@@ -1370,7 +1370,7 @@ static int dp_dsc_fec_support_show(struct seq_file *m, void *data)
* enable DSC on the sink device or on MST branch
* its connected to.
*/
- if (aconnector->dsc_aux) {
+ if (aconnector->mst_output_port->dsc_aux) {
is_fec_supported = true;
is_dsc_supported = true;
}
@@ -806,20 +806,20 @@ bool dm_helpers_dp_write_dsc_enable(
uint8_t ret = 0;
if (stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) {
- if (!aconnector->dsc_aux)
+ if (!aconnector->mst_output_port->dsc_aux)
return false;
// apply w/a to synaptics
if (needs_dsc_aux_workaround(aconnector->dc_link) &&
(aconnector->mst_downstream_port_present.byte & 0x7) != 0x3)
return write_dsc_enable_synaptics_non_virtual_dpcd_mst(
- aconnector->dsc_aux, stream, enable_dsc);
+ aconnector->mst_output_port->dsc_aux, stream, enable_dsc);
port = aconnector->mst_output_port;
if (enable) {
- if (port->passthrough_aux) {
- ret = drm_dp_dpcd_write(port->passthrough_aux,
+ if (port->dsc_passthrough_aux) {
+ ret = drm_dp_dpcd_write(port->dsc_passthrough_aux,
DP_DSC_ENABLE,
&enable_passthrough, 1);
drm_dbg_dp(dev,
@@ -827,24 +827,24 @@ bool dm_helpers_dp_write_dsc_enable(
ret);
}
- ret = drm_dp_dpcd_write(aconnector->dsc_aux,
+ ret = drm_dp_dpcd_write(aconnector->mst_output_port->dsc_aux,
DP_DSC_ENABLE, &enable_dsc, 1);
drm_dbg_dp(dev,
"MST_DSC Sent DSC decoding enable to %s port, ret = %u\n",
- (port->passthrough_aux) ? "remote RX" :
+ (port->dsc_passthrough_aux) ? "remote RX" :
"virtual dpcd",
ret);
} else {
- ret = drm_dp_dpcd_write(aconnector->dsc_aux,
+ ret = drm_dp_dpcd_write(aconnector->mst_output_port->dsc_aux,
DP_DSC_ENABLE, &enable_dsc, 1);
drm_dbg_dp(dev,
"MST_DSC Sent DSC decoding disable to %s port, ret = %u\n",
- (port->passthrough_aux) ? "remote RX" :
+ (port->dsc_passthrough_aux) ? "remote RX" :
"virtual dpcd",
ret);
- if (port->passthrough_aux) {
- ret = drm_dp_dpcd_write(port->passthrough_aux,
+ if (port->dsc_passthrough_aux) {
+ ret = drm_dp_dpcd_write(port->dsc_passthrough_aux,
DP_DSC_ENABLE,
&enable_passthrough, 1);
drm_dbg_dp(dev,
@@ -183,8 +183,8 @@ amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
dc_sink_release(dc_sink);
aconnector->dc_sink = NULL;
aconnector->edid = NULL;
- aconnector->dsc_aux = NULL;
- port->passthrough_aux = NULL;
+ aconnector->mst_output_port->dsc_aux = NULL;
+ aconnector->mst_output_port->dsc_passthrough_aux = NULL;
}
aconnector->mst_status = MST_STATUS_DEFAULT;
@@ -214,21 +214,6 @@ bool needs_dsc_aux_workaround(struct dc_link *link)
}
#if defined(CONFIG_DRM_AMD_DC_FP)
-static bool is_synaptics_cascaded_panamera(struct dc_link *link, struct drm_dp_mst_port *port)
-{
- u8 branch_vendor_data[4] = { 0 }; // Vendor data 0x50C ~ 0x50F
-
- if (drm_dp_dpcd_read(port->mgr->aux, DP_BRANCH_VENDOR_SPECIFIC_START, &branch_vendor_data, 4) == 4) {
- if (link->dpcd_caps.branch_dev_id == DP_BRANCH_DEVICE_ID_90CC24 &&
- IS_SYNAPTICS_CASCADED_PANAMERA(link->dpcd_caps.branch_dev_name, branch_vendor_data)) {
- DRM_INFO("Synaptics Cascaded MST hub\n");
- return true;
- }
- }
-
- return false;
-}
-
static bool validate_dsc_caps_on_connector(struct amdgpu_dm_connector *aconnector)
