diff mbox series

[v3,01/12] dt-bindings: display: fsl-imx-drm: drop edid property support

Message ID 20240602-drm-imx-cleanup-v3-1-e549e2a43100@linaro.org (mailing list archive)
State New, archived
Headers show
Series drm/imx/ipuv3: switch LDB and parallel-display driver to use drm_bridge_connector | expand

Commit Message

Dmitry Baryshkov June 2, 2024, 12:04 p.m. UTC
None of the in-kernel DT files ever used edid override with the
fsl-imx-drm driver. In case the EDID needs to be specified manually, DRM
core allows one to either override it via the debugfs or to load it via
request_firmware by using DRM_LOAD_EDID_FIRMWARE. In all other cases
EDID and/or modes are to be provided as a part of the panel driver.

Drop the edid property from the fsl-imx-drm bindings.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt | 2 --
 1 file changed, 2 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
index 3c35338a2867..269b1ae2fca9 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
@@ -119,7 +119,6 @@  Optional properties:
 - interface-pix-fmt: How this display is connected to the
   display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
   and "lvds666".
-- edid: verbatim EDID data block describing attached display.
 - ddc: phandle describing the i2c bus handling the display data
   channel
 - port@[0-1]: Port nodes with endpoint definitions as defined in
@@ -131,7 +130,6 @@  example:
 
 disp0 {
 	compatible = "fsl,imx-parallel-display";
-	edid = [edid-data];
 	interface-pix-fmt = "rgb24";
 
 	port@0 {