diff mbox series

[v2,7/9] drm/msm/dpu: check for overflow in _dpu_crtc_setup_lm_bounds()

Message ID 20240603-dpu-mode-config-width-v2-7-16af520575a6@linaro.org (mailing list archive)
State New, archived
Headers show
Series drm/msm/dpu: be more friendly to X.org | expand

Commit Message

Dmitry Baryshkov June 2, 2024, 9:39 p.m. UTC
Check in _dpu_crtc_setup_lm_bounds() that CRTC width is not overflowing
LM requirements.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

Comments

Abhinav Kumar June 3, 2024, 8:57 p.m. UTC | #1
On 6/2/2024 2:39 PM, Dmitry Baryshkov wrote:
> Check in _dpu_crtc_setup_lm_bounds() that CRTC width is not overflowing
> LM requirements.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 15 ++++++++++++---
>   1 file changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index e3b1e5f55a92..c5e874a3656a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -711,12 +711,13 @@ void dpu_crtc_complete_commit(struct drm_crtc *crtc)
>   	_dpu_crtc_complete_flip(crtc);
>   }
>   
> -static void _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
> +static int _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
>   		struct drm_crtc_state *state)

Perhaps now we need to rename this to _dpu_crtc_setup_and_check_lm_bounds()?

Also, prior to this change, we never had a bounds check for each LM 
which we should have had . Does this qualify for a Fixes tag?

With those two questions addressed,

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

>   {
>   	struct dpu_crtc_state *cstate = to_dpu_crtc_state(state);
>   	struct drm_display_mode *adj_mode = &state->adjusted_mode;
>   	u32 crtc_split_width = adj_mode->hdisplay / cstate->num_mixers;
> +	struct dpu_kms *dpu_kms = _dpu_crtc_get_kms(crtc);
>   	int i;
>   
>   	for (i = 0; i < cstate->num_mixers; i++) {
> @@ -727,7 +728,12 @@ static void _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
>   		r->y2 = adj_mode->vdisplay;
>   
>   		trace_dpu_crtc_setup_lm_bounds(DRMID(crtc), i, r);
> +
> +		if (drm_rect_width(r) > dpu_kms->catalog->caps->max_mixer_width)
> +			return -E2BIG;
>   	}

> +
> +	return 0;
>   }
>   
>   static void _dpu_crtc_get_pcc_coeff(struct drm_crtc_state *state,
> @@ -1195,8 +1201,11 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
>   	if (crtc_state->active_changed)
>   		crtc_state->mode_changed = true;
>   
> -	if (cstate->num_mixers)
> -		_dpu_crtc_setup_lm_bounds(crtc, crtc_state);
> +	if (cstate->num_mixers) {
> +		rc = _dpu_crtc_setup_lm_bounds(crtc, crtc_state);
> +		if (rc)
> +			return rc;
> +	}
>   
>   	/* FIXME: move this to dpu_plane_atomic_check? */
>   	drm_atomic_crtc_state_for_each_plane_state(plane, pstate, crtc_state) {
>
Dmitry Baryshkov June 3, 2024, 9:16 p.m. UTC | #2
On Mon, 3 Jun 2024 at 23:57, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote:
>
>
>
> On 6/2/2024 2:39 PM, Dmitry Baryshkov wrote:
> > Check in _dpu_crtc_setup_lm_bounds() that CRTC width is not overflowing
> > LM requirements.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > ---
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 15 ++++++++++++---
> >   1 file changed, 12 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > index e3b1e5f55a92..c5e874a3656a 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > @@ -711,12 +711,13 @@ void dpu_crtc_complete_commit(struct drm_crtc *crtc)
> >       _dpu_crtc_complete_flip(crtc);
> >   }
> >
> > -static void _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
> > +static int _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
> >               struct drm_crtc_state *state)
>
> Perhaps now we need to rename this to _dpu_crtc_setup_and_check_lm_bounds()?

Ack, I'll rename it.

>
> Also, prior to this change, we never had a bounds check for each LM
> which we should have had . Does this qualify for a Fixes tag?

Probably no. We currently have a limit in the drm_mode_config, which
ensures that the CRTC isn't too wide.

