@@ -2769,6 +2769,41 @@ static const struct panel_desc innolux_zj070na_01p = {
},
};
+static const struct display_timing jdi_tx26d202vm0bwa_timing = {
+ .pixelclock = { 151820000, 156720000, 159780000 },
+ .hactive = { 1920, 1920, 1920 },
+ .hfront_porch = { 76, 100, 112 },
+ .hback_porch = { 74, 100, 112 },
+ .hsync_len = { 30, 30, 30 },
+ .vactive = { 1200, 1200, 1200},
+ .vfront_porch = { 3, 5, 10 },
+ .vback_porch = { 2, 5, 10 },
+ .vsync_len = { 5, 5, 5 },
+ .flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc jdi_tx26d202vm0bwa = {
+ .timings = &jdi_tx26d202vm0bwa_timing,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 217,
+ .height = 136,
+ },
+ .delay = {
+ /*
+ * The panel spec recommends one second delay to the below
+ * items. However, it's a bit too long in pratice. Based on
+ * tests, it turns out 100 milliseconds is fine.
+ */
+ .prepare = 100,
+ .enable = 100,
+ .unprepare = 100,
+ .disable = 100,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+};
+
static const struct display_timing koe_tx14d24vm1bpa_timing = {
.pixelclock = { 5580000, 5850000, 6200000 },
.hactive = { 320, 320, 320 },
@@ -4829,6 +4864,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "innolux,zj070na-01p",
.data = &innolux_zj070na_01p,
+ }, {
+ .compatible = "jdi,tx26d202vm0bwa",
+ .data = &jdi_tx26d202vm0bwa,
}, {
.compatible = "koe,tx14d24vm1bpa",
.data = &koe_tx14d24vm1bpa,