diff mbox series

[v3,9/9] drm/panel: innolux-p079zca: Don't use a table for initting panels

Message ID 20240501084109.v3.9.I947e28c81f9ef7dcd3add6e193be72d6f8ea086f@changeid (mailing list archive)
State New, archived
Headers show
Series drm/mipi-dsi: Reduce bloat and add funcs for cleaner init seqs | expand

Commit Message

Douglas Anderson May 1, 2024, 3:41 p.m. UTC 
Consensus on the mailing lists is that panels shouldn't use a table of
init commands but should instead use init functions. We'll use the
same concepts as the recently introduced
mipi_dsi_generic_write_seq_multi() to make this clean/easy and also
not bloat the driver too much. Measuring before/after this change:

$ scripts/bloat-o-meter \
  .../before/panel-innolux-p079zca.ko \
  .../after/panel-innolux-p079zca.ko
add/remove: 3/2 grow/shrink: 0/1 up/down: 2356/-1944 (412)
Function                                     old     new   delta
innolux_p097pfg_init                           -    1772   +1772
innolux_p097pfg_init.d                         -     480    +480
innolux_panel_write_multi                      -     104    +104
innolux_panel_prepare                        412     308    -104
.compoundliteral                             480       -    -480
innolux_p097pfg_init_cmds                   1360       -   -1360
Total: Before=5802, After=6214, chg +7.10%

Note that, unlike some other drivers, we actually make this panel
driver _bigger_ by using the new functions. This is because the
innolux-p079zca panel driver didn't have as complex of a table and
thus the old table was more efficient than the code. The bloat is
still not giant (only 412 bytes).

Also note that we can't direclty use
mipi_dsi_generic_write_seq_multi() here because we need to deal with
the crazy "nop" that this driver sends after all commands. This means
that we have to write code that is "inspired" by the new macros.

Since we're touching all the tables, let's also convert hex numbers to
lower case as per kernel conventions.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

Changes in v3:
- New

 drivers/gpu/drm/panel/panel-innolux-p079zca.c | 284 +++++++++---------
 1 file changed, 139 insertions(+), 145 deletions(-)

Comments

Douglas Anderson May 3, 2024, 4:32 p.m. UTC | #1 
Hi,

On Wed, May 1, 2024 at 8:43 AM Douglas Anderson <dianders@chromium.org> wrote:
>
> @@ -132,33 +125,9 @@ static int innolux_panel_prepare(struct drm_panel *panel)
>         /* p079zca: t4, p097pfg: t5 */
>         usleep_range(20000, 21000);
>
> -       if (innolux->desc->init_cmds) {
> -               const struct panel_init_cmd *cmds =
> -                                       innolux->desc->init_cmds;
> -               unsigned int i;
> -
> -               for (i = 0; cmds[i].len != 0; i++) {
> -                       const struct panel_init_cmd *cmd = &cmds[i];
> -
> -                       err = mipi_dsi_generic_write(innolux->link, cmd->data,
> -                                                    cmd->len);
> -                       if (err < 0) {
> -                               dev_err(panel->dev, "failed to write command %u\n", i);
> -                               goto poweroff;
> -                       }
> -
> -                       /*
> -                        * Included by random guessing, because without this
> -                        * (or at least, some delay), the panel sometimes
> -                        * didn't appear to pick up the command sequence.
> -                        */
> -                       err = mipi_dsi_dcs_nop(innolux->link);
> -                       if (err < 0) {
> -                               dev_err(panel->dev, "failed to send DCS nop: %d\n", err);
> -                               goto poweroff;
> -                       }
> -               }
> -       }
> +       err = innolux->desc->init(innolux);
> +       if (err < 0)
> +               goto poweroff;

FWIW, I happened to notice a bug in the above by code inspection. The
old code checked "if (innolux->desc->init_cmds)" and thus handled
init_cmds being NULL. The new code doesn't handle the init function
being NULL. One of the two panels in this file (which seems to have no
users in mainline) doesn't specify an init sequence.

I'll spin this next week with the extra "if" test.

