| Message ID | 20240815003417.1175506-8-swboyd@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | platform/chrome: Add DT USB/DP muxing/topology support | expand |
On Wed, 14 Aug 2024, Stephen Boyd wrote: > Add a DT graph binding to google,cros-ec-typec so that it can combine > DisplayPort (DP) and USB SuperSpeed (SS) data into a USB type-c endpoint > that is connected to the usb-c-connector node's SS endpoint. This also > allows us to connect the DP and USB nodes in the graph to the USB type-c > connectors, providing the full picture of the USB type-c data flows in > the system. > > Allow there to be multiple typec nodes underneath the EC node so that > one DT graph exists per DP bridge. The EC is actually controlling TCPCs > and redrivers that combine the DP and USB signals together so this more > accurately reflects the hardware design without introducing yet another > DT node underneath the EC for USB type-c. > > If the type-c ports are being shared between a single DP controller then > the ports need to know about each other and determine a policy to drive > DP to one type-c port. If the type-c ports each have their own dedicated > DP controller then they're able to operate independently and enter/exit > DP altmode independently as well. We can't connect the DP controller's > endpoint to one usb-c-connector port@1 endpoint and the USB controller's > endpoint to another usb-c-connector port@1 endpoint either because the > DP muxing case would have DP connected to two usb-c-connector endpoints > which the graph binding doesn't support. > > Therefore, one typec node is required per the capabilities of the type-c > port(s) being managed. This also lets us indicate which type-c ports the > DP controller is wired to. For example, if DP was connected to ports 0 > and 2, while port 1 was connected to another DP controller we wouldn't > be able to implement that without having some other DT property to > indicate which output ports are connected to the DP endpoint. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > Cc: Conor Dooley <conor+dt@kernel.org> > Cc: Lee Jones <lee@kernel.org> > Cc: Benson Leung <bleung@chromium.org> > Cc: Guenter Roeck <groeck@chromium.org> > Cc: Prashant Malani <pmalani@chromium.org> > Cc: Tzung-Bi Shih <tzungbi@kernel.org> > Cc: <devicetree@vger.kernel.org> > Cc: <chrome-platform@lists.linux.dev> > Cc: Pin-yen Lin <treapking@chromium.org> > Signed-off-by: Stephen Boyd <swboyd@chromium.org> Needs to be accompanied by a DT review: Acked-by: Lee Jones <lee@kernel.org> > --- > .../bindings/chrome/google,cros-ec-typec.yaml | 260 ++++++++++++++++++ > .../bindings/mfd/google,cros-ec.yaml | 7 +- > 2 files changed, 264 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml > index 9f9816fbecbc..1238adfbea21 100644 > --- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml > +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml > @@ -26,6 +26,137 @@ properties: > '#size-cells': > const: 0 > > + mux-gpios: > + description: GPIOs indicating which way the DP mux is steered > + maxItems: 1 > + > + no-hpd: > + description: Indicates this endpoint doesn't signal HPD for DisplayPort > + type: boolean > + > + orientation: > + description: > + Indicates this endpoint assigns lanes based on altmode and > + type-c port orientation > + type: boolean > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + description: > + Input port to receive DisplayPort (DP) data > + unevaluatedProperties: false > + > + properties: > + endpoint@0: > + $ref: /schemas/graph.yaml#/$defs/endpoint-base > + description: DisplayPort data for the type-c port(s) > + unevaluatedProperties: false > + properties: > + data-lanes: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: | > + An array of physical DP data lane indexes > + - 0 is DP ML0 lane > + - 1 is DP ML1 lane > + - 2 is DP ML2 lane > + - 3 is DP ML3 lane > + oneOf: > + - items: > + - const: 0 > + - const: 1 > + - items: > + - const: 0 > + - const: 1 > + - const: 2 > + - const: 3 > + > + required: > + - endpoint@0 > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port to receive USB SuperSpeed (SS) data > + patternProperties: > + "^endpoint@([0-8])$": > + $ref: /schemas/graph.yaml#/properties/endpoint > + > + anyOf: > + - required: > + - endpoint@0 > + - required: > + - endpoint@1 > + - required: > + - endpoint@2 > + - required: > + - endpoint@3 > + - required: > + - endpoint@4 > + - required: > + - endpoint@5 > + - required: > + - endpoint@6 > + - required: > + - endpoint@7 > + - required: > + - endpoint@8 > + > + port@2: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: Output ports for combined DP and USB SS data > + patternProperties: > + "^endpoint@([0-8])$": > + $ref: /schemas/graph.yaml#/$defs/endpoint-base > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: | > + An array of physical USB Type-C data lane indexes. > + - 0 is SSRX1 lane > + - 1 is SSTX1 lane > + - 2 is SSTX2 lane > + - 3 is SSRX2 lane > + minItems: 4 > + maxItems: 4 > + items: > + maximum: 3 > + > + anyOf: > + - required: > + - endpoint@0 > + - required: > + - endpoint@1 > + - required: > + - endpoint@2 > + - required: > + - endpoint@3 > + - required: > + - endpoint@4 > + - required: > + - endpoint@5 > + - required: > + - endpoint@6 > + - required: > + - endpoint@7 > + - required: > + - endpoint@8 > + > + required: > + - port@2 > + anyOf: > + - required: > + - port@0 > + - required: > + - port@1 > + > patternProperties: > '^connector@[0-9a-f]+$': > $ref: /schemas/connector/usb-connector.yaml# > @@ -35,6 +166,38 @@ patternProperties: > required: > - compatible > > +allOf: > + - if: > + properties: > + no-hpd: true > + required: > + - no-hpd > + then: > + properties: > + ports: > + required: > + - port@0 > + - if: > + properties: > + mux-gpios: true > + required: > + - mux-gpios > + then: > + properties: > + ports: > + required: > + - port@0 > + - if: > + properties: > + orientation: true > + required: > + - orientation > + then: > + properties: > + ports: > + required: > + - port@0 > + > additionalProperties: false > > examples: > @@ -60,6 +223,103 @@ examples: > power-role = "dual"; > data-role = "dual"; > try-power-role = "source"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + usb_c0_hs: endpoint { > + remote-endpoint = <&usb_hub_dfp3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + usb_c0_ss: endpoint { > + remote-endpoint = <&cros_typec_c0_ss>; > + }; > + }; > + }; > + }; > + > + connector@1 { > + compatible = "usb-c-connector"; > + reg = <1>; > + power-role = "dual"; > + data-role = "dual"; > + try-power-role = "source"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + usb_c1_hs: endpoint { > + remote-endpoint = <&usb_hub_dfp2_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + usb_c1_ss: endpoint { > + remote-endpoint = <&cros_typec_c1_ss>; > + }; > + }; > + }; > + }; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + dp_in: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&dp_phy>; > + data-lanes = <0 1>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + usb_in_0: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&usb_ss_0_out>; > + }; > + > + usb_in_1: endpoint@1 { > + reg = <1>; > + remote-endpoint = <&usb_ss_1_out>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + cros_typec_c0_ss: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&usb_c0_ss>; > + data-lanes = <0 1 2 3>; > + }; > + > + cros_typec_c1_ss: endpoint@1 { > + reg = <1>; > + remote-endpoint = <&usb_c1_ss>; > + data-lanes = <2 3 0 1>; > + }; > + }; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml > index aac8819bd00b..c860eb7ed3f5 100644 > --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml > +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml > @@ -98,9 +98,6 @@ properties: > > gpio-controller: true > > - typec: > - $ref: /schemas/chrome/google,cros-ec-typec.yaml# > - > ec-pwm: > $ref: /schemas/pwm/google,cros-ec-pwm.yaml# > deprecated: true > @@ -166,6 +163,10 @@ patternProperties: > type: object > $ref: /schemas/extcon/extcon-usbc-cros-ec.yaml# > > + "^typec(-[0-9])*$": > + type: object > + $ref: /schemas/chrome/google,cros-ec-typec.yaml# > + > required: > - compatible > > -- > https://chromeos.dev >
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml index 9f9816fbecbc..1238adfbea21 100644 --- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml @@ -26,6 +26,137 @@ properties: '#size-cells': const: 0 + mux-gpios: + description: GPIOs indicating which way the DP mux is steered + maxItems: 1 + + no-hpd: + description: Indicates this endpoint doesn't signal HPD for DisplayPort + type: boolean + + orientation: + description: + Indicates this endpoint assigns lanes based on altmode and + type-c port orientation + type: boolean + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Input port to receive DisplayPort (DP) data + unevaluatedProperties: false + + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + description: DisplayPort data for the type-c port(s) + unevaluatedProperties: false + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + An array of physical DP data lane indexes + - 0 is DP ML0 lane + - 1 is DP ML1 lane + - 2 is DP ML2 lane + - 3 is DP ML3 lane + oneOf: + - items: + - const: 0 + - const: 1 + - items: + - const: 0 + - const: 1 + - const: 2 + - const: 3 + + required: + - endpoint@0 + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port to receive USB SuperSpeed (SS) data + patternProperties: + "^endpoint@([0-8])$": + $ref: /schemas/graph.yaml#/properties/endpoint + + anyOf: + - required: + - endpoint@0 + - required: + - endpoint@1 + - required: + - endpoint@2 + - required: + - endpoint@3 + - required: + - endpoint@4 + - required: + - endpoint@5 + - required: + - endpoint@6 + - required: + - endpoint@7 + - required: + - endpoint@8 + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Output ports for combined DP and USB SS data + patternProperties: + "^endpoint@([0-8])$": + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + An array of physical USB Type-C data lane indexes. + - 0 is SSRX1 lane + - 1 is SSTX1 lane + - 2 is SSTX2 lane + - 3 is SSRX2 lane + minItems: 