diff mbox series

[v4,5/5] drm/msm/dsi: add a comment to explain pkt_per_line encoding

Message ID 20240524-msm-drm-dsc-dsi-video-upstream-4-v4-5-e61c05b403df@linaro.org (mailing list archive)
State New, archived
Headers show
Series Add DSC support to DSI video panel | expand

Commit Message

Jun Nie May 24, 2024, 1:18 p.m. UTC 
From: Jonathan Marek <jonathan@marek.ca>

Make it clear why the pkt_per_line value is being "divided by 2".

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 7252d36687e6..4768cff08381 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -885,7 +885,11 @@  static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
 	/* DSI_VIDEO_COMPRESSION_MODE & DSI_COMMAND_COMPRESSION_MODE
 	 * registers have similar offsets, so for below common code use
 	 * DSI_VIDEO_COMPRESSION_MODE_XXXX for setting bits
+	 *
+	 * pkt_per_line is log2 encoded, >>1 works for supported values (1,2,4)
 	 */
+	if (pkt_per_line > 4)
+		drm_warn_once(msm_host->dev, "pkt_per_line too big");
 	reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_PKT_PER_LINE(pkt_per_line >> 1);
 	reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_EOL_BYTE_NUM(eol_byte_num);
 	reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_EN;