-Doug
Linus Walleij May 6, 2024, 6:45 a.m. UTC | #2 
On Wed, May 1, 2024 at 5:43 PM Douglas Anderson <dianders@chromium.org> wrote:

> Consensus on the mailing lists is that panels shouldn't use a table of
> init commands but should instead use init functions. We'll use the
> same concepts as the recently introduced
> mipi_dsi_generic_write_seq_multi() to make this clean/easy and also
> not bloat the driver too much. Measuring before/after this change:
>
> $ scripts/bloat-o-meter \
>   .../before/panel-innolux-p079zca.ko \
>   .../after/panel-innolux-p079zca.ko
> add/remove: 3/2 grow/shrink: 0/1 up/down: 2356/-1944 (412)
> Function                                     old     new   delta
> innolux_p097pfg_init                           -    1772   +1772
> innolux_p097pfg_init.d                         -     480    +480
> innolux_panel_write_multi                      -     104    +104
> innolux_panel_prepare                        412     308    -104
> .compoundliteral                             480       -    -480
> innolux_p097pfg_init_cmds                   1360       -   -1360
> Total: Before=5802, After=6214, chg +7.10%
>
> Note that, unlike some other drivers, we actually make this panel
> driver _bigger_ by using the new functions. This is because the
> innolux-p079zca panel driver didn't have as complex of a table and
> thus the old table was more efficient than the code. The bloat is
> still not giant (only 412 bytes).
>
> Also note that we can't direclty use
> mipi_dsi_generic_write_seq_multi() here because we need to deal with
> the crazy "nop" that this driver sends after all commands. This means
> that we have to write code that is "inspired" by the new macros.
>
> Since we're touching all the tables, let's also convert hex numbers to
> lower case as per kernel conventions.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

With the mentioned bugfix:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/gpu/drm/panel/panel-innolux-p079zca.c b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
index 485178a99910..18ab7d9f160c 100644
--- a/drivers/gpu/drm/panel/panel-innolux-p079zca.c
+++ b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
@@ -17,14 +17,7 @@ 
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
 
-struct panel_init_cmd {
-	size_t len;
-	const char *data;
-};
-
-#define _INIT_CMD(...) { \
-	.len = sizeof((char[]){__VA_ARGS__}), \
-	.data = (char[]){__VA_ARGS__} }
+struct innolux_panel;
 
 struct panel_desc {
 	const struct drm_display_mode *mode;
@@ -36,7 +29,7 @@  struct panel_desc {
 
 	unsigned long flags;
 	enum mipi_dsi_pixel_format format;
-	const struct panel_init_cmd *init_cmds;
+	int (*init)(struct innolux_panel *innolux);
 	unsigned int lanes;
 	const char * const *supply_names;
 	unsigned int num_supplies;
@@ -132,33 +125,9 @@  static int innolux_panel_prepare(struct drm_panel *panel)
 	/* p079zca: t4, p097pfg: t5 */
 	usleep_range(20000, 21000);
 
-	if (innolux->desc->init_cmds) {
-		const struct panel_init_cmd *cmds =
-					innolux->desc->init_cmds;
-		unsigned int i;
-
-		for (i = 0; cmds[i].len != 0; i++) {
-			const struct panel_init_cmd *cmd = &cmds[i];
-
-			err = mipi_dsi_generic_write(innolux->link, cmd->data,
-						     cmd->len);
-			if (err < 0) {
-				dev_err(panel->dev, "failed to write command %u\n", i);
-				goto poweroff;
-			}
-
-			/*
-			 * Included by random guessing, because without this
-			 * (or at least, some delay), the panel sometimes
-			 * didn't appear to pick up the command sequence.
-			 */
-			err = mipi_dsi_dcs_nop(innolux->link);
-			if (err < 0) {
-				dev_err(panel->dev, "failed to send DCS nop: %d\n", err);
-				goto poweroff;
-			}
-		}
-	}
+	err = innolux->desc->init(innolux);
+	if (err < 0)
+		goto poweroff;
 
 	err = mipi_dsi_dcs_exit_sleep_mode(innolux->link);
 	if (err < 0) {
@@ -250,119 +219,144 @@  static const struct drm_display_mode innolux_p097pfg_mode = {
 	.vtotal = 2048 + 100 + 2 + 18,
 };
 
