diff mbox series

drm/fbdev-dma: Fix framebuffer mode for big endian devices

Message ID 20240702121737.522878-1-thuth@redhat.com (mailing list archive)
State New
Headers show
Series drm/fbdev-dma: Fix framebuffer mode for big endian devices | expand

Commit Message

Thomas Huth July 2, 2024, 12:17 p.m. UTC
The drm_mode_legacy_fb_format() function only generates formats suitable
for little endian devices. switch to drm_driver_legacy_fb_format() here
instead to take the device endianness into consideration, too.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 Note: Patch has only been compile-tested since I lack an environment
       for testing it. But it's the same fix as I required for the
       drm_mode_legacy_fb_format() in drm_fbdev_generic.c / drm_fbdev_ttm.c
       so I think this should be fine.

 drivers/gpu/drm/drm_fbdev_dma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Thomas Zimmermann July 2, 2024, 12:29 p.m. UTC | #1
Hi

Am 02.07.24 um 14:17 schrieb Thomas Huth:
> The drm_mode_legacy_fb_format() function only generates formats suitable
> for little endian devices. switch to drm_driver_legacy_fb_format() here
> instead to take the device endianness into consideration, too.
>
> Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
> Signed-off-by: Thomas Huth <thuth@redhat.com>

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>

Thank you for taking the time to make the patch for fbdev-dma. I'll take 
care of merging both patches into the correct branches.

Best regards
Thomas

> ---
>   Note: Patch has only been compile-tested since I lack an environment
>         for testing it. But it's the same fix as I required for the
>         drm_mode_legacy_fb_format() in drm_fbdev_generic.c / drm_fbdev_ttm.c
>         so I think this should be fine.
>
>   drivers/gpu/drm/drm_fbdev_dma.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_fbdev_dma.c b/drivers/gpu/drm/drm_fbdev_dma.c
> index 97ef6300d47e..fdef4a2f883f 100644
> --- a/drivers/gpu/drm/drm_fbdev_dma.c
> +++ b/drivers/gpu/drm/drm_fbdev_dma.c
> @@ -101,7 +101,8 @@ static int drm_fbdev_dma_helper_fb_probe(struct drm_fb_helper *fb_helper,
>   		    sizes->surface_width, sizes->surface_height,
>   		    sizes->surface_bpp);
>   
> -	format = drm_mode_legacy_fb_format(sizes->surface_bpp, sizes->surface_depth);
> +	format = drm_driver_legacy_fb_format(dev, sizes->surface_bpp,
> +					     sizes->surface_depth);
>   	buffer = drm_client_framebuffer_create(client, sizes->surface_width,
>   					       sizes->surface_height, format);
>   	if (IS_ERR(buffer))
Javier Martinez Canillas July 2, 2024, 12:34 p.m. UTC | #2
Thomas Huth <thuth@redhat.com> writes:

Hello Thomas,

> The drm_mode_legacy_fb_format() function only generates formats suitable
> for little endian devices. switch to drm_driver_legacy_fb_format() here
> instead to take the device endianness into consideration, too.
>
> Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> ---
>  Note: Patch has only been compile-tested since I lack an environment
>        for testing it. But it's the same fix as I required for the
>        drm_mode_legacy_fb_format() in drm_fbdev_generic.c / drm_fbdev_ttm.c
>        so I think this should be fine.
>
>  drivers/gpu/drm/drm_fbdev_dma.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_fbdev_dma.c b/drivers/gpu/drm/drm_fbdev_dma.c
> index 97ef6300d47e..fdef4a2f883f 100644
> --- a/drivers/gpu/drm/drm_fbdev_dma.c
> +++ b/drivers/gpu/drm/drm_fbdev_dma.c
> @@ -101,7 +101,8 @@ static int drm_fbdev_dma_helper_fb_probe(struct drm_fb_helper *fb_helper,
>  		    sizes->surface_width, sizes->surface_height,
>  		    sizes->surface_bpp);
>  
> -	format = drm_mode_legacy_fb_format(sizes->surface_bpp, sizes->surface_depth);
> +	format = drm_driver_legacy_fb_format(dev, sizes->surface_bpp,
> +					     sizes->surface_depth);
>  	buffer = drm_client_framebuffer_create(client, sizes->surface_width,
>  					       sizes->surface_height, format);
>  	if (IS_ERR(buffer))

Makes sense to me.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/drm_fbdev_dma.c b/drivers/gpu/drm/drm_fbdev_dma.c
index 97ef6300d47e..fdef4a2f883f 100644
--- a/drivers/gpu/drm/drm_fbdev_dma.c
+++ b/drivers/gpu/drm/drm_fbdev_dma.c
@@ -101,7 +101,8 @@  static int drm_fbdev_dma_helper_fb_probe(struct drm_fb_helper *fb_helper,
 		    sizes->surface_width, sizes->surface_height,
 		    sizes->surface_bpp);
 
-	format = drm_mode_legacy_fb_format(sizes->surface_bpp, sizes->surface_depth);
+	format = drm_driver_legacy_fb_format(dev, sizes->surface_bpp,
+					     sizes->surface_depth);
 	buffer = drm_client_framebuffer_create(client, sizes->surface_width,
 					       sizes->surface_height, format);
 	if (IS_ERR(buffer))