>
> With those two questions addressed,
>
> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
>
> >   {
> >       struct dpu_crtc_state *cstate = to_dpu_crtc_state(state);
> >       struct drm_display_mode *adj_mode = &state->adjusted_mode;
> >       u32 crtc_split_width = adj_mode->hdisplay / cstate->num_mixers;
> > +     struct dpu_kms *dpu_kms = _dpu_crtc_get_kms(crtc);
> >       int i;
> >
> >       for (i = 0; i < cstate->num_mixers; i++) {
> > @@ -727,7 +728,12 @@ static void _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
> >               r->y2 = adj_mode->vdisplay;
> >
> >               trace_dpu_crtc_setup_lm_bounds(DRMID(crtc), i, r);
> > +
> > +             if (drm_rect_width(r) > dpu_kms->catalog->caps->max_mixer_width)
> > +                     return -E2BIG;
> >       }
>
> > +
> > +     return 0;
> >   }
> >
> >   static void _dpu_crtc_get_pcc_coeff(struct drm_crtc_state *state,
> > @@ -1195,8 +1201,11 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
> >       if (crtc_state->active_changed)
> >               crtc_state->mode_changed = true;
> >
> > -     if (cstate->num_mixers)
> > -             _dpu_crtc_setup_lm_bounds(crtc, crtc_state);
> > +     if (cstate->num_mixers) {
> > +             rc = _dpu_crtc_setup_lm_bounds(crtc, crtc_state);
> > +             if (rc)
> > +                     return rc;
> > +     }
> >
> >       /* FIXME: move this to dpu_plane_atomic_check? */
> >       drm_atomic_crtc_state_for_each_plane_state(plane, pstate, crtc_state) {
> >
Abhinav Kumar June 3, 2024, 9:24 p.m. UTC | #3
On 6/3/2024 2:16 PM, Dmitry Baryshkov wrote:
> On Mon, 3 Jun 2024 at 23:57, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote:
>>
>>
>>
>> On 6/2/2024 2:39 PM, Dmitry Baryshkov wrote:
>>> Check in _dpu_crtc_setup_lm_bounds() that CRTC width is not overflowing
>>> LM requirements.
>>>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>>> ---
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 15 ++++++++++++---
>>>    1 file changed, 12 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>>> index e3b1e5f55a92..c5e874a3656a 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>>> @@ -711,12 +711,13 @@ void dpu_crtc_complete_commit(struct drm_crtc *crtc)
>>>        _dpu_crtc_complete_flip(crtc);
>>>    }
>>>
>>> -static void _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
>>> +static int _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
>>>                struct drm_crtc_state *state)
>>
>> Perhaps now we need to rename this to _dpu_crtc_setup_and_check_lm_bounds()?
> 
> Ack, I'll rename it.
> 
>>
>> Also, prior to this change, we never had a bounds check for each LM
>> which we should have had . Does this qualify for a Fixes tag?
> 
> Probably no. We currently have a limit in the drm_mode_config, which
> ensures that the CRTC isn't too wide.
> 

The limit in drm_mode_config is to ensure we will not go beyond 
2*max_mixer_width for the mode as we support only upto 2 LMs.

This check is making sure that even for the single LM, we do not go 
beyond the max_mixer_width which is valid imo.

>>
>> With those two questions addressed,
>>
>> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
>>
>>>    {
>>>        struct dpu_crtc_state *cstate = to_dpu_crtc_state(state);
>>>        struct drm_display_mode *adj_mode = &state->adjusted_mode;
>>>        u32 crtc_split_width = adj_mode->hdisplay / cstate->num_mixers;
>>> +     struct dpu_kms *dpu_kms = _dpu_crtc_get_kms(crtc);
>>>        int i;
>>>
>>>        for (i = 0; i < cstate->num_mixers; i++) {
>>> @@ -727,7 +728,12 @@ static void _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
>>>                r->y2 = adj_mode->vdisplay;
>>>
>>>                trace_dpu_crtc_setup_lm_bounds(DRMID(crtc), i, r);
>>> +
>>> +             if (drm_rect_width(r) > dpu_kms->catalog->caps->max_mixer_width)
>>> +                     return -E2BIG;
>>>        }
>>
>>> +
>>> +     return 0;
>>>    }
>>>
>>>    static void _dpu_crtc_get_pcc_coeff(struct drm_crtc_state *state,
>>> @@ -1195,8 +1201,11 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
>>>        if (crtc_state->active_changed)
>>>                crtc_state->mode_changed = true;
>>>
>>> -     if (cstate->num_mixers)
>>> -             _dpu_crtc_setup_lm_bounds(crtc, crtc_state);
>>> +     if (cstate->num_mixers) {
>>> +             rc = _dpu_crtc_setup_lm_bounds(crtc, crtc_state);
>>> +             if (rc)
>>> +                     return rc;
>>> +     }
>>>
>>>        /* FIXME: move this to dpu_plane_atomic_check? */
>>>        drm_atomic_crtc_state_for_each_plane_state(plane, pstate, crtc_state) {
>>>
> 
> 
>
Dmitry Baryshkov June 3, 2024, 9:40 p.m. UTC | #4
On Mon, Jun 03, 2024 at 02:24:27PM -0700, Abhinav Kumar wrote:
> 
> 
> On 6/3/2024 2:16 PM, Dmitry Baryshkov wrote:
> > On Mon, 3 Jun 2024 at 23:57, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote:
> > > 
> > > 
> > > 
> > > On 6/2/2024 2:39 PM, Dmitry Baryshkov wrote:
> > > > Check in _dpu_crtc_setup_lm_bounds() that CRTC width is not overflowing
> > > > LM requirements.
> > > > 
> > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > > > ---
> > > >    drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 15 ++++++++++++---
> > > >    1 file changed, 12 insertions(+), 3 deletions(-)
> > > > 
> > > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > > > index e3b1e5f55a92..c5e874a3656a 100644
> > > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > > > @@ -711,12 +711,13 @@ void dpu_crtc_complete_commit(struct drm_crtc *crtc)
> > > >        _dpu_crtc_complete_flip(crtc);
> > > >    }
> > > > 
> > > > -static void _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
> > > > +static int _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
> > > >                struct drm_crtc_state *state)
> > > 
> > > Perhaps now we need to rename this to _dpu_crtc_setup_and_check_lm_bounds()?
> > 
> > Ack, I'll rename it.
> > 
> > > 
> > > Also, prior to this change, we never had a bounds check for each LM
> > > which we should have had . Does this qualify for a Fixes tag?
> > 
> > Probably no. We currently have a limit in the drm_mode_config, which
> > ensures that the CRTC isn't too wide.
> > 
> 
> The limit in drm_mode_config is to ensure we will not go beyond
> 2*max_mixer_width for the mode as we support only upto 2 LMs.
> 
> This check is making sure that even for the single LM, we do not go beyond
> the max_mixer_width which is valid imo.

