABLE().
> - symbol 'mchp_lvds_driver' was not declared. It should be static.
> ---
>  drivers/gpu/drm/bridge/Kconfig          |   7 +
>  drivers/gpu/drm/bridge/Makefile         |   1 +
>  drivers/gpu/drm/bridge/microchip-lvds.c | 229 ++++++++++++++++++++++++
>  3 files changed, 237 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/microchip-lvds.c
> 

Reviewed-by: Dmitry Baryshkov <[e-mail]>

Patch

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index efd996f6c138..889098e2d65f 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -190,6 +190,13 @@  config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
 	  to DP++. This is used with the i.MX6 imx-ldb
 	  driver. You are likely to say N here.
 
+config DRM_MICROCHIP_LVDS_SERIALIZER
+	tristate "Microchip LVDS serializer support"
+	depends on OF
+	depends on DRM_ATMEL_HLCDC
+	help
+	  Support for Microchip's LVDS serializer.
+
 config DRM_NWL_MIPI_DSI
 	tristate "Northwest Logic MIPI DSI Host controller"
 	depends on DRM
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 017b5832733b..7df87b582dca 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -13,6 +13,7 @@  obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o
 obj-$(CONFIG_DRM_LONTIUM_LT9611UXC) += lontium-lt9611uxc.o
 obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o
 obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
+obj-$(CONFIG_DRM_MICROCHIP_LVDS_SERIALIZER) += microchip-lvds.o
 obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
 obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
 obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o
diff --git a/drivers/gpu/drm/bridge/microchip-lvds.c b/drivers/gpu/drm/bridge/microchip-lvds.c
new file mode 100644
index 000000000000..b8313dad6072
--- /dev/null
+++ b/drivers/gpu/drm/bridge/microchip-lvds.c
@@ -0,0 +1,229 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Manikandan Muralidharan <[e-mail]>
+ * Author: Dharma Balasubiramani <[e-mail]>
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_graph.h>
+#include <linux/pinctrl/devinfo.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#define LVDS_POLL_TIMEOUT_MS 1000
+
+/* LVDSC register offsets */
+#define LVDSC_CR	0x00
+#define LVDSC_CFGR	0x04
+#define LVDSC_SR	0x0C
+#define LVDSC_WPMR	0xE4
+
+/* Bitfields in LVDSC_CR (Control Register) */
+#define LVDSC_CR_SER_EN	BIT(0)
+
+/* Bitfields in LVDSC_CFGR (Configuration Register) */
+#define LVDSC_CFGR_PIXSIZE_24BITS	0
+#define LVDSC_CFGR_DEN_POL_HIGH		0
+#define LVDSC_CFGR_DC_UNBALANCED	0
+#define LVDSC_CFGR_MAPPING_JEIDA	BIT(6)
+
+/*Bitfields in LVDSC_SR */
+#define LVDSC_SR_CS	BIT(0)
+
+/* Bitfields in LVDSC_WPMR (Write Protection Mode Register) */
+#define LVDSC_WPMR_WPKEY_MASK	GENMASK(31, 8)
+#define LVDSC_WPMR_WPKEY_PSSWD	0x4C5644
+
+struct mchp_lvds {
+	struct device *dev;
+	void __iomem *regs;
+	struct clk *pclk;
+	struct drm_panel *panel;
+	struct drm_bridge bridge;
+	struct drm_bridge *panel_bridge;
+};
+
+static inline struct mchp_lvds *bridge_to_lvds(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct mchp_lvds, bridge);
+}
+
+static inline u32 lvds_readl(struct mchp_lvds *lvds, u32 offset)
+{
+	return readl_relaxed(lvds->regs + offset);
+}
+
+static inline void lvds_writel(struct mchp_lvds *lvds, u32 offset, u32 val)
+{
+	writel_relaxed(val, lvds->regs + offset);
+}
+
+static void lvds_serialiser_on(struct mchp_lvds *lvds)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(LVDS_POLL_TIMEOUT_MS);
+
+	/* The LVDSC registers can only be written if WPEN is cleared */
+	lvds_writel(lvds, LVDSC_WPMR, (LVDSC_WPMR_WPKEY_PSSWD &
