diff mbox series

[06/31] drm/vc4: Set AXI panic modes for the HVS

Message ID 20240620154632.4125308-7-dave.stevenson@raspberrypi.com (mailing list archive)
State New, archived
Headers show
Series Preparatory patches for BCM2712 (Pi5) support | expand

Commit Message

Dave Stevenson June 20, 2024, 3:46 p.m. UTC 
The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.

With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/gpu/drm/vc4/vc4_hvs.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index 04af672caacb..267c9fde7362 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -951,6 +951,17 @@  static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
 			      SCALER_DISPCTRL_SCLEIRQ);
 
 
+	/* Set AXI panic mode.
+	 * VC4 panics when < 2 lines in FIFO.
+	 * VC5 panics when less than 1 line in the FIFO.
+	 */
+	dispctrl &= ~(SCALER_DISPCTRL_PANIC0_MASK |
+		      SCALER_DISPCTRL_PANIC1_MASK |
+		      SCALER_DISPCTRL_PANIC2_MASK);
+	dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC0);
+	dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC1);
+	dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC2);
+
 	/* Set AXI panic mode.
 	 * VC4 panics when < 2 lines in FIFO.
 	 * VC5 panics when less than 1 line in the FIFO.