diff mbox series

[17/18] ASoC: bcm2835-i2s: Use phys addresses for DAI DMA

Message ID 20240524182702.1317935-18-dave.stevenson@raspberrypi.com (mailing list archive)
State New, archived
Headers show
Series BCM2835 DMA mapping cleanups and fixes | expand

Commit Message

Dave Stevenson May 24, 2024, 6:27 p.m. UTC
From: Phil Elwell <phil@raspberrypi.com>

Contrary to what struct snd_dmaengine_dai_dma_data suggests, the
configuration of addresses of DMA slave interfaces should be done in
CPU physical addresses.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 sound/soc/bcm/bcm2835-i2s.c | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c
index 9bda6499e66e..2d0fe53245f0 100644
--- a/sound/soc/bcm/bcm2835-i2s.c
+++ b/sound/soc/bcm/bcm2835-i2s.c
@@ -30,7 +30,6 @@ 
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/of_address.h>
 #include <linux/slab.h>
 
 #include <sound/core.h>
@@ -830,8 +829,7 @@  static int bcm2835_i2s_probe(struct platform_device *pdev)
 	struct bcm2835_i2s_dev *dev;
 	int ret;
 	void __iomem *base;
-	const __be32 *addr;
-	dma_addr_t dma_base;
+	struct resource *res;
 
 	dev = devm_kzalloc(&pdev->dev, sizeof(*dev),
 			   GFP_KERNEL);
@@ -846,7 +844,7 @@  static int bcm2835_i2s_probe(struct platform_device *pdev)
 				     "could not get clk\n");
 
 	/* Request ioarea */
-	base = devm_platform_ioremap_resource(pdev, 0);
+	base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
@@ -855,19 +853,11 @@  static int bcm2835_i2s_probe(struct platform_device *pdev)
 	if (IS_ERR(dev->i2s_regmap))
 		return PTR_ERR(dev->i2s_regmap);
 
-	/* Set the DMA address - we have to parse DT ourselves */
-	addr = of_get_address(pdev->dev.of_node, 0, NULL, NULL);
-	if (!addr) {
-		dev_err(&pdev->dev, "could not get DMA-register address\n");
-		return -EINVAL;
-	}
-	dma_base = be32_to_cpup(addr);
-
 	dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr =
-		dma_base + BCM2835_I2S_FIFO_A_REG;
+		res->start + BCM2835_I2S_FIFO_A_REG;
 
 	dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].addr =
-		dma_base + BCM2835_I2S_FIFO_A_REG;
+		res->start + BCM2835_I2S_FIFO_A_REG;
 
 	/* Set the bus width */
 	dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr_width =