| Message ID | 20240924103156.13119-3-macpaul.lin@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/6] arm64: dts: mt8195: Fix dtbs_check error for infracfg_ao node | expand |
Il 24/09/24 12:31, Macpaul Lin ha scritto: > The display node in mt8195.dtsi was triggering a CHECK_DTBS error due > to an excessively long 'clocks' property: > display@14f06000: clocks: [[31, 14], [31, 43], [31, 44]] is too long > > To resolve this issue, add "maxItems: 3" to the 'clocks' property in > the DT schema. > > Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: split each block to individual yaml") > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> > --- > .../devicetree/bindings/display/mediatek/mediatek,split.yaml | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml > index e4affc854f3d..42d2d483cc29 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml > @@ -57,6 +57,7 @@ properties: > clocks: > items: > - description: SPLIT Clock That's at least confusing (granted that it works) - either add a description for each clock and then set `minItems: 1` (preferred), or remove this "SPLIT Clock" description and allow a maximum of 3 clocks. Removing the description can be done - IMO - because "SPLIT Clock" is, well, saying that the SPLIT block gets a SPLIT clock ... stating the obvious, anyway. Cheers, Angelo > + maxItems: 3 > > required: > - compatible
On Tue, Sep 24, 2024 at 01:42:01PM +0200, AngeloGioacchino Del Regno wrote: > Il 24/09/24 12:31, Macpaul Lin ha scritto: > > The display node in mt8195.dtsi was triggering a CHECK_DTBS error due > > to an excessively long 'clocks' property: > > display@14f06000: clocks: [[31, 14], [31, 43], [31, 44]] is too long > > > > To resolve this issue, add "maxItems: 3" to the 'clocks' property in > > the DT schema. > > > > Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: split each block to individual yaml") > > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> > > --- > > .../devicetree/bindings/display/mediatek/mediatek,split.yaml | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml > > index e4affc854f3d..42d2d483cc29 100644 > > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml > > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml > > @@ -57,6 +57,7 @@ properties: > > clocks: > > items: > > - description: SPLIT Clock > > That's at least confusing (granted that it works) - either add a description for > each clock and then set `minItems: 1` (preferred), or remove this "SPLIT Clock" > description and allow a maximum of 3 clocks. > > Removing the description can be done - IMO - because "SPLIT Clock" is, well, > saying that the SPLIT block gets a SPLIT clock ... stating the obvious, anyway. Right, but what are the other two new clocks? Are they as obvious? There's no clock-names here to give any more information as to what the other clocks are supposed to be. Kinda unrelated, but I think that "SPLIT Clock" probably isn't what the name of the clock in the IP block is anyway, sounds more like the name for it on the provider end..
On 9/25/24 00:00, Conor Dooley wrote: > On Tue, Sep 24, 2024 at 01:42:01PM +0200, AngeloGioacchino Del Regno wrote: >> Il 24/09/24 12:31, Macpaul Lin ha scritto: >>> The display node in mt8195.dtsi was triggering a CHECK_DTBS error due >>> to an excessively long 'clocks' property: >>> display@14f06000: clocks: [[31, 14], [31, 43], [31, 44]] is too long >>> >>> To resolve this issue, add "maxItems: 3" to the 'clocks' property in >>> the DT schema. >>> >>> Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: split each block to individual yaml") >>> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> >>> --- >>> .../devicetree/bindings/display/mediatek/mediatek,split.yaml | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml >>> index e4affc854f3d..42d2d483cc29 100644 >>> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml >>> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml >>> @@ -57,6 +57,7 @@ properties: >>> clocks: >>> items: >>> - description: SPLIT Clock >> >> That's at least confusing (granted that it works) - either add a description for >> each clock and then set `minItems: 1` (preferred), or remove this "SPLIT Clock" >> description and allow a maximum of 3 clocks. >> >> Removing the description can be done - IMO - because "SPLIT Clock" is, well, >> saying that the SPLIT block gets a SPLIT clock ... stating the obvious, anyway. > > Right, but what are the other two new clocks? Are they as obvious? > There's no clock-names here to give any more information as to what the > other clocks are supposed to be. > > Kinda unrelated, but I think that "SPLIT Clock" probably isn't what the > name of the clock in the IP block is anyway, sounds more like the name > for it on the provider end.. Thanks for the suggestions. I think Moudy could help on the new fixes for both DT schem and mt8195.dtsi. This patch could be separated from origin patch set. Thanks Macpaul Lin