{
struct dc_sink *dc_sink = aconnector->dc_sink;
@@ -237,32 +222,14 @@ static bool validate_dsc_caps_on_connector(struct amdgpu_dm_connector *aconnecto
u8 dsc_branch_dec_caps_raw[3] = { 0 }; // DSC branch decoder caps 0xA0 ~ 0xA2
u8 *dsc_branch_dec_caps = NULL;
- aconnector->dsc_aux = drm_dp_mst_dsc_aux_for_port(port);
-
- /*
- * drm_dp_mst_dsc_aux_for_port() will return NULL for certain configs
- * because it only check the dsc/fec caps of the "port variable" and not the dock
- *
- * This case will return NULL: DSC capabe MST dock connected to a non fec/dsc capable display
- *
- * Workaround: explicitly check the use case above and use the mst dock's aux as dsc_aux
- *
- */
- if (!aconnector->dsc_aux && !port->parent->port_parent &&
- needs_dsc_aux_workaround(aconnector->dc_link))
- aconnector->dsc_aux = &aconnector->mst_root->dm_dp_aux.aux;
-
- /* synaptics cascaded MST hub case */
- if (is_synaptics_cascaded_panamera(aconnector->dc_link, port))
- aconnector->dsc_aux = port->mgr->aux;
-
- if (!aconnector->dsc_aux)
+ drm_dp_mst_dsc_aux_for_port(port);
+ if (!aconnector->mst_output_port->dsc_aux)
return false;
- if (drm_dp_dpcd_read(aconnector->dsc_aux, DP_DSC_SUPPORT, dsc_caps, 16) < 0)
+ if (drm_dp_dpcd_read(aconnector->mst_output_port->dsc_aux, DP_DSC_SUPPORT, dsc_caps, 16) < 0)
return false;
- if (drm_dp_dpcd_read(aconnector->dsc_aux,
+ if (drm_dp_dpcd_read(aconnector->mst_output_port->dsc_aux,
DP_DSC_BRANCH_OVERALL_THROUGHPUT_0, dsc_branch_dec_caps_raw, 3) == 3)
dsc_branch_dec_caps = dsc_branch_dec_caps_raw;
@@ -279,10 +246,10 @@ static bool retrieve_downstream_port_device(struct amdgpu_dm_connector *aconnect
{
union dp_downstream_port_present ds_port_present;
- if (!aconnector->dsc_aux)
+ if (!aconnector->mst_output_port->dsc_aux)
return false;
- if (drm_dp_dpcd_read(aconnector->dsc_aux, DP_DOWNSTREAMPORT_PRESENT, &ds_port_present, 1) < 0) {
+ if (drm_dp_dpcd_read(aconnector->mst_output_port->dsc_aux, DP_DOWNSTREAMPORT_PRESENT, &ds_port_present, 1) < 0) {
DRM_INFO("Failed to read downstream_port_present 0x05 from DFP of branch device\n");
return false;
}
@@ -501,8 +468,8 @@ dm_dp_mst_detect(struct drm_connector *connector,
dc_sink_release(aconnector->dc_sink);
aconnector->dc_sink = NULL;
aconnector->edid = NULL;
- aconnector->dsc_aux = NULL;
- port->passthrough_aux = NULL;
+ aconnector->mst_output_port->dsc_aux = NULL;
+ aconnector->mst_output_port->dsc_passthrough_aux = NULL;
amdgpu_dm_set_mst_status(&aconnector->mst_status,
MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,
@@ -1293,7 +1260,7 @@ static bool is_dsc_need_re_compute(
continue;
aconnector = (struct amdgpu_dm_connector *) stream->dm_stream_context;
- if (!aconnector || !aconnector->dsc_aux)
+ if (!aconnector || !aconnector->mst_output_port->dsc_aux)
continue;
stream_on_link[new_stream_on_link_num] = aconnector;
@@ -1778,13 +1745,13 @@ enum dc_status dm_dp_mst_is_port_support_mode(
}
/*DSC necessary case*/
- if (!aconnector->dsc_aux)
+ if (!aconnector->mst_output_port->dsc_aux)
return DC_FAIL_BANDWIDTH_VALIDATE;