4 + maxItems: 4 + items: + maximum: 3 + + anyOf: + - required: + - endpoint@0 + - required: + - endpoint@1 + - required: + - endpoint@2 + - required: + - endpoint@3 + - required: + - endpoint@4 + - required: + - endpoint@5 + - required: + - endpoint@6 + - required: + - endpoint@7 + - required: + - endpoint@8 + + required: + - port@2 + anyOf: + - required: + - port@0 + - required: + - port@1 + patternProperties: '^connector@[0-9a-f]+$': $ref: /schemas/connector/usb-connector.yaml# @@ -35,6 +166,38 @@ patternProperties: required: - compatible +allOf: + - if: + properties: + no-hpd: true + required: + - no-hpd + then: + properties: + ports: + required: + - port@0 + - if: + properties: + mux-gpios: true + required: + - mux-gpios + then: + properties: + ports: + required: + - port@0 + - if: + properties: + orientation: true + required: + - orientation + then: + properties: + ports: + required: + - port@0 + additionalProperties: false examples: @@ -60,6 +223,103 @@ examples: power-role = "dual"; data-role = "dual"; try-power-role = "source"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_c0_hs: endpoint { + remote-endpoint = <&usb_hub_dfp3_hs>; + }; + }; + + port@1 { + reg = <1>; + usb_c0_ss: endpoint { + remote-endpoint = <&cros_typec_c0_ss>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + try-power-role = "source"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_c1_hs: endpoint { + remote-endpoint = <&usb_hub_dfp2_hs>; + }; + }; + + port@1 { + reg = <1>; + usb_c1_ss: endpoint { + remote-endpoint = <&cros_typec_c1_ss>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + dp_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&dp_phy>; + data-lanes = <0 1>; + }; + }; + + port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usb_in_0: endpoint@0 { + reg = <0>; + remote-endpoint = <&usb_ss_0_out>; + }; + + usb_in_1: endpoint@1 { + reg = <1>; + remote-endpoint = <&usb_ss_1_out>; + }; + }; + + port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + cros_typec_c0_ss: endpoint@0 { + reg = <0>; + remote-endpoint = <&usb_c0_ss>; + data-lanes = <0 1 2 3>; + }; + + cros_typec_c1_ss: endpoint@1 { + reg = <1>; + remote-endpoint = <&usb_c1_ss>; + data-lanes = <2 3 0 1>; + }; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index aac8819bd00b..c860eb7ed3f5 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -98,9 +98,6 @@ properties: gpio-controller: true - typec: - $ref: /schemas/chrome/google,cros-ec-typec.yaml# - ec-pwm: $ref: /schemas/pwm/google,cros-ec-pwm.yaml# deprecated: true @@ -166,6 +163,10 @@ patternProperties: type: object $ref: /schemas/extcon/extcon-usbc-cros-ec.yaml# + "^typec(-[0-9])*$": + type: object + $ref: /schemas/chrome/google,cros-ec-typec.yaml# + required: - compatible
Add a DT graph binding to google,cros-ec-typec so that it can combine DisplayPort (DP) and USB SuperSpeed (SS) data into a USB type-c endpoint that is connected to the usb-c-connector node's SS endpoint. This also allows us to connect the DP and USB nodes in the graph to the USB type-c connectors, providing the full picture of the USB type-c data flows in the system. Allow there to be multiple typec nodes underneath the EC node so that one DT graph exists per DP bridge. The EC is actually controlling TCPCs and redrivers that combine the DP and USB signals together so this more accurately reflects the hardware design without introducing yet another DT node underneath the EC for USB type-c. If the type-c ports are being shared between a single DP controller then the ports need to know about each other and determine a policy to drive DP to one type-c port. If the type-c ports each have their own dedicated DP controller then they're able to operate independently and enter/exit DP altmode independently as well. We can't connect the DP controller's endpoint to one usb-c-connector port@1 endpoint and the USB controller's endpoint to another usb-c-connector port@1 endpoint either because the DP muxing case would have DP connected to two usb-c-connector endpoints which the graph binding doesn't support. Therefore, one typec node is required per the capabilities of the type-c port(s) being managed. This also lets us indicate which type-c ports the DP controller is wired to. For example, if DP was connected to ports 0 and 2, while port 1 was connected to another DP controller we wouldn't be able to implement that without having some other DT property to indicate which output ports are connected to the DP endpoint. Cc: Rob Herring <robh+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Conor Dooley <conor+dt@kernel.org> Cc: Lee Jones <lee@kernel.org> Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Prashant Malani <pmalani@chromium.org> Cc: Tzung-Bi Shih <tzungbi@kernel.org> Cc: <devicetree@vger.kernel.org> Cc: <chrome-platform@lists.linux.dev> Cc: Pin-yen Lin <treapking@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> --- .../bindings/chrome/google,cros-ec-typec.yaml | 260 ++++++++++++++++++ .../bindings/mfd/google,cros-ec.yaml | 7 +- 2 files changed, 264 insertions(+), 3 deletions(-)