+				LVDSC_WPMR_WPKEY_MASK));
+
+	/* Wait for the status of configuration registers to be changed */
+	while (lvds_readl(lvds, LVDSC_SR) & LVDSC_SR_CS) {
+		if (time_after(jiffies, timeout)) {
+			dev_err(lvds->dev, "%s: timeout error\n", __func__);
+			return;
+		}
+		usleep_range(1000, 2000);
+	}
+
+	/* Configure the LVDSC */
+	lvds_writel(lvds, LVDSC_CFGR, (LVDSC_CFGR_MAPPING_JEIDA |
+				LVDSC_CFGR_DC_UNBALANCED |
+				LVDSC_CFGR_DEN_POL_HIGH |
+				LVDSC_CFGR_PIXSIZE_24BITS));
+
+	/* Enable the LVDS serializer */
+	lvds_writel(lvds, LVDSC_CR, LVDSC_CR_SER_EN);
+}
+
+static int mchp_lvds_attach(struct drm_bridge *bridge,
+			    enum drm_bridge_attach_flags flags)
+{
+	struct mchp_lvds *lvds = bridge_to_lvds(bridge);
+
+	return drm_bridge_attach(bridge->encoder, lvds->panel_bridge,
+				 bridge, flags);
+}
+
+static void mchp_lvds_enable(struct drm_bridge *bridge)
+{
+	struct mchp_lvds *lvds = bridge_to_lvds(bridge);
+	int ret;
+
+	ret = clk_prepare_enable(lvds->pclk);
+	if (ret < 0) {
+		dev_err(lvds->dev, "failed to enable lvds pclk %d\n", ret);
+		return;
+	}
+
+	ret = pm_runtime_get_sync(lvds->dev);
+	if (ret < 0) {
+		dev_err(lvds->dev, "failed to get pm runtime: %d\n", ret);
+		return;
+	}
+
+	lvds_serialiser_on(lvds);
+}
+
+static void mchp_lvds_disable(struct drm_bridge *bridge)
+{
+	struct mchp_lvds *lvds = bridge_to_lvds(bridge);
+
+	pm_runtime_put(lvds->dev);
+	clk_disable_unprepare(lvds->pclk);
+}
+
+static const struct drm_bridge_funcs mchp_lvds_bridge_funcs = {
+	.attach = mchp_lvds_attach,
+	.enable = mchp_lvds_enable,
+	.disable = mchp_lvds_disable,
+};
+
+static int mchp_lvds_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mchp_lvds *lvds;
+	struct device_node *port;
+	int ret;
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
+	if (!lvds)
+		return -ENOMEM;
+
+	lvds->dev = dev;
+
+	lvds->regs = devm_ioremap_resource(lvds->dev,
+			platform_get_resource(pdev, IORESOURCE_MEM, 0));
+	if (IS_ERR(lvds->regs))
+		return PTR_ERR(lvds->regs);
+
+	lvds->pclk = devm_clk_get(lvds->dev, "pclk");
+	if (IS_ERR(lvds->pclk))
+		return dev_err_probe(lvds->dev, PTR_ERR(lvds->pclk),
+				"could not get pclk_lvds\n");
+
+	port = of_graph_get_remote_node(dev->of_node, 1, 0);
+	if (!port) {
+		dev_err(dev,
+			"can't find port point, please init lvds panel port!\n");
+		return -ENODEV;
+	}
+
+	lvds->panel = of_drm_find_panel(port);
+	of_node_put(port);
+
+	if (IS_ERR(lvds->panel))
+		return -EPROBE_DEFER;
+
+	lvds->panel_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0);
+
+	if (IS_ERR(lvds->panel_bridge))
+		return PTR_ERR(lvds->panel_bridge);
+
+	lvds->bridge.of_node = dev->of_node;
+	lvds->bridge.type = DRM_MODE_CONNECTOR_LVDS;
+	lvds->bridge.funcs = &mchp_lvds_bridge_funcs;
+
+	dev_set_drvdata(dev, lvds);
+	ret = devm_pm_runtime_enable(dev);
+	if (ret < 0) {
+		dev_err(lvds->dev, "failed to enable pm runtime: %d\n", ret);
+		return ret;
+	}
+
+	drm_bridge_add(&lvds->bridge);
+
+	return 0;
+}
+
+static const struct of_device_id mchp_lvds_dt_ids[] = {
+	{
+		.compatible = "microchip,sam9x75-lvds",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mchp_lvds_dt_ids);
+
+static struct platform_driver mchp_lvds_driver = {
+	.probe = mchp_lvds_probe,
+	.driver = {
+		   .name = "microchip-lvds",
+		   .of_match_table = mchp_lvds_dt_ids,
+	},
+};
+module_platform_driver(mchp_lvds_driver);
+
+MODULE_AUTHOR("Manikandan Muralidharan <[e-mail]>");
+MODULE_AUTHOR("Dharma Balasubiramani <[e-mail]>");
+MODULE_DESCRIPTION("Low Voltage Differential Signaling Controller Driver");
+MODULE_LICENSE("GPL");