if (is_dsc_common_config_possible(stream, &bw_range)) {
/*capable of dsc passthough. dsc bitstream along the entire path*/
- if (aconnector->mst_output_port->passthrough_aux) {
+ if (aconnector->mst_output_port->dsc_passthrough_aux) {
if (bw_range.min_kbps > end_to_end_bw_in_kbps) {
DRM_DEBUG_DRIVER("MST_DSC dsc passthrough and decode at endpoint"
"Max dsc compression bw can't fit into end-to-end bw\n");
@@ -2259,6 +2259,7 @@ EXPORT_SYMBOL(drm_dp_stop_crc);
struct dpcd_quirk {
u8 oui[3];
u8 device_id[6];
+ u8 vendor_data[4];
bool is_branch;
u32 quirks;
};
@@ -2266,26 +2267,31 @@ struct dpcd_quirk {
#define OUI(first, second, third) { (first), (second), (third) }
#define DEVICE_ID(first, second, third, fourth, fifth, sixth) \
{ (first), (second), (third), (fourth), (fifth), (sixth) }
+#define VENDOR_DATA(first, second, third, fourth) \
+ { (first), (second), (third), (fourth) }
#define DEVICE_ID_ANY DEVICE_ID(0, 0, 0, 0, 0, 0)
+#define VENDOR_DATA_ANY VENDOR_DATA(0, 0, 0, 0)
static const struct dpcd_quirk dpcd_quirk_list[] = {
/* Analogix 7737 needs reduced M and N at HBR2 link rates */
- { OUI(0x00, 0x22, 0xb9), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_CONSTANT_N) },
+ { OUI(0x00, 0x22, 0xb9), DEVICE_ID_ANY, VENDOR_DATA_ANY, true, BIT(DP_DPCD_QUIRK_CONSTANT_N) },
/* LG LP140WF6-SPM1 eDP panel */
- { OUI(0x00, 0x22, 0xb9), DEVICE_ID('s', 'i', 'v', 'a', 'r', 'T'), false, BIT(DP_DPCD_QUIRK_CONSTANT_N) },
+ { OUI(0x00, 0x22, 0xb9), DEVICE_ID('s', 'i', 'v', 'a', 'r', 'T'), VENDOR_DATA_ANY, false, BIT(DP_DPCD_QUIRK_CONSTANT_N) },
/* Apple panels need some additional handling to support PSR */
- { OUI(0x00, 0x10, 0xfa), DEVICE_ID_ANY, false, BIT(DP_DPCD_QUIRK_NO_PSR) },
+ { OUI(0x00, 0x10, 0xfa), DEVICE_ID_ANY, VENDOR_DATA_ANY, false, BIT(DP_DPCD_QUIRK_NO_PSR) },
/* CH7511 seems to leave SINK_COUNT zeroed */
- { OUI(0x00, 0x00, 0x00), DEVICE_ID('C', 'H', '7', '5', '1', '1'), false, BIT(DP_DPCD_QUIRK_NO_SINK_COUNT) },
+ { OUI(0x00, 0x00, 0x00), DEVICE_ID('C', 'H', '7', '5', '1', '1'), VENDOR_DATA_ANY, false, BIT(DP_DPCD_QUIRK_NO_SINK_COUNT) },
/* Synaptics DP1.4 MST hubs can support DSC without virtual DPCD */
- { OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD) },
+ { OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, VENDOR_DATA_ANY, true, BIT(DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD) },
/* Synaptics DP1.4 MST hubs require DSC for some modes on which it applies HBLANK expansion. */
- { OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC) },
+ { OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, VENDOR_DATA_ANY, true, BIT(DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC) },
/* MediaTek panels (at least in U3224KBA) require DSC for modes with a short HBLANK on UHBR links. */
- { OUI(0x00, 0x0C, 0xE7), DEVICE_ID_ANY, false, BIT(DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC) },
+ { OUI(0x00, 0x0C, 0xE7), DEVICE_ID_ANY, VENDOR_DATA_ANY, false, BIT(DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC) },
/* Apple MacBookPro 2017 15 inch eDP Retina panel reports too low DP_MAX_LINK_RATE */