For the case where 2*LM mode is not possible? Yes, it seems to be a
valid case. But in such case I'd prefer to rework this patch and pull it
to the top of the series. I'll take a look.

> 
> > > 
> > > With those two questions addressed,
> > > 
> > > Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
> > > 
> > > >    {
> > > >        struct dpu_crtc_state *cstate = to_dpu_crtc_state(state);
> > > >        struct drm_display_mode *adj_mode = &state->adjusted_mode;
> > > >        u32 crtc_split_width = adj_mode->hdisplay / cstate->num_mixers;
> > > > +     struct dpu_kms *dpu_kms = _dpu_crtc_get_kms(crtc);
> > > >        int i;
> > > > 
> > > >        for (i = 0; i < cstate->num_mixers; i++) {
> > > > @@ -727,7 +728,12 @@ static void _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
> > > >                r->y2 = adj_mode->vdisplay;
> > > > 
> > > >                trace_dpu_crtc_setup_lm_bounds(DRMID(crtc), i, r);
> > > > +
> > > > +             if (drm_rect_width(r) > dpu_kms->catalog->caps->max_mixer_width)
> > > > +                     return -E2BIG;
> > > >        }
> > > 
> > > > +
> > > > +     return 0;
> > > >    }
> > > > 
> > > >    static void _dpu_crtc_get_pcc_coeff(struct drm_crtc_state *state,
> > > > @@ -1195,8 +1201,11 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
> > > >        if (crtc_state->active_changed)
> > > >                crtc_state->mode_changed = true;
> > > > 
> > > > -     if (cstate->num_mixers)
> > > > -             _dpu_crtc_setup_lm_bounds(crtc, crtc_state);
> > > > +     if (cstate->num_mixers) {
> > > > +             rc = _dpu_crtc_setup_lm_bounds(crtc, crtc_state);
> > > > +             if (rc)
> > > > +                     return rc;
> > > > +     }
> > > > 
> > > >        /* FIXME: move this to dpu_plane_atomic_check? */
> > > >        drm_atomic_crtc_state_for_each_plane_state(plane, pstate, crtc_state) {
> > > > 
> > 
> > 
> >
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index e3b1e5f55a92..c5e874a3656a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -711,12 +711,13 @@  void dpu_crtc_complete_commit(struct drm_crtc *crtc)
 	_dpu_crtc_complete_flip(crtc);
 }
 
-static void _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
+static int _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
 		struct drm_crtc_state *state)
 {
 	struct dpu_crtc_state *cstate = to_dpu_crtc_state(state);
 	struct drm_display_mode *adj_mode = &state->adjusted_mode;
 	u32 crtc_split_width = adj_mode->hdisplay / cstate->num_mixers;
+	struct dpu_kms *dpu_kms = _dpu_crtc_get_kms(crtc);
 	int i;
 
 	for (i = 0; i < cstate->num_mixers; i++) {
@@ -727,7 +728,12 @@  static void _dpu_crtc_setup_lm_bounds(struct drm_crtc *crtc,
 		r->y2 = adj_mode->vdisplay;
 
 		trace_dpu_crtc_setup_lm_bounds(DRMID(crtc), i, r);
+
+		if (drm_rect_width(r) > dpu_kms->catalog->caps->max_mixer_width)
+			return -E2BIG;
 	}
+
+	return 0;
 }
 
 static void _dpu_crtc_get_pcc_coeff(struct drm_crtc_state *state,
@@ -1195,8 +1201,11 @@  static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
 	if (crtc_state->active_changed)
 		crtc_state->mode_changed = true;
 
-	if (cstate->num_mixers)
-		_dpu_crtc_setup_lm_bounds(crtc, crtc_state);
+	if (cstate->num_mixers) {
+		rc = _dpu_crtc_setup_lm_bounds(crtc, crtc_state);
+		if (rc)
+			return rc;
+	}
 
 	/* FIXME: move this to dpu_plane_atomic_check? */
 	drm_atomic_crtc_state_for_each_plane_state(plane, pstate, crtc_state) {