+static void innolux_panel_write_multi(struct mipi_dsi_multi_context *ctx,
+				      const void *payload, size_t size)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+
+	mipi_dsi_generic_write_multi(ctx, payload, size);
+	if (ctx->accum_err)
+		return;
+
+	/*
+	 * Included by random guessing, because without this
+	 * (or at least, some delay), the panel sometimes
+	 * didn't appear to pick up the command sequence.
+	 */
+	ctx->accum_err = mipi_dsi_dcs_nop(ctx->dsi);
+	if (ctx->accum_err)
+		dev_err(dev, "failed to send DCS nop: %d\n", ctx->accum_err);
+}
+
+#define innolux_panel_init_cmd_multi(ctx, seq...)                 \
+	do {                                                      \
+		static const u8 d[] = { seq };                    \
+		innolux_panel_write_multi(ctx, d, ARRAY_SIZE(d)); \
+	} while (0)
+
+#define innolux_panel_switch_page(ctx, page) \
+	innolux_panel_init_cmd_multi(ctx, 0xf0, 0x55, 0xaa, 0x52, 0x08, (page))
+
 /*
  * Display manufacturer failed to provide init sequencing according to
  * https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/892065/
  * so the init sequence stems from a register dump of a working panel.
  */
-static const struct panel_init_cmd innolux_p097pfg_init_cmds[] = {
-	/* page 0 */
-	_INIT_CMD(0xF0, 0x55, 0xAA, 0x52, 0x08, 0x00),
-	_INIT_CMD(0xB1, 0xE8, 0x11),
-	_INIT_CMD(0xB2, 0x25, 0x02),
-	_INIT_CMD(0xB5, 0x08, 0x00),
-	_INIT_CMD(0xBC, 0x0F, 0x00),
-	_INIT_CMD(0xB8, 0x03, 0x06, 0x00, 0x00),
-	_INIT_CMD(0xBD, 0x01, 0x90, 0x14, 0x14),
-	_INIT_CMD(0x6F, 0x01),
-	_INIT_CMD(0xC0, 0x03),
-	_INIT_CMD(0x6F, 0x02),
-	_INIT_CMD(0xC1, 0x0D),
-	_INIT_CMD(0xD9, 0x01, 0x09, 0x70),
-	_INIT_CMD(0xC5, 0x12, 0x21, 0x00),
-	_INIT_CMD(0xBB, 0x93, 0x93),
-
-	/* page 1 */
-	_INIT_CMD(0xF0, 0x55, 0xAA, 0x52, 0x08, 0x01),
-	_INIT_CMD(0xB3, 0x3C, 0x3C),
-	_INIT_CMD(0xB4, 0x0F, 0x0F),
-	_INIT_CMD(0xB9, 0x45, 0x45),
-	_INIT_CMD(0xBA, 0x14, 0x14),
-	_INIT_CMD(0xCA, 0x02),
-	_INIT_CMD(0xCE, 0x04),
-	_INIT_CMD(0xC3, 0x9B, 0x9B),
-	_INIT_CMD(0xD8, 0xC0, 0x03),
-	_INIT_CMD(0xBC, 0x82, 0x01),
-	_INIT_CMD(0xBD, 0x9E, 0x01),
-
-	/* page 2 */
-	_INIT_CMD(0xF0, 0x55, 0xAA, 0x52, 0x08, 0x02),
-	_INIT_CMD(0xB0, 0x82),
-	_INIT_CMD(0xD1, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x82, 0x00, 0xA5,
-		  0x00, 0xC1, 0x00, 0xEA, 0x01, 0x0D, 0x01, 0x40),
-	_INIT_CMD(0xD2, 0x01, 0x6A, 0x01, 0xA8, 0x01, 0xDC, 0x02, 0x29,