On Wed, Sep 25, 2024 at 04:42:59PM +0800, Macpaul Lin wrote: > > On 9/25/24 00:00, Conor Dooley wrote: > > On Tue, Sep 24, 2024 at 01:42:01PM +0200, AngeloGioacchino Del Regno wrote: > > > Il 24/09/24 12:31, Macpaul Lin ha scritto: > > > > The display node in mt8195.dtsi was triggering a CHECK_DTBS error due > > > > to an excessively long 'clocks' property: > > > > display@14f06000: clocks: [[31, 14], [31, 43], [31, 44]] is too long > > > > > > > > To resolve this issue, add "maxItems: 3" to the 'clocks' property in > > > > the DT schema. > > > > > > > > Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: split each block to individual yaml") > > > > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> > > > > --- > > > > .../devicetree/bindings/display/mediatek/mediatek,split.yaml | 1 + > > > > 1 file changed, 1 insertion(+) > > > > > > > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml > > > > index e4affc854f3d..42d2d483cc29 100644 > > > > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml > > > > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml > > > > @@ -57,6 +57,7 @@ properties: > > > > clocks: > > > > items: > > > > - description: SPLIT Clock > > > > > > That's at least confusing (granted that it works) - either add a description for > > > each clock and then set `minItems: 1` (preferred), or remove this "SPLIT Clock" > > > description and allow a maximum of 3 clocks. > > > > > > Removing the description can be done - IMO - because "SPLIT Clock" is, well, > > > saying that the SPLIT block gets a SPLIT clock ... stating the obvious, anyway. > > > > Right, but what are the other two new clocks? Are they as obvious? > > There's no clock-names here to give any more information as to what the > > other clocks are supposed to be. > > > > Kinda unrelated, but I think that "SPLIT Clock" probably isn't what the > > name of the clock in the IP block is anyway, sounds more like the name > > for it on the provider end.. > > Thanks for the suggestions. I think Moudy could help on the new fixes > for both DT schem and mt8195.dtsi. This patch could be separated from > origin patch set. Not sure what you mean about separating it, if you mean correcting the description for the split clock sure. The other stuff I mentioned needs to be resolved before I'm willing to ack this.
Il 25/09/24 16:34, Conor Dooley ha scritto: > On Wed, Sep 25, 2024 at 04:42:59PM +0800, Macpaul Lin wrote: >> >> On 9/25/24 00:00, Conor Dooley wrote: >>> On Tue, Sep 24, 2024 at 01:42:01PM +0200, AngeloGioacchino Del Regno wrote: >>>> Il 24/09/24 12:31, Macpaul Lin ha scritto: >>>>> The display node in mt8195.dtsi was triggering a CHECK_DTBS error due >>>>> to an excessively long 'clocks' property: >>>>> display@14f06000: clocks: [[31, 14], [31, 43], [31, 44]] is too long >>>>> >>>>> To resolve this issue, add "maxItems: 3" to the 'clocks' property in >>>>> the DT schema. >>>>> >>>>> Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: split each block to individual yaml") >>>>> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> >>>>> --- >>>>> .../devicetree/bindings/display/mediatek/mediatek,split.yaml | 1 + >>>>> 1 file changed, 1 insertion(+) >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml >>>>> index e4affc854f3d..42d2d483cc29 100644 >>>>> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml >>>>> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml >>>>> @@ -57,6 +57,7 @@ properties: >>>>> clocks: >>>>> items: >>>>> - description: SPLIT Clock >>>> >>>> That's at least confusing (granted that it works) - either add a description for >>>> each clock and then set `minItems: 1` (preferred), or remove this "SPLIT Clock" >>>> description and allow a maximum of 3 clocks. >>>> >>>> Removing the description can be done - IMO - because "SPLIT Clock" is, well, >>>> saying that the SPLIT block gets a SPLIT clock ... stating the obvious, anyway. >>> >>> Right, but what are the other two new