diff mbox series

[v2,11/14] drm/bridge: analogix_dp: don't wait for PLL lock too early

Message ID 20240619182200.3752465-11-l.stach@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series [v2,01/14] drm/bridge: analogix_dp: remove unused platform power_on_end callback | expand

Commit Message

Lucas Stach June 19, 2024, 6:21 p.m. UTC
The PLL will be reconfigured later, which may cause it to go out of lock
anyway, so there is no point in waiting for the PLL to lock here. Instead
we can continue execution of the link setup, which will properly set the
PLL parameters and will wait for the PLL to lock at the appropriate times.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de> (rk3288-veyron and rk3399-gru)
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index d267cf05cbca..e9c643a8b6fc 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -356,7 +356,6 @@  void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
 int analogix_dp_init_analog_func(struct analogix_dp_device *dp)
 {
 	u32 reg;
-	int timeout_loop = 0;
 
 	analogix_dp_set_analog_power_down(dp, POWER_ALL, 0);
 
@@ -368,18 +367,7 @@  int analogix_dp_init_analog_func(struct analogix_dp_device *dp)
 	writel(reg, dp->reg_base + ANALOGIX_DP_DEBUG_CTL);
 
 	/* Power up PLL */
-	if (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
-		analogix_dp_set_pll_power_down(dp, 0);
-
-		while (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
-			timeout_loop++;
-			if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
-				dev_err(dp->dev, "failed to get pll lock status\n");
-				return -ETIMEDOUT;
-			}
-			usleep_range(10, 20);
-		}
-	}
+	analogix_dp_set_pll_power_down(dp, 0);
 
 	/* Enable Serdes FIFO function and Link symbol clock domain module */
 	reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_2);