-		  0x02, 0x67, 0x02, 0x68, 0x02, 0xA8, 0x02, 0xF0),
-	_INIT_CMD(0xD3, 0x03, 0x19, 0x03, 0x49, 0x03, 0x67, 0x03, 0x8C,
-		  0x03, 0xA6, 0x03, 0xC7, 0x03, 0xDE, 0x03, 0xEC),
-	_INIT_CMD(0xD4, 0x03, 0xFF, 0x03, 0xFF),
-	_INIT_CMD(0xE0, 0x00, 0x00, 0x00, 0x86, 0x00, 0xC5, 0x00, 0xE5,
-		  0x00, 0xFF, 0x01, 0x26, 0x01, 0x45, 0x01, 0x75),
-	_INIT_CMD(0xE1, 0x01, 0x9C, 0x01, 0xD5, 0x02, 0x05, 0x02, 0x4D,
-		  0x02, 0x86, 0x02, 0x87, 0x02, 0xC3, 0x03, 0x03),
-	_INIT_CMD(0xE2, 0x03, 0x2A, 0x03, 0x56, 0x03, 0x72, 0x03, 0x94,
-		  0x03, 0xAC, 0x03, 0xCB, 0x03, 0xE0, 0x03, 0xED),
-	_INIT_CMD(0xE3, 0x03, 0xFF, 0x03, 0xFF),
-
-	/* page 3 */
-	_INIT_CMD(0xF0, 0x55, 0xAA, 0x52, 0x08, 0x03),
-	_INIT_CMD(0xB0, 0x00, 0x00, 0x00, 0x00),
-	_INIT_CMD(0xB1, 0x00, 0x00, 0x00, 0x00),
-	_INIT_CMD(0xB2, 0x00, 0x00, 0x06, 0x04, 0x01, 0x40, 0x85),
-	_INIT_CMD(0xB3, 0x10, 0x07, 0xFC, 0x04, 0x01, 0x40, 0x80),
-	_INIT_CMD(0xB6, 0xF0, 0x08, 0x00, 0x04, 0x00, 0x00, 0x00, 0x01,
-		  0x40, 0x80),
-	_INIT_CMD(0xBA, 0xC5, 0x07, 0x00, 0x04, 0x11, 0x25, 0x8C),
-	_INIT_CMD(0xBB, 0xC5, 0x07, 0x00, 0x03, 0x11, 0x25, 0x8C),
-	_INIT_CMD(0xC0, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x80, 0x80),
-	_INIT_CMD(0xC1, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x80, 0x80),
-	_INIT_CMD(0xC4, 0x00, 0x00),
-	_INIT_CMD(0xEF, 0x41),
-
-	/* page 4 */
-	_INIT_CMD(0xF0, 0x55, 0xAA, 0x52, 0x08, 0x04),
-	_INIT_CMD(0xEC, 0x4C),
-
-	/* page 5 */
-	_INIT_CMD(0xF0, 0x55, 0xAA, 0x52, 0x08, 0x05),
-	_INIT_CMD(0xB0, 0x13, 0x03, 0x03, 0x01),
-	_INIT_CMD(0xB1, 0x30, 0x00),
-	_INIT_CMD(0xB2, 0x02, 0x02, 0x00),
-	_INIT_CMD(0xB3, 0x82, 0x23, 0x82, 0x9D),
-	_INIT_CMD(0xB4, 0xC5, 0x75, 0x24, 0x57),
-	_INIT_CMD(0xB5, 0x00, 0xD4, 0x72, 0x11, 0x11, 0xAB, 0x0A),
-	_INIT_CMD(0xB6, 0x00, 0x00, 0xD5, 0x72, 0x24, 0x56),
-	_INIT_CMD(0xB7, 0x5C, 0xDC, 0x5C, 0x5C),
-	_INIT_CMD(0xB9, 0x0C, 0x00, 0x00, 0x01, 0x00),
-	_INIT_CMD(0xC0, 0x75, 0x11, 0x11, 0x54, 0x05),
-	_INIT_CMD(0xC6, 0x00, 0x00, 0x00, 0x00),
-	_INIT_CMD(0xD0, 0x00, 0x48, 0x08, 0x00, 0x00),
-	_INIT_CMD(0xD1, 0x00, 0x48, 0x09, 0x00, 0x00),
-
-	/* page 6 */
-	_INIT_CMD(0xF0, 0x55, 0xAA, 0x52, 0x08, 0x06),
-	_INIT_CMD(0xB0, 0x02, 0x32, 0x32, 0x08, 0x2F),
-	_INIT_CMD(0xB1, 0x2E, 0x15, 0x14, 0x13, 0x12),
-	_INIT_CMD(0xB2, 0x11, 0x10, 0x00, 0x3D, 0x3D),
-	_INIT_CMD(0xB3, 0x3D, 0x3D, 0x3D, 0x3D, 0x3D),
-	_INIT_CMD(0xB4, 0x3D, 0x32),
-	_INIT_CMD(0xB5, 0x03, 0x32, 0x32, 0x09, 0x2F),