- { OUI(0x00, 0x10, 0xfa), DEVICE_ID(101, 68, 21, 101, 98, 97), false, BIT(DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS) },
+ { OUI(0x00, 0x10, 0xfa), DEVICE_ID(101, 68, 21, 101, 98, 97), VENDOR_DATA_ANY, false, BIT(DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS) },
+ /* Lenovo dock that needs root branch for dsc */
+ { OUI(0x90, 0xCC, 0x24), DEVICE_ID(83, 89, 78, 65, 83, 50), VENDOR_DATA(4, 6, 90, 0), true, BIT(DP_DPCD_QUIRK_DSC_MUST_ROOT_DECOMPRESSION) },
};
#undef OUI
@@ -2305,6 +2311,7 @@ drm_dp_get_quirks(const struct drm_dp_dpcd_ident *ident, bool is_branch)
u32 quirks = 0;
int i;
u8 any_device[] = DEVICE_ID_ANY;
+ u8 any_vendor[] = VENDOR_DATA_ANY;
for (i = 0; i < ARRAY_SIZE(dpcd_quirk_list); i++) {
quirk = &dpcd_quirk_list[i];
@@ -2319,6 +2326,10 @@ drm_dp_get_quirks(const struct drm_dp_dpcd_ident *ident, bool is_branch)
memcmp(quirk->device_id, ident->device_id, sizeof(ident->device_id)) != 0)
continue;
+ if (memcmp(quirk->vendor_data, any_vendor, sizeof(any_vendor)) != 0 &&
+ memcmp(quirk->vendor_data, ident->vendor_data, sizeof(ident->vendor_data)) != 0)
+ continue;
+
quirks |= quirk->quirks;
}
@@ -2344,10 +2355,11 @@ static void drm_dp_dump_desc(struct drm_dp_aux *aux,
const struct drm_dp_dpcd_ident *ident = &desc->ident;
drm_dbg_kms(aux->drm_dev,
- "%s: %s: OUI %*phD dev-ID %*pE HW-rev %d.%d SW-rev %d.%d quirks 0x%04x\n",
+ "%s: %s: OUI %*phD dev-ID %*pE vendor-DATA %*pE HW-rev %d.%d SW-rev %d.%d quirks 0x%04x\n",
aux->name, device_name,
(int)sizeof(ident->oui), ident->oui,
(int)strnlen(ident->device_id, sizeof(ident->device_id)), ident->device_id,
+ (int)strnlen(ident->vendor_data, sizeof(ident->vendor_data)), ident->vendor_data,
ident->hw_rev >> 4, ident->hw_rev & 0xf,
ident->sw_major_rev, ident->sw_minor_rev,
desc->quirks);
@@ -2258,6 +2258,8 @@ void drm_dp_mst_connector_early_unregister(struct drm_connector *connector,
drm_dbg_kms(port->mgr->dev, "unregistering %s remote bus for %s\n",
port->aux.name, connector->kdev->kobj.name);
drm_dp_aux_unregister_devnode(&port->aux);
+ port->dsc_aux = NULL;
+ port->dsc_passthrough_aux = NULL;
}
EXPORT_SYMBOL(drm_dp_mst_connector_early_unregister);
@@ -5445,7 +5447,8 @@ int drm_dp_mst_add_affected_dsc_crtcs(struct drm_atomic_state *state, struct drm
if (!crtc)
continue;
- if (!drm_dp_mst_dsc_aux_for_port(pos->port))
+ drm_dp_mst_dsc_aux_for_port(pos->port);
+ if (!pos->port->dsc_aux)
continue;
crtc_state = drm_atomic_get_crtc_state(mst_state->base.state, crtc);
@@ -5994,57 +5997,6 @@ static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_mst_port *port)
i2c_del_adapter(&port->aux.ddc);
}
-/**
- * drm_dp_mst_is_virtual_dpcd() - Is the given port a virtual DP Peer Device
- * @port: The port to check
- *
- * A single physical MST hub object can be represented in the topology
- * by multiple branches, with virtual ports between those branches.
- *
- * As of DP1.4, An MST hub with internal (virtual) ports must expose
- * certain DPCD registers over those ports. See sections 2.6.1.1.1
- * and 2.6.1.1.2 of Display Port specification v1.4 for details.