clocks? Are they as obvious? >>> There's no clock-names here to give any more information as to what the >>> other clocks are supposed to be. >>> >>> Kinda unrelated, but I think that "SPLIT Clock" probably isn't what the >>> name of the clock in the IP block is anyway, sounds more like the name >>> for it on the provider end.. >> >> Thanks for the suggestions. I think Moudy could help on the new fixes >> for both DT schem and mt8195.dtsi. This patch could be separated from >> origin patch set. > > Not sure what you mean about separating it, if you mean correcting the > description for the split clock sure. The other stuff I mentioned needs > to be resolved before I'm willing to ack this. He means separating this patch from the rest of the series that he pushed - which is okay, as it's a bit mixed anyway :-) Besides ... Moudy, can you please help to clarify the description of those clocks? Cheers, Angelo
On Thu, 2024-09-26 at 11:38 +0200, AngeloGioacchino Del Regno wrote: > Il 25/09/24 16:34, Conor Dooley ha scritto: > > On Wed, Sep 25, 2024 at 04:42:59PM +0800, Macpaul Lin wrote: > > > > > > On 9/25/24 00:00, Conor Dooley wrote: > > > > On Tue, Sep 24, 2024 at 01:42:01PM +0200, AngeloGioacchino Del > > > > Regno wrote: > > > > > Il 24/09/24 12:31, Macpaul Lin ha scritto: > > > > > > The display node in mt8195.dtsi was triggering a CHECK_DTBS > > > > > > error due > > > > > > to an excessively long 'clocks' property: > > > > > > display@14f06000: clocks: [[31, 14], [31, 43], [31, > > > > > > 44]] is too long > > > > > > > > > > > > To resolve this issue, add "maxItems: 3" to the 'clocks' > > > > > > property in > > > > > > the DT schema. > > > > > > > > > > > > Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: > > > > > > split each block to individual yaml") > > > > > > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> > > > > > > --- > > > > > > .../devicetree/bindings/display/mediatek/mediatek,split > > > > > > .yaml | 1 + > > > > > > 1 file changed, 1 insertion(+) > > > > > > > > > > > > diff --git > > > > > > a/Documentation/devicetree/bindings/display/mediatek/mediat > > > > > > ek,split.yaml > > > > > > b/Documentation/devicetree/bindings/display/mediatek/mediat > > > > > > ek,split.yaml > > > > > > index e4affc854f3d..42d2d483cc29 100644 > > > > > > --- > > > > > > a/Documentation/devicetree/bindings/display/mediatek/mediat > > > > > > ek,split.yaml > > > > > > +++ > > > > > > b/Documentation/devicetree/bindings/display/mediatek/mediat > > > > > > ek,split.yaml > > > > > > @@ -57,6 +57,7 @@ properties: > > > > > > clocks: > > > > > > items: > > > > > > - description: SPLIT Clock > > > > > > > > > > That's at least confusing (granted that it works) - either > > > > > add a description for > > > > > each clock and then set `minItems: 1` (preferred), or remove > > > > > this "SPLIT Clock" > > > > > description and allow a maximum of 3 clocks. > > > > > > > > > > Removing the description can be done - IMO - because "SPLIT > > > > > Clock" is, well, > > > > > saying that the SPLIT block gets a SPLIT clock ... stating > > > > > the obvious, anyway. > > > > > > > > Right, but what are the other two new clocks? Are they as > > > > obvious? > > > > There's no clock-names here to give any more information as to > > > > what the > > > > other clocks are supposed to be. > > > > > > > > Kinda unrelated, but I think that "SPLIT Clock" probably isn't > > > > what the > > > > name of the clock in the IP block is anyway, sounds more like > > > > the name > > > > for it on the provider end.. > > > > > > * Thanks for the suggestions. I think Moudy could help on the new fixes > > > for both DT schem and mt8195.dtsi. This patch could be separated > > > from > > > origin patch set. > > > > Not sure what you mean about separating it, if you mean correcting > > the > > description for the split clock sure. The other stuff I mentioned > > needs > > to be resolved before I'm willing to ack this. > > He means separating this patch from the rest of the series that he > pushed - which > is okay, as it's a bit mixed anyway :-) > > Besides ... Moudy, can you please help to clarify the description of > those clocks? > > Cheers, > Angelo Greetings, May I address the check error by adding 2 functional descriptions and specifying 'minIeims: 1' for this property, and apply the limit by setting 'maxItems: 3' in MT8195 additional condition? Sincerely, Moudy Ho