-	_INIT_CMD(0xB6, 0x2E, 0x1B, 0x1A, 0x19, 0x18),
-	_INIT_CMD(0xB7, 0x17, 0x16, 0x01, 0x3D, 0x3D),
-	_INIT_CMD(0xB8, 0x3D, 0x3D, 0x3D, 0x3D, 0x3D),
-	_INIT_CMD(0xB9, 0x3D, 0x32),
-	_INIT_CMD(0xC0, 0x01, 0x32, 0x32, 0x09, 0x2F),
-	_INIT_CMD(0xC1, 0x2E, 0x1A, 0x1B, 0x16, 0x17),
-	_INIT_CMD(0xC2, 0x18, 0x19, 0x03, 0x3D, 0x3D),
-	_INIT_CMD(0xC3, 0x3D, 0x3D, 0x3D, 0x3D, 0x3D),
-	_INIT_CMD(0xC4, 0x3D, 0x32),
-	_INIT_CMD(0xC5, 0x00, 0x32, 0x32, 0x08, 0x2F),
-	_INIT_CMD(0xC6, 0x2E, 0x14, 0x15, 0x10, 0x11),
-	_INIT_CMD(0xC7, 0x12, 0x13, 0x02, 0x3D, 0x3D),
-	_INIT_CMD(0xC8, 0x3D, 0x3D, 0x3D, 0x3D, 0x3D),
-	_INIT_CMD(0xC9, 0x3D, 0x32),
-
-	{},
-};
+static int innolux_p097pfg_init(struct innolux_panel *innolux)
+{
+	struct mipi_dsi_multi_context ctx = { .dsi = innolux->link };
+
+	innolux_panel_switch_page(&ctx, 0x00);
+	innolux_panel_init_cmd_multi(&ctx, 0xb1, 0xe8, 0x11);
+	innolux_panel_init_cmd_multi(&ctx, 0xb2, 0x25, 0x02);
+	innolux_panel_init_cmd_multi(&ctx, 0xb5, 0x08, 0x00);
+	innolux_panel_init_cmd_multi(&ctx, 0xbc, 0x0f, 0x00);
+	innolux_panel_init_cmd_multi(&ctx, 0xb8, 0x03, 0x06, 0x00, 0x00);
+	innolux_panel_init_cmd_multi(&ctx, 0xbd, 0x01, 0x90, 0x14, 0x14);
+	innolux_panel_init_cmd_multi(&ctx, 0x6f, 0x01);
+	innolux_panel_init_cmd_multi(&ctx, 0xc0, 0x03);
+	innolux_panel_init_cmd_multi(&ctx, 0x6f, 0x02);
+	innolux_panel_init_cmd_multi(&ctx, 0xc1, 0x0d);
+	innolux_panel_init_cmd_multi(&ctx, 0xd9, 0x01, 0x09, 0x70);
+	innolux_panel_init_cmd_multi(&ctx, 0xc5, 0x12, 0x21, 0x00);
+	innolux_panel_init_cmd_multi(&ctx, 0xbb, 0x93, 0x93);
+
+	innolux_panel_switch_page(&ctx, 0x01);
+	innolux_panel_init_cmd_multi(&ctx, 0xb3, 0x3c, 0x3c);
+	innolux_panel_init_cmd_multi(&ctx, 0xb4, 0x0f, 0x0f);
+	innolux_panel_init_cmd_multi(&ctx, 0xb9, 0x45, 0x45);
+	innolux_panel_init_cmd_multi(&ctx, 0xba, 0x14, 0x14);
+	innolux_panel_init_cmd_multi(&ctx, 0xca, 0x02);
+	innolux_panel_init_cmd_multi(&ctx, 0xce, 0x04);
+	innolux_panel_init_cmd_multi(&ctx, 0xc3, 0x9b, 0x9b);
+	innolux_panel_init_cmd_multi(&ctx, 0xd8, 0xc0, 0x03);
+	innolux_panel_init_cmd_multi(&ctx, 0xbc, 0x82, 0x01);
+	innolux_panel_init_cmd_multi(&ctx, 0xbd, 0x9e, 0x01);
+
+	innolux_panel_switch_page(&ctx, 0x02);
+	innolux_panel_init_cmd_multi(&ctx, 0xb0, 0x82);
+	innolux_panel_init_cmd_multi(&ctx, 0xd1, 0x00, 0x00, 0x00, 0x3e, 0x00, 0x82, 0x00, 0xa5,
+				     0x00, 0xc1, 0x00, 0xea, 0x01, 0x0d, 0x01, 0x40);