- *
- * May acquire mgr->lock
- *
- * Returns:
- * true if the port is a virtual DP peer device, false otherwise
- */
-static bool drm_dp_mst_is_virtual_dpcd(struct drm_dp_mst_port *port)
-{
- struct drm_dp_mst_port *downstream_port;
-
- if (!port || port->dpcd_rev < DP_DPCD_REV_14)
- return false;
-
- /* Virtual DP Sink (Internal Display Panel) */
- if (drm_dp_mst_port_is_logical(port))
- return true;
-
- /* DP-to-HDMI Protocol Converter */
- if (port->pdt == DP_PEER_DEVICE_DP_LEGACY_CONV &&
- !port->mcs &&
- port->ldps)
- return true;
-
- /* DP-to-DP */
- mutex_lock(&port->mgr->lock);
- if (port->pdt == DP_PEER_DEVICE_MST_BRANCHING &&
- port->mstb &&
- port->mstb->num_ports == 2) {
- list_for_each_entry(downstream_port, &port->mstb->ports, next) {
- if (downstream_port->pdt == DP_PEER_DEVICE_SST_SINK &&
- !downstream_port->input) {
- mutex_unlock(&port->mgr->lock);
- return true;
- }
- }
- }
- mutex_unlock(&port->mgr->lock);
-
- return false;
-}
-
/**
* drm_dp_mst_aux_for_parent() - Get the AUX device for an MST port's parent
* @port: MST port whose parent's AUX device is returned
@@ -6074,114 +6026,145 @@ EXPORT_SYMBOL(drm_dp_mst_aux_for_parent);
* This operation can be expensive (up to four aux reads), so
* the caller should cache the return.
*
- * Returns:
- * NULL if DSC cannot be enabled on this port, otherwise the aux device
+ * port->dsc_aux - point for dsc decompression
+ * port->dsc_passthrough_aux - point for dsc passthrough
+ *
*/
-struct drm_dp_aux *drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port)
+void drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port)
{
- struct drm_dp_mst_port *immediate_upstream_port;
- struct drm_dp_aux *immediate_upstream_aux;
- struct drm_dp_mst_port *fec_port;
+ struct drm_dp_mst_topology_mgr *mgr = port->mgr;
+ struct drm_dp_mst_port *immediate_upstream_port = NULL;
+ struct drm_dp_mst_port *fec_port = NULL;
+ struct drm_dp_mst_port *dsc_port = NULL;
+ struct drm_dp_aux *upstream_aux;
struct drm_dp_desc desc = {};
- u8 endpoint_fec;
- u8 endpoint_dsc;
+ bool end_has_dpcd = (port->dpcd_rev > 0);
+ u8 endpoint_dsc = 0;
+ u8 upstream_dsc;
+ u8 fec_cap;
if (!port)
- return NULL;
+ return;
+
+ port->dsc_aux = NULL;
+ port->dsc_passthrough_aux = NULL;
+
+ /* Check special case first */
+ if (drm_dp_read_desc(mgr->aux, &desc, true) == 0) {
+ if (drm_dp_has_quirk(&desc, DP_DPCD_QUIRK_DSC_MUST_ROOT_DECOMPRESSION)) {
+ port->dsc_aux = mgr->aux;
+ drm_info(mgr->dev, "MST_DSC DSC_MUST_ROOT_DECODING w/a\n");
+ return;
+ }
+ }
+
+ /* Policy start */
+ if (!drm_dp_mst_is_end_device(port->pdt, port->mcs)) {
+ drm_err(mgr->dev,
+ "MST_DSC Can't determine dsc aux for port %p which is not connected to end device\n",
+ port);
+ return;
+ }
if (port->parent->port_parent)
immediate_upstream_port = port->parent->port_parent;
- else
- immediate_upstream_port = NULL;
- fec_port = immediate_upstream_port;
- while (fec_port) {
- /*
- * Each physical link (i.e. not a virtual port) between the
- * output and the primary device must support FEC
- */
- if (!drm_dp_mst_is_virtual_dpcd(fec_port) &&
- !fec_port->fec_capable)
- return NULL;
+ if (end_has_dpcd) {
+ drm_info(mgr->dev, "MST_DSC check port->aux for dsc decompression capability\n");
+ if (drm_dp_dpcd_read(&port->aux, DP_DSC_SUPPORT, &endpoint_dsc, 1) != 1) {
