@@ -354,7 +354,7 @@ static int ivpu_cmdq_push_job(struct ivpu_cmdq *cmdq, struct ivpu_job *job)
return -EBUSY;
}
- entry = &cmdq->jobq->job[tail];
+ entry = &cmdq->jobq->slot[tail].job;
entry->batch_buf_addr = job->cmd_buf_vpu_addr;
entry->job_id = job->job_id;
entry->flags = 0;
@@ -48,9 +48,10 @@ const char *ivpu_jsm_msg_type_to_str(enum vpu_ipc_msg_type type)
IVPU_CASE_TO_STR(VPU_JSM_MSG_HWS_RESUME_ENGINE_DONE);
IVPU_CASE_TO_STR(VPU_JSM_MSG_STATE_DUMP);
IVPU_CASE_TO_STR(VPU_JSM_MSG_STATE_DUMP_RSP);
- IVPU_CASE_TO_STR(VPU_JSM_MSG_BLOB_DEINIT);
+ IVPU_CASE_TO_STR(VPU_JSM_MSG_BLOB_DEINIT_DEPRECATED);
IVPU_CASE_TO_STR(VPU_JSM_MSG_DYNDBG_CONTROL);
IVPU_CASE_TO_STR(VPU_JSM_MSG_JOB_DONE);
+ IVPU_CASE_TO_STR(VPU_JSM_MSG_NATIVE_FENCE_SIGNALLED);
IVPU_CASE_TO_STR(VPU_JSM_MSG_ENGINE_RESET_DONE);
IVPU_CASE_TO_STR(VPU_JSM_MSG_ENGINE_PREEMPT_DONE);
IVPU_CASE_TO_STR(VPU_JSM_MSG_REGISTER_DB_DONE);
@@ -1,14 +1,13 @@
/* SPDX-License-Identifier: MIT */
/*
- * Copyright (c) 2020-2023, Intel Corporation.
+ * Copyright (c) 2020-2024, Intel Corporation.
*/
#ifndef VPU_BOOT_API_H
#define VPU_BOOT_API_H
/*
- * =========== FW API version information beginning ================
- * The bellow values will be used to construct the version info this way:
+ * The below values will be used to construct the version info this way:
* fw_bin_header->api_version[VPU_BOOT_API_VER_ID] = (VPU_BOOT_API_VER_MAJOR << 16) |
* VPU_BOOT_API_VER_MINOR;
* VPU_BOOT_API_VER_PATCH will be ignored. KMD and compatibility is not affected if this changes
@@ -27,19 +26,18 @@
* Minor version changes when API backward compatibility is preserved.
* Resets to 0 if Major version is incremented.
*/
-#define VPU_BOOT_API_VER_MINOR 24
+#define VPU_BOOT_API_VER_MINOR 26
/*
* API header changed (field names, documentation, formatting) but API itself has not been changed
*/
-#define VPU_BOOT_API_VER_PATCH 0
+#define VPU_BOOT_API_VER_PATCH 3
/*
* Index in the API version table
* Must be unique for each API
*/
#define VPU_BOOT_API_VER_INDEX 0
-/* ------------ FW API version information end ---------------------*/
#pragma pack(push, 4)
@@ -164,8 +162,6 @@ enum vpu_trace_destination {
/* VPU 30xx HW component IDs are sequential, so define first and last IDs. */
#define VPU_TRACE_PROC_BIT_30XX_FIRST VPU_TRACE_PROC_BIT_LRT
#define VPU_TRACE_PROC_BIT_30XX_LAST VPU_TRACE_PROC_BIT_SHV_15
-#define VPU_TRACE_PROC_BIT_KMB_FIRST VPU_TRACE_PROC_BIT_30XX_FIRST
-#define VPU_TRACE_PROC_BIT_KMB_LAST VPU_TRACE_PROC_BIT_30XX_LAST
struct vpu_boot_l2_cache_config {
u8 use;
@@ -199,6 +195,17 @@ struct vpu_warm_boot_section {
*/
#define POWER_PROFILE_SURVIVABILITY 0x1
+/**
+ * Enum for dvfs_mode boot param.
+ */
+enum vpu_governor {
+ VPU_GOV_DEFAULT = 0, /* Default Governor for the system */
+ VPU_GOV_MAX_PERFORMANCE = 1, /* Maximum performance governor */
+ VPU_GOV_ON_DEMAND = 2, /* On Demand frequency control governor */
+ VPU_GOV_POWER_SAVE = 3, /* Power save governor */
+ VPU_GOV_ON_DEMAND_PRIORITY_AWARE = 4 /* On Demand priority based governor */
+};
+
struct vpu_boot_params {
u32 magic;
u32 vpu_id;
@@ -301,7 +308,14 @@ struct vpu_boot_params {
u32 temp_sensor_period_ms;
/** PLL ratio for efficient clock frequency */
u32 pn_freq_pll_ratio;
- /** DVFS Mode: Default: 0, Max Performance: 1, On Demand: 2, Power Save: 3 */
+ /**
+ * DVFS Mode:
+ * 0 - Default, DVFS mode selected by the firmware
+ * 1 - Max Performance
+ * 2 - On Demand
+ * 3 - Power Save
+ * 4 - On Demand Priority Aware
+ */
u32 dvfs_mode;
/**
* Depending on DVFS Mode:
@@ -332,8 +346,8 @@ struct vpu_boot_params {
u64 d0i3_entry_vpu_ts;
/*
* The system time of the host operating system in microseconds.