+	innolux_panel_init_cmd_multi(&ctx, 0xd2, 0x01, 0x6a, 0x01, 0xa8, 0x01, 0xdc, 0x02, 0x29,
+				     0x02, 0x67, 0x02, 0x68, 0x02, 0xa8, 0x02, 0xf0);
+	innolux_panel_init_cmd_multi(&ctx, 0xd3, 0x03, 0x19, 0x03, 0x49, 0x03, 0x67, 0x03, 0x8c,
+				     0x03, 0xa6, 0x03, 0xc7, 0x03, 0xde, 0x03, 0xec);
+	innolux_panel_init_cmd_multi(&ctx, 0xd4, 0x03, 0xff, 0x03, 0xff);
+	innolux_panel_init_cmd_multi(&ctx, 0xe0, 0x00, 0x00, 0x00, 0x86, 0x00, 0xc5, 0x00, 0xe5,
+				     0x00, 0xff, 0x01, 0x26, 0x01, 0x45, 0x01, 0x75);
+	innolux_panel_init_cmd_multi(&ctx, 0xe1, 0x01, 0x9c, 0x01, 0xd5, 0x02, 0x05, 0x02, 0x4d,
+				     0x02, 0x86, 0x02, 0x87, 0x02, 0xc3, 0x03, 0x03);
+	innolux_panel_init_cmd_multi(&ctx, 0xe2, 0x03, 0x2a, 0x03, 0x56, 0x03, 0x72, 0x03, 0x94,
+				     0x03, 0xac, 0x03, 0xcb, 0x03, 0xe0, 0x03, 0xed);
+	innolux_panel_init_cmd_multi(&ctx, 0xe3, 0x03, 0xff, 0x03, 0xff);
+
+	innolux_panel_switch_page(&ctx, 0x03);
+	innolux_panel_init_cmd_multi(&ctx, 0xb0, 0x00, 0x00, 0x00, 0x00);
+	innolux_panel_init_cmd_multi(&ctx, 0xb1, 0x00, 0x00, 0x00, 0x00);
+	innolux_panel_init_cmd_multi(&ctx, 0xb2, 0x00, 0x00, 0x06, 0x04, 0x01, 0x40, 0x85);
+	innolux_panel_init_cmd_multi(&ctx, 0xb3, 0x10, 0x07, 0xfc, 0x04, 0x01, 0x40, 0x80);
+	innolux_panel_init_cmd_multi(&ctx, 0xb6, 0xf0, 0x08, 0x00, 0x04, 0x00, 0x00, 0x00, 0x01,
+				     0x40, 0x80);
+	innolux_panel_init_cmd_multi(&ctx, 0xba, 0xc5, 0x07, 0x00, 0x04, 0x11, 0x25, 0x8c);
+	innolux_panel_init_cmd_multi(&ctx, 0xbb, 0xc5, 0x07, 0x00, 0x03, 0x11, 0x25, 0x8c);
+	innolux_panel_init_cmd_multi(&ctx, 0xc0, 0x00, 0x3c, 0x00, 0x00, 0x00, 0x80, 0x80);
+	innolux_panel_init_cmd_multi(&ctx, 0xc1, 0x00, 0x3c, 0x00, 0x00, 0x00, 0x80, 0x80);
+	innolux_panel_init_cmd_multi(&ctx, 0xc4, 0x00, 0x00);
+	innolux_panel_init_cmd_multi(&ctx, 0xef, 0x41);
+
+	innolux_panel_switch_page(&ctx, 0x04);
+	innolux_panel_init_cmd_multi(&ctx, 0xec, 0x4c);
+
+	innolux_panel_switch_page(&ctx, 0x05);
+	innolux_panel_init_cmd_multi(&ctx, 0xb0, 0x13, 0x03, 0x03, 0x01);
+	innolux_panel_init_cmd_multi(&ctx, 0xb1, 0x30, 0x00);
+	innolux_panel_init_cmd_multi(&ctx, 0xb2, 0x02, 0x02, 0x00);
+	innolux_panel_init_cmd_multi(&ctx, 0xb3, 0x82, 0x23, 0x82, 0x9d);
+	innolux_panel_init_cmd_multi(&ctx, 0xb4, 0xc5, 0x75, 0x24, 0x57);
+	innolux_panel_init_cmd_multi(&ctx, 0xb5, 0x00, 0xd4, 0x72, 0x11, 0x11, 0xab, 0x0a);
+	innolux_panel_init_cmd_multi(&ctx, 0xb6, 0x00, 0x00, 0xd5, 0x72, 0x24, 0x56);