+ drm_err(mgr->dev, "MST_DSC Can't retrieve dsc caps from endpoint port\n");
+ goto out_dsc_fail;
+ }
+ }
- fec_port = fec_port->parent->port_parent;
+ if (immediate_upstream_port) {
+ upstream_aux = &immediate_upstream_port->aux;
+ drm_info(mgr->dev, "MST_DSC check immediate_upstream_port->aux for dsc passthrough capability\n");
+ } else {
+ upstream_aux = mgr->aux;
+ drm_info(mgr->dev, "MST_DSC check mgr->aux for dsc passthrough capability\n");
}
- /* DP-to-DP peer device */
- if (drm_dp_mst_is_virtual_dpcd(immediate_upstream_port)) {
- u8 upstream_dsc;
-
- if (drm_dp_dpcd_read(&port->aux,
- DP_DSC_SUPPORT, &endpoint_dsc, 1) != 1)
- return NULL;
- if (drm_dp_dpcd_read(&port->aux,
- DP_FEC_CAPABILITY, &endpoint_fec, 1) != 1)
- return NULL;
- if (drm_dp_dpcd_read(&immediate_upstream_port->aux,
- DP_DSC_SUPPORT, &upstream_dsc, 1) != 1)
- return NULL;
-
- /* Enpoint decompression with DP-to-DP peer device */
- if ((endpoint_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED) &&
- (endpoint_fec & DP_FEC_CAPABLE) &&
- (upstream_dsc & DP_DSC_PASSTHROUGH_IS_SUPPORTED)) {
- port->passthrough_aux = &immediate_upstream_port->aux;
- return &port->aux;
- }
+ if (drm_dp_dpcd_read(upstream_aux, DP_DSC_SUPPORT, &upstream_dsc, 1) != 1) {
+ drm_err(mgr->dev, "MST_DSC Can't retrieve dsc caps from upstream port\n");
+ goto out_dsc_fail;
+ }
- /* Virtual DPCD decompression with DP-to-DP peer device */
- return &immediate_upstream_port->aux;
+ /* Consider passthrough as the first option for dsc_aux/dsc_passthrough_aux */
+ if (endpoint_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED &&
+ upstream_dsc & DP_DSC_PASSTHROUGH_IS_SUPPORTED) {
+ dsc_port = port;
+ port->dsc_aux = &port->aux;
+ port->dsc_passthrough_aux = upstream_aux;
+ drm_info(mgr->dev, "MST_DSC dsc passthrough virtual peer device and decompression at endpoint\n");
}
- /* Virtual DPCD decompression with DP-to-HDMI or Virtual DP Sink */
- if (drm_dp_mst_is_virtual_dpcd(port))
- return &port->aux;
+ if (!dsc_port) {
+ if (!immediate_upstream_port) {
+ /* Topology with 1 mstb only
+ * directly connected dp2.0 case which is enumerated as 1-to-1
+ * sst branch device that output pdt is stream sink
+ */
+ if (upstream_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED)
+ port->dsc_aux = mgr->aux;
- /*
- * Synaptics quirk
- * Applies to ports for which:
- * - Physical aux has Synaptics OUI
- * - DPv1.4 or higher
- * - Port is on primary branch device
- * - Not a VGA adapter (DP_DWN_STRM_PORT_TYPE_ANALOG)
- */
- if (immediate_upstream_port)
- immediate_upstream_aux = &immediate_upstream_port->aux;
- else
- immediate_upstream_aux = port->mgr->aux;
+ if (!port->dsc_aux) {
+ drm_err(mgr->dev, "MST_DSC dsc decompression not support at root branch\n");
+ goto out_dsc_fail;
+ }
- if (drm_dp_read_desc(immediate_upstream_aux, &desc, true))
- return NULL;
+ drm_info(mgr->dev, "MST_DSC topology with 1 mstb only, dsc decompression at root branch\n");
+ } else {
+ /* Topology with multiple mstbs */
+ dsc_port = immediate_upstream_port;
+ endpoint_dsc = upstream_dsc;
+
+ if (endpoint_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED)
+ port->dsc_aux = &dsc_port->aux;
+ else {
+ drm_err(mgr->dev,
+ "MST_DSC dsc decompression not support at immediate_upstream_port %p\n",
+ dsc_port);
+ goto out_dsc_fail;
+ }
- if (drm_dp_has_quirk(&desc, DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD)) {