- * E.g the number of microseconds since 1st of January 1970, or whatever date the
- * host operating system uses to maintain system time.
+ * E.g the number of microseconds since 1st of January 1970, or whatever
+ * date the host operating system uses to maintain system time.
* This value will be used to track system time on the VPU.
* The KMD is required to update this value on every VPU reset.
*/
@@ -382,10 +396,7 @@ struct vpu_boot_params {
u32 pad6[734];
};
-/*
- * Magic numbers set between host and vpu to detect corruptio of tracing init
- */
-
+/* Magic numbers set between host and vpu to detect corruption of tracing init */
#define VPU_TRACING_BUFFER_CANARY (0xCAFECAFE)
/* Tracing buffer message format definitions */
@@ -405,7 +416,9 @@ struct vpu_tracing_buffer_header {
u32 host_canary_start;
/* offset from start of buffer for trace entries */
u32 read_index;
- u32 pad_to_cache_line_size_0[14];
+ /* keeps track of wrapping on the reader side */
+ u32 read_wrap_count;
+ u32 pad_to_cache_line_size_0[13];
/* End of first cache line */
/**
@@ -22,7 +22,7 @@
/*
* Minor version changes when API backward compatibility is preserved.
*/
-#define VPU_JSM_API_VER_MINOR 16
+#define VPU_JSM_API_VER_MINOR 25
/*
* API header changed (field names, documentation, formatting) but API itself has not been changed
@@ -36,7 +36,7 @@
/*
* Number of Priority Bands for Hardware Scheduling
- * Bands: RealTime, Focus, Normal, Idle
+ * Bands: Idle(0), Normal(1), Focus(2), RealTime(3)
*/
#define VPU_HWS_NUM_PRIORITY_BANDS 4
@@ -74,6 +74,7 @@
#define VPU_JSM_STATUS_MVNCI_INTERNAL_ERROR 0xCU
/* Job status returned when the job was preempted mid-inference */
#define VPU_JSM_STATUS_PREEMPTED_MID_INFERENCE 0xDU
+#define VPU_JSM_STATUS_MVNCI_CONTEXT_VIOLATION_HW 0xEU
/*
* Host <-> VPU IPC channels.
@@ -86,18 +87,58 @@
/*
* Job flags bit masks.
*/
-#define VPU_JOB_FLAGS_NULL_SUBMISSION_MASK 0x00000001
-#define VPU_JOB_FLAGS_PRIVATE_DATA_MASK 0xFF000000
+enum {
+ /*
+ * Null submission mask.
+ * When set, batch buffer's commands are not processed but returned as
+ * successful immediately, except fences and timestamps.
+ * When cleared, batch buffer's commands are processed normally.
+ * Used for testing and profiling purposes.
+ */
+ VPU_JOB_FLAGS_NULL_SUBMISSION_MASK = (1 << 0U),
+ /*
+ * Inline command mask.
+ * When set, the object in job queue is an inline command (see struct vpu_inline_cmd below).
+ * When cleared, the object in job queue is a job (see struct vpu_job_queue_entry below).
+ */
+ VPU_JOB_FLAGS_INLINE_CMD_MASK = (1 << 1U),
+ /*
+ * VPU private data mask.
+ * Reserved for the VPU to store private data about the job (or inline command)
+ * while being processed.
+ */
+ VPU_JOB_FLAGS_PRIVATE_DATA_MASK = 0xFFFF0000U
+};
/*
- * Sizes of the reserved areas in jobs, in bytes.
+ * Job queue flags bit masks.
*/
-#define VPU_JOB_RESERVED_BYTES 8
+enum {
+ /*
+ * No job done notification mask.
+ * When set, indicates that no job done notification should be sent for any
+ * job from this queue. When cleared, indicates that job done notification
+ * should be sent for every job completed from this queue.
+ */
+ VPU_JOB_QUEUE_FLAGS_NO_JOB_DONE_MASK = (1 << 0U),
+ /*
+ * Native fence usage mask.
+ * When set, indicates that job queue uses native fences (as inline commands
+ * in job queue). Such queues may also use legacy fences (as commands in batch buffers).
+ * When cleared, indicates the job queue only uses legacy fences.
