@@ -580,9 +580,9 @@ static int tc_pllupdate(struct tc_data *tc, unsigned int pllctrl)
return 0;
}
-static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
+static int tc_pxl_pll_calc(struct tc_data *tc, u32 refclk, u32 pixelclock,
+ int *out_best_pixelclock, u32 *out_pxl_pllparam)
{
- int ret;
int i_pre, best_pre = 1;
int i_post, best_post = 1;
int div, best_div = 1;
@@ -678,11 +678,6 @@ static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
if (best_mul == 128)
best_mul = 0;
- /* Power up PLL and switch to bypass */
- ret = regmap_write(tc->regmap, PXL_PLLCTRL, PLLBYP | PLLEN);
- if (ret)
- return ret;
-
pxl_pllparam = vco_hi << 24; /* For PLL VCO >= 300 MHz = 1 */
pxl_pllparam |= ext_div[best_pre] << 20; /* External Pre-divider */
pxl_pllparam |= ext_div[best_post] << 16; /* External Post-divider */
@@ -690,6 +685,29 @@ static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
pxl_pllparam |= best_div << 8; /* Divider for PLL RefClk */
pxl_pllparam |= best_mul; /* Multiplier for PLL */
+ if (out_best_pixelclock)
+ *out_best_pixelclock = best_pixelclock;
+
+ if (out_pxl_pllparam)
+ *out_pxl_pllparam = pxl_pllparam;
+
+ return 0;
+}
+
+static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
+{
+ u32 pxl_pllparam = 0;
+ int ret;
+
+ ret = tc_pxl_pll_calc(tc, refclk, pixelclock, NULL, &pxl_pllparam);
+ if (ret)
+ return ret;
+
+ /* Power up PLL and switch to bypass */
+ ret = regmap_write(tc->regmap, PXL_PLLCTRL, PLLBYP | PLLEN);
+ if (ret)
+ return ret;
+
ret = regmap_write(tc->regmap, PXL_PLLPARAM, pxl_pllparam);
if (ret)
return ret;
Split tc_pxl_pll_en() into tc_pxl_pll_calc() which does only Pixel PLL parameter calculation and tc_pxl_pll_en() which calls tc_pxl_pll_calc() and then configures the Pixel PLL register. This is a preparatory patch for further rework, where tc_pxl_pll_calc() will also be used to find out the exact clock frequency generated by the Pixel PLL. This frequency will be used as adjusted_mode clock frequency and passed down the display pipeline to obtain exactly this frequency on input into this bridge. The precise input frequency that matches the Pixel PLL frequency is important for this bridge, as if the frequencies do not match, the bridge does suffer VFIFO overruns or underruns. Signed-off-by: Marek Vasut <marex@denx.de> --- Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: dri-devel@lists.freedesktop.org Cc: kernel@dh-electronics.com --- drivers/gpu/drm/bridge/tc358767.c | 32 ++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-)