- u8 dpcd_ext[DP_RECEIVER_CAP_SIZE];
+ drm_info(mgr->dev, "MST_DSC topology with multiple mstbs, dsc decompression at virtual peer device\n");
+ }
+ }
- if (drm_dp_read_dpcd_caps(immediate_upstream_aux, dpcd_ext) < 0)
- return NULL;
+ /* Check the virtual channel from source till dsc port link support FEC */
+ fec_port = dsc_port;
+ while (fec_port) {
+ /*
+ * Each link between the output and the source
+ * must support FEC. Note that virtual dpcd fec is identical
+ * to the fec capability of it's MST BU's DPRx
+ */
+ if (!fec_port->fec_capable) {
+ /* enum path result of virtual peer device will return fec_capable as false */
+ if ((drm_dp_dpcd_read(&fec_port->aux, DP_FEC_CAPABILITY, &fec_cap, 1) != 1) ||
+ !(fec_cap & DP_FEC_CAPABLE)) {
+ drm_err(mgr->dev, "MST_DSC Failed to retrieve fec caps at port %p\n", fec_port);
+ goto out_dsc_fail;
+ }
+ fec_port->fec_capable = true;
+ }
- if (dpcd_ext[DP_DPCD_REV] >= DP_DPCD_REV_14 &&
- ((dpcd_ext[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT) &&
- ((dpcd_ext[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_TYPE_MASK)
- != DP_DWN_STRM_PORT_TYPE_ANALOG)))
- return immediate_upstream_aux;
+ fec_port = fec_port->parent->port_parent;
}
- /*
- * The check below verifies if the MST sink
- * connected to the GPU is capable of DSC -
- * therefore the endpoint needs to be
- * both DSC and FEC capable.
- */
- if (drm_dp_dpcd_read(&port->aux,
- DP_DSC_SUPPORT, &endpoint_dsc, 1) != 1)
- return NULL;
- if (drm_dp_dpcd_read(&port->aux,
- DP_FEC_CAPABILITY, &endpoint_fec, 1) != 1)
- return NULL;
- if ((endpoint_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED) &&
- (endpoint_fec & DP_FEC_CAPABLE))
- return &port->aux;
+ /* Ensure fec between source and the connected DPRx */
+ if ((drm_dp_dpcd_read(mgr->aux, DP_FEC_CAPABILITY, &fec_cap, 1) != 1) ||
+ !(fec_cap & DP_FEC_CAPABLE)) {
+ drm_err(mgr->dev, "MST_DSC fec not supported between source and the connected DPRx\n");
+ goto out_dsc_fail;
+ }
- return NULL;
+ return;
+
+out_dsc_fail:
+ port->dsc_aux = NULL;
+ port->dsc_passthrough_aux = NULL;
+ return;
}
EXPORT_SYMBOL(drm_dp_mst_dsc_aux_for_port);
@@ -3219,7 +3219,7 @@ intel_dp_sink_set_dsc_passthrough(const struct intel_connector *connector,
{
struct drm_i915_private *i915 = to_i915(connector->base.dev);
struct drm_dp_aux *aux = connector->port ?
- connector->port->passthrough_aux : NULL;
+ connector->port->dsc_passthrough_aux : NULL;
if (!aux)
return;
@@ -1699,7 +1699,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
intel_dp_init_modeset_retry_work(intel_connector);
- intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port);
+ drm_dp_mst_dsc_aux_for_port(port);
+ intel_connector->dp.dsc_decompression_aux = port->dsc_aux;
intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector);
intel_connector->dp.dsc_hblank_expansion_quirk =
detect_dsc_hblank_expansion_quirk(intel_connector);
@@ -980,6 +980,7 @@
#define DP_BRANCH_REVISION_START 0x509
#define DP_BRANCH_HW_REV 0x509
#define DP_BRANCH_SW_REV 0x50A
+#define DP_BRANCH_VENDOR_SPECIFIC_START 0x50C
/* Link/Sink Device Power Control */
#define DP_SET_POWER 0x600
@@ -643,6 +643,7 @@ struct drm_dp_dpcd_ident {
u8 hw_rev;
u8 sw_major_rev;
u8 sw_minor_rev;
+ u8 vendor_data[4];
} __packed;
/**
@@ -711,6 +712,13 @@ enum drm_dp_quirk {
* requires enabling DSC.