On Fri, Sep 27, 2024 at 02:27:14AM +0000, Moudy Ho (何宗原) wrote: > On Thu, 2024-09-26 at 11:38 +0200, AngeloGioacchino Del Regno wrote: > > Il 25/09/24 16:34, Conor Dooley ha scritto: > > > On Wed, Sep 25, 2024 at 04:42:59PM +0800, Macpaul Lin wrote: > > > > > > > > On 9/25/24 00:00, Conor Dooley wrote: > > > > > On Tue, Sep 24, 2024 at 01:42:01PM +0200, AngeloGioacchino Del > > > > > Regno wrote: > > > > > > Il 24/09/24 12:31, Macpaul Lin ha scritto: > > > > > > > The display node in mt8195.dtsi was triggering a CHECK_DTBS > > > > > > > error due > > > > > > > to an excessively long 'clocks' property: > > > > > > > display@14f06000: clocks: [[31, 14], [31, 43], [31, > > > > > > > 44]] is too long > > > > > > > > > > > > > > To resolve this issue, add "maxItems: 3" to the 'clocks' > > > > > > > property in > > > > > > > the DT schema. > > > > > > > > > > > > > > Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: > > > > > > > split each block to individual yaml") > > > > > > > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> > > > > > > > --- > > > > > > > .../devicetree/bindings/display/mediatek/mediatek,split > > > > > > > .yaml | 1 + > > > > > > > 1 file changed, 1 insertion(+) > > > > > > > > > > > > > > diff --git > > > > > > > a/Documentation/devicetree/bindings/display/mediatek/mediat > > > > > > > ek,split.yaml > > > > > > > b/Documentation/devicetree/bindings/display/mediatek/mediat > > > > > > > ek,split.yaml > > > > > > > index e4affc854f3d..42d2d483cc29 100644 > > > > > > > --- > > > > > > > a/Documentation/devicetree/bindings/display/mediatek/mediat > > > > > > > ek,split.yaml > > > > > > > +++ > > > > > > > b/Documentation/devicetree/bindings/display/mediatek/mediat > > > > > > > ek,split.yaml > > > > > > > @@ -57,6 +57,7 @@ properties: > > > > > > > clocks: > > > > > > > items: > > > > > > > - description: SPLIT Clock > > > > > > > > > > > > That's at least confusing (granted that it works) - either > > > > > > add a description for > > > > > > each clock and then set `minItems: 1` (preferred), or remove > > > > > > this "SPLIT Clock" > > > > > > description and allow a maximum of 3 clocks. > > > > > > > > > > > > Removing the description can be done - IMO - because "SPLIT > > > > > > Clock" is, well, > > > > > > saying that the SPLIT block gets a SPLIT clock ... stating > > > > > > the obvious, anyway. > > > > > > > > > > Right, but what are the other two new clocks? Are they as > > > > > obvious? > > > > > There's no clock-names here to give any more information as to > > > > > what the > > > > > other clocks are supposed to be. > > > > > > > > > > Kinda unrelated, but I think that "SPLIT Clock" probably isn't > > > > > what the > > > > > name of the clock in the IP block is anyway, sounds more like > > > > > the name > > > > > for it on the provider end.. > > > > > > > > > * Thanks for the suggestions. I think Moudy could help on the new > fixes > > > > for both DT schem and mt8195.dtsi. This patch could be separated > > > > from > > > > origin patch set. > > > > > > Not sure what you mean about separating it, if you mean correcting > > > the > > > description for the split clock sure. The other stuff I mentioned > > > needs > > > to be resolved before I'm willing to ack this. > > > > He means separating this patch from the rest of the series that he > > pushed - which > > is okay, as it's a bit mixed anyway :-) > > > > Besides ... Moudy, can you please help to clarify the description of > > those clocks? > > May I address the check error by adding 2 functional descriptions and > specifying 'minIeims: 1' for this property, and apply the limit by > setting 'maxItems: 3' in MT8195 additional condition? That sounds reasonable
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml index e4affc854f3d..42d2d483cc29 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml @@ -57,6 +57,7 @@ properties: clocks: items: - description: SPLIT Clock + maxItems: 3 required: - compatible
The display node in mt8195.dtsi was triggering a CHECK_DTBS error due to an excessively long 'clocks' property: display@14f06000: clocks: [[31, 14], [31, 43], [31, 44]] is too long To resolve this issue, add "maxItems: 3" to the 'clocks' property in the DT schema. Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: split each block to individual yaml") Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> --- .../devicetree/bindings/display/mediatek/mediatek,split.yaml | 1 + 1 file changed, 1 insertion(+)