+	innolux_panel_init_cmd_multi(&ctx, 0xb7, 0x5c, 0xdc, 0x5c, 0x5c);
+	innolux_panel_init_cmd_multi(&ctx, 0xb9, 0x0c, 0x00, 0x00, 0x01, 0x00);
+	innolux_panel_init_cmd_multi(&ctx, 0xc0, 0x75, 0x11, 0x11, 0x54, 0x05);
+	innolux_panel_init_cmd_multi(&ctx, 0xc6, 0x00, 0x00, 0x00, 0x00);
+	innolux_panel_init_cmd_multi(&ctx, 0xd0, 0x00, 0x48, 0x08, 0x00, 0x00);
+	innolux_panel_init_cmd_multi(&ctx, 0xd1, 0x00, 0x48, 0x09, 0x00, 0x00);
+
+	innolux_panel_switch_page(&ctx, 0x06);
+	innolux_panel_init_cmd_multi(&ctx, 0xb0, 0x02, 0x32, 0x32, 0x08, 0x2f);
+	innolux_panel_init_cmd_multi(&ctx, 0xb1, 0x2e, 0x15, 0x14, 0x13, 0x12);
+	innolux_panel_init_cmd_multi(&ctx, 0xb2, 0x11, 0x10, 0x00, 0x3d, 0x3d);
+	innolux_panel_init_cmd_multi(&ctx, 0xb3, 0x3d, 0x3d, 0x3d, 0x3d, 0x3d);
+	innolux_panel_init_cmd_multi(&ctx, 0xb4, 0x3d, 0x32);
+	innolux_panel_init_cmd_multi(&ctx, 0xb5, 0x03, 0x32, 0x32, 0x09, 0x2f);
+	innolux_panel_init_cmd_multi(&ctx, 0xb6, 0x2e, 0x1b, 0x1a, 0x19, 0x18);
+	innolux_panel_init_cmd_multi(&ctx, 0xb7, 0x17, 0x16, 0x01, 0x3d, 0x3d);
+	innolux_panel_init_cmd_multi(&ctx, 0xb8, 0x3d, 0x3d, 0x3d, 0x3d, 0x3d);
+	innolux_panel_init_cmd_multi(&ctx, 0xb9, 0x3d, 0x32);
+	innolux_panel_init_cmd_multi(&ctx, 0xc0, 0x01, 0x32, 0x32, 0x09, 0x2f);
+	innolux_panel_init_cmd_multi(&ctx, 0xc1, 0x2e, 0x1a, 0x1b, 0x16, 0x17);
+	innolux_panel_init_cmd_multi(&ctx, 0xc2, 0x18, 0x19, 0x03, 0x3d, 0x3d);
+	innolux_panel_init_cmd_multi(&ctx, 0xc3, 0x3d, 0x3d, 0x3d, 0x3d, 0x3d);
+	innolux_panel_init_cmd_multi(&ctx, 0xc4, 0x3d, 0x32);
+	innolux_panel_init_cmd_multi(&ctx, 0xc5, 0x00, 0x32, 0x32, 0x08, 0x2f);
+	innolux_panel_init_cmd_multi(&ctx, 0xc6, 0x2e, 0x14, 0x15, 0x10, 0x11);
+	innolux_panel_init_cmd_multi(&ctx, 0xc7, 0x12, 0x13, 0x02, 0x3d, 0x3d);
+	innolux_panel_init_cmd_multi(&ctx, 0xc8, 0x3d, 0x3d, 0x3d, 0x3d, 0x3d);
+	innolux_panel_init_cmd_multi(&ctx, 0xc9, 0x3d, 0x32);
+
+	return ctx.accum_err;
+}
 
 static const struct panel_desc innolux_p097pfg_panel_desc = {
 	.mode = &innolux_p097pfg_mode,
@@ -374,7 +368,7 @@  static const struct panel_desc innolux_p097pfg_panel_desc = {
 	.flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
 		 MIPI_DSI_MODE_LPM,
 	.format = MIPI_DSI_FMT_RGB888,
-	.init_cmds = innolux_p097pfg_init_cmds,
+	.init = innolux_p097pfg_init,
 	.lanes = 4,
 	.supply_names = innolux_p097pfg_supply_names,
 	.num_supplies = ARRAY_SIZE(innolux_p097pfg_supply_names),