@@ -2,15 +2,13 @@
#include <linux/fb.h>
-#include <drm/drm_crtc_helper.h>
#include <drm/drm_drv.h>
+#include <drm/drm_fbdev_dma.h>
#include <drm/drm_fb_dma_helper.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_framebuffer.h>
#include <drm/drm_gem_dma_helper.h>
-#include <drm/drm_fbdev_dma.h>
-
/*
* struct fb_ops
*/
@@ -84,12 +82,6 @@ static const struct fb_ops drm_fbdev_dma_fb_ops = {
* struct drm_fb_helper
*/
-static int drm_fbdev_dma_helper_fb_probe(struct drm_fb_helper *fb_helper,
- struct drm_fb_helper_surface_size *sizes)
-{
- return drm_fbdev_dma_driver_fbdev_probe(fb_helper, sizes);
-}
-
static int drm_fbdev_dma_helper_fb_dirty(struct drm_fb_helper *helper,
struct drm_clip_rect *clip)
{
@@ -110,7 +102,6 @@ static int drm_fbdev_dma_helper_fb_dirty(struct drm_fb_helper *helper,
}
static const struct drm_fb_helper_funcs drm_fbdev_dma_helper_funcs = {
- .fb_probe = drm_fbdev_dma_helper_fb_probe,
.fb_dirty = drm_fbdev_dma_helper_fb_dirty,
};
@@ -201,112 +192,3 @@ int drm_fbdev_dma_driver_fbdev_probe(struct drm_fb_helper *fb_helper,
return ret;
}
EXPORT_SYMBOL(drm_fbdev_dma_driver_fbdev_probe);
-
-/*
- * struct drm_client_funcs
- */
-
-static void drm_fbdev_dma_client_unregister(struct drm_client_dev *client)
-{
- struct drm_fb_helper *fb_helper = drm_fb_helper_from_client(client);
-
- if (fb_helper->info) {
- drm_fb_helper_unregister_info(fb_helper);
- } else {
- drm_client_release(&fb_helper->client);
- drm_fb_helper_unprepare(fb_helper);
- kfree(fb_helper);
- }
-}
-
-static int drm_fbdev_dma_client_restore(struct drm_client_dev *client)
-{
- drm_fb_helper_lastclose(client->dev);
-
- return 0;
-}
-
-static int drm_fbdev_dma_client_hotplug(struct drm_client_dev *client)
-{
- struct drm_fb_helper *fb_helper = drm_fb_helper_from_client(client);
- struct drm_device *dev = client->dev;
- int ret;
-
- if (dev->fb_helper)
- return drm_fb_helper_hotplug_event(dev->fb_helper);
-
- ret = drm_fb_helper_init(dev, fb_helper);
- if (ret)
- goto err_drm_err;
-
- if (!drm_drv_uses_atomic_modeset(dev))
- drm_helper_disable_unused_functions(dev);
-
- ret = drm_fb_helper_initial_config(fb_helper);
- if (ret)
- goto err_drm_fb_helper_fini;
-
- return 0;
-
-err_drm_fb_helper_fini:
- drm_fb_helper_fini(fb_helper);
-err_drm_err:
- drm_err(dev, "fbdev-dma: Failed to setup generic emulation (ret=%d)\n", ret);
- return ret;
-}
-
-static const struct drm_client_funcs drm_fbdev_dma_client_funcs = {
- .owner = THIS_MODULE,
- .unregister = drm_fbdev_dma_client_unregister,
- .restore = drm_fbdev_dma_client_restore,
- .hotplug = drm_fbdev_dma_client_hotplug,
-};
-
-/**
- * drm_fbdev_dma_setup() - Setup fbdev emulation for GEM DMA helpers
- * @dev: DRM device
- * @preferred_bpp: Preferred bits per pixel for the device.
- * 32 is used if this is zero.
- *
- * This function sets up fbdev emulation for GEM DMA drivers that support
- * dumb buffers with a virtual address and that can be mmap'ed.
- * drm_fbdev_dma_setup() shall be called after the DRM driver registered
- * the new DRM device with drm_dev_register().
- *
- * Restore, hotplug events and teardown are all taken care of. Drivers that do
- * suspend/resume need to call drm_fb_helper_set_suspend_unlocked() themselves.
- * Simple drivers might use drm_mode_config_helper_suspend().
- *
- * This function is safe to call even when there are no connectors present.
- * Setup will be retried on the next hotplug event.
- *
- * The fbdev is destroyed by drm_dev_unregister().
- */
-void drm_fbdev_dma_setup(struct drm_device *dev, unsigned int preferred_bpp)
-{
- struct drm_fb_helper *fb_helper;
- int ret;
-
- drm_WARN(dev, !dev->registered, "Device has not been registered.\n");
- drm_WARN(dev, dev->fb_helper, "fb_helper is already set!\n");
-
- fb_helper = kzalloc(sizeof(*fb_helper), GFP_KERNEL);
- if (!fb_helper)
- return;
- drm_fb_helper_prepare(dev, fb_helper, preferred_bpp, &drm_fbdev_dma_helper_funcs);
-
- ret = drm_client_init(dev, &fb_helper->client, "fbdev", &drm_fbdev_dma_client_funcs);
- if (ret) {
- drm_err(dev, "Failed to register client: %d\n", ret);
- goto err_drm_client_init;
- }
-
- drm_client_register(&fb_helper->client);
-
- return;
-
-err_drm_client_init:
- drm_fb_helper_unprepare(fb_helper);
- kfree(fb_helper);
-}
-EXPORT_SYMBOL(drm_fbdev_dma_setup);
@@ -3,7 +3,6 @@
#ifndef DRM_FBDEV_DMA_H
#define DRM_FBDEV_DMA_H
-struct drm_device;
struct drm_fb_helper;
struct drm_fb_helper_surface_size;
@@ -13,15 +12,9 @@ int drm_fbdev_dma_driver_fbdev_probe(struct drm_fb_helper *fb_helper,
#define DRM_FBDEV_DMA_DRIVER_OPS \
.fbdev_probe = drm_fbdev_dma_driver_fbdev_probe
-
-void drm_fbdev_dma_setup(struct drm_device *dev, unsigned int preferred_bpp);
#else
-static inline void drm_fbdev_dma_setup(struct drm_device *dev, unsigned int preferred_bpp)
-{ }
-
#define DRM_FBDEV_DMA_DRIVER_OPS \
.fbdev_probe = NULL
-
#endif
#endif
The old setup function drm_fbdev_dma_setup() is unused. Remove it and its internal callbacks. New drivers should call drm_client_setup() instead. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> --- drivers/gpu/drm/drm_fbdev_dma.c | 120 +------------------------------- include/drm/drm_fbdev_dma.h | 7 -- 2 files changed, 1 insertion(+), 126 deletions(-)