*/
DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC,
+ /**
+ * @DP_DPCD_QUIRK_DSC_MUST_ROOT_DECOMPRESSION:
+ *
+ * The device has internal virutual dpcd with dsc decoding cap,
+ * but dsc decoding must be done at root mstb.
+ */
+ DP_DPCD_QUIRK_DSC_MUST_ROOT_DECOMPRESSION,
};
/**
@@ -135,7 +135,8 @@ struct drm_dp_mst_port {
*/
struct drm_dp_mst_branch *mstb;
struct drm_dp_aux aux; /* i2c bus for this port? */
- struct drm_dp_aux *passthrough_aux;
+ struct drm_dp_aux *dsc_aux;
+ struct drm_dp_aux *dsc_passthrough_aux;
struct drm_dp_mst_branch *parent;
struct drm_connector *connector;
@@ -956,7 +957,7 @@ bool drm_dp_mst_port_is_logical(struct drm_dp_mst_port *port)
}
struct drm_dp_aux *drm_dp_mst_aux_for_parent(struct drm_dp_mst_port *port);
-struct drm_dp_aux *drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port);
+void drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port);
static inline struct drm_dp_mst_topology_state *
to_drm_dp_mst_topology_state(struct drm_private_state *state)
[why] How we determine the dsc_aux used for dsc decompression in drm_dp_mst_dsc_aux_for_port() today having some defects: 1. The method how we determine a connected peer device is virtual or not in drm_dp_mst_is_virtual_dpcd() is not always correct. There are DP1.4 products in the market which don't fully comply with DP spec to enumerate virtual peer device. That leads to existing logic defects. For example: - Some 1.4 mst hubs with hdmi output port don't enumerate virtual dpcd/peer device. When probing the hub, its topology is constructed with a branch device only, with peer device type set as DP-to-Legacy converter for its HDMI output port. Under this condition, drm_dp_mst_is_virtual_dpcd() will still determine it's connected with a virtual peer device with virtual dpcd. And results in the section for analyzing DP-to-DP peer device case of drm_dp_mst_dsc_aux_for_port(). That's logically incorrect. 2. Existing routine is designed based on analyzing different connected peer device types, such as dp-dp, dp-hdmi peer device, and virtual sink. Such categorization is redundant and unnecessary. The key info of determining where to do dsc decompression relies on the dsc capability from dpcd only. No matter the mst branch device enumerates virtual dpcd or not, if it's supporting dsc, it must declare it's dsc capability at somewhere within its responded topology. 3. Synaptics quirk analyzing today is unnecessary as long as we determine dsc aux generically by dpcd info. Based on above, we would like to refactor the logic how we determine the dsc aux today a bit. [how] Ideally, dsc_aux should be determined by the topology connection status and dpcd capability info only. In this way, dsc aux could be determined in a more generic way, instead of enumerating and analyzing on different connected peer device types. We construct the refactored algorithm into 2 parts: 1. Firstly, deal with all known quirks or w/a for branch devices in the market that don't comply with DP spec and can't determine its dsc aux in a generic way. e.g. Force to pick root aux as the dsc decompression point. 2. Refine the dsc determination policy by generalizing detection solely based on topology connection status and dpcd info, instead of analyzing it by enumerating different connection types of the peer device. In addition, we add parsing vendor data 0x50C ~ 0x50F into dpcd quirk routine for expanding the ability to determine specific dock products that shall pick root aux as the dsc decompression point. Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> --- .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 2 +- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 20 +- .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 59 +--- drivers/gpu/drm/display/drm_dp_helper.c | 30 +- drivers/gpu/drm/display/drm_dp_mst_topology.c | 259 ++++++++---------- drivers/gpu/drm/i915/display/intel_dp.c | 2 +- drivers/gpu/drm/i915/display/intel_dp_mst.c | 3 +- include/drm/display/drm_dp.h | 1 + include/drm/display/drm_dp_helper.h | 8 + include/drm/display/drm_dp_mst_helper.h | 5 +- 10 files changed, 181 insertions(+), 208 deletions(-)