@@ -1605,6 +1605,35 @@ static irqreturn_t irq_handler(int irq, void *data)
return ret;
}
+static int etnaviv_gpu_clk_get(struct etnaviv_gpu *gpu)
+{
+ struct device *dev = gpu->dev;
+
+ gpu->clk_reg = devm_clk_get_optional(dev, "reg");
+ DBG("clk_reg: %p", gpu->clk_reg);
+ if (IS_ERR(gpu->clk_reg))
+ return PTR_ERR(gpu->clk_reg);
+
+ gpu->clk_bus = devm_clk_get_optional(dev, "bus");
+ DBG("clk_bus: %p", gpu->clk_bus);
+ if (IS_ERR(gpu->clk_bus))
+ return PTR_ERR(gpu->clk_bus);
+
+ gpu->clk_core = devm_clk_get(dev, "core");
+ DBG("clk_core: %p", gpu->clk_core);
+ if (IS_ERR(gpu->clk_core))
+ return PTR_ERR(gpu->clk_core);
+ gpu->base_rate_core = clk_get_rate(gpu->clk_core);
+
+ gpu->clk_shader = devm_clk_get_optional(dev, "shader");
+ DBG("clk_shader: %p", gpu->clk_shader);
+ if (IS_ERR(gpu->clk_shader))
+ return PTR_ERR(gpu->clk_shader);
+ gpu->base_rate_shader = clk_get_rate(gpu->clk_shader);
+
+ return 0;
+}
+
static int etnaviv_gpu_clk_enable(struct etnaviv_gpu *gpu)
{
int ret;
@@ -1880,27 +1909,9 @@ static int etnaviv_gpu_platform_probe(struct platform_device *pdev)
}
/* Get Clocks: */
- gpu->clk_reg = devm_clk_get_optional(&pdev->dev, "reg");
- DBG("clk_reg: %p", gpu->clk_reg);
- if (IS_ERR(gpu->clk_reg))
- return PTR_ERR(gpu->clk_reg);
-
- gpu->clk_bus = devm_clk_get_optional(&pdev->dev, "bus");
- DBG("clk_bus: %p", gpu->clk_bus);
- if (IS_ERR(gpu->clk_bus))
- return PTR_ERR(gpu->clk_bus);
-
- gpu->clk_core = devm_clk_get(&pdev->dev, "core");
- DBG("clk_core: %p", gpu->clk_core);
- if (IS_ERR(gpu->clk_core))
- return PTR_ERR(gpu->clk_core);
- gpu->base_rate_core = clk_get_rate(gpu->clk_core);
-
- gpu->clk_shader = devm_clk_get_optional(&pdev->dev, "shader");
- DBG("clk_shader: %p", gpu->clk_shader);
- if (IS_ERR(gpu->clk_shader))
- return PTR_ERR(gpu->clk_shader);
- gpu->base_rate_shader = clk_get_rate(gpu->clk_shader);
+ err = etnaviv_gpu_clk_get(gpu);
+ if (err)
+ return err;
/* TODO: figure out max mapped size */
dev_set_drvdata(dev, gpu);
Because the current implementation is DT-based, this only works when the host platform has the DT support. The problem is that some host platforms does not provide DT-based clocks drivers, as a result, the driver rage quit. PLL hardwares are typically provided by the host platform, which is part of the entire clock tree. The PLL hardware provide clock pulse to the GPU core, but it's not belong to the GPU corei itself. PLL registers can be manipulated directly by the device driver. Hence, it may need dedicated clock driver. Add a the etnaviv_gpu_clk_get() function to group similar code blocks, which make it easier to call this function on the platform where it works. Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev> --- drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 53 ++++++++++++++++----------- 1 file changed, 32 insertions(+), 21 deletions(-)