+ * NOTE: For queues using native fences, VPU expects that all jobs in the queue
+ * are immediately followed by an inline command object. This object is expected
+ * to be a fence signal command in most cases, but can also be a NOP in case the host
+ * does not need per-job fence signalling. Other inline commands objects can be
+ * inserted between "job and inline command" pairs.
+ */
+ VPU_JOB_QUEUE_FLAGS_USE_NATIVE_FENCE_MASK = (1 << 1U),
-/*
- * Sizes of the reserved areas in job queues, in bytes.
- */
-#define VPU_JOB_QUEUE_RESERVED_BYTES 52
+ /*
+ * Enable turbo mode for testing NPU performance; not recommended for regular usage.
+ */
+ VPU_JOB_QUEUE_FLAGS_TURBO_MODE = (1 << 2U)
+};
/*
* Max length (including trailing NULL char) of trace entity name (e.g., the
@@ -140,24 +181,113 @@
*/
#define VPU_HWS_INVALID_CMDQ_HANDLE 0ULL
+/*
+ * Inline commands types.
+ */
+/*
+ * NOP.
+ * VPU does nothing other than consuming the inline command object.
+ */
+#define VPU_INLINE_CMD_TYPE_NOP 0x0
+/*
+ * Fence wait.
+ * VPU waits for the fence current value to reach monitored value.
+ * Fence wait operations are executed upon job dispatching. While waiting for
+ * the fence to be satisfied, VPU blocks fetching of the next objects in the queue.
+ * Jobs present in the queue prior to the fence wait object may be processed
+ * concurrently.
+ */
+#define VPU_INLINE_CMD_TYPE_FENCE_WAIT 0x1
+/*
+ * Fence signal.
+ * VPU sets the fence current value to the provided value. If new current value
+ * is equal to or higher than monitored value, VPU sends fence signalled notification
+ * to the host. Fence signal operations are executed upon completion of all the jobs
+ * present in the queue prior to them, and in-order relative to each other in the queue.
+ * But jobs in-between them may be processed concurrently and may complete out-of-order.
+ */
+#define VPU_INLINE_CMD_TYPE_FENCE_SIGNAL 0x2
+
+/*
+ * Job scheduling priority bands for both hardware scheduling and OS scheduling.
+ */
+enum vpu_job_scheduling_priority_band {
+ VPU_JOB_SCHEDULING_PRIORITY_BAND_IDLE = 0,
+ VPU_JOB_SCHEDULING_PRIORITY_BAND_NORMAL = 1,
+ VPU_JOB_SCHEDULING_PRIORITY_BAND_FOCUS = 2,
+ VPU_JOB_SCHEDULING_PRIORITY_BAND_REALTIME = 3,
+ VPU_JOB_SCHEDULING_PRIORITY_BAND_COUNT = 4,
+};
+
/*
* Job format.
+ * Jobs defines the actual workloads to be executed by a given engine.
*/
struct vpu_job_queue_entry {
- u64 batch_buf_addr; /**< Address of VPU commands batch buffer */
- u32 job_id; /**< Job ID */
- u32 flags; /**< Flags bit field, see VPU_JOB_FLAGS_* above */
- u64 root_page_table_addr; /**< Address of root page table to use for this job */
- u64 root_page_table_update_counter; /**< Page tables update events counter */
- u64 primary_preempt_buf_addr;
+ /**< Address of VPU commands batch buffer */
+ u64 batch_buf_addr;
+ /**< Job ID */
+ u32 job_id;
+ /**< Flags bit field, see VPU_JOB_FLAGS_* above */
+ u32 flags;
+ /**
+ * Doorbell ring timestamp taken by KMD from SoC's global system clock, in
+ * microseconds. NPU can convert this value to its own fixed clock's timebase,
+ * to match other profiling timestamps.
+ */
+ u64 doorbell_timestamp;
+ /**< Extra id for job tracking, used only in the firmware perf traces */
+ u64 host_tracking_id;
/**< Address of the primary preemption buffer to use for this job */
- u32 primary_preempt_buf_size;
+ u64 primary_preempt_buf_addr;
/**< Size of the primary preemption buffer to use for this job */
- u32 secondary_preempt_buf_size;
+ u32 primary_preempt_buf_size;
/**< Size of secondary preemption buffer to use for this job */
- u64 secondary_preempt_buf_addr;
+ u32 secondary_preempt_buf_size;
/**< Address of secondary preemption buffer to use for this job */
- u8 reserved_0[VPU_JOB_RESERVED_BYTES];
+ u64 secondary_preempt_buf_addr;
+ u64 reserved_0;
+};
+
+/*
+ * Inline command format.
+ * Inline commands are the commands executed at scheduler level (typically,
+ * synchronization directives). Inline command and job objects must be of
+ * the same size and have flags field at same offset.
+ */
+struct vpu_inline_cmd {
+ u64 reserved_0;
+ /* Inline command type, see VPU_INLINE_CMD_TYPE_* defines. */
+ u32 type;
+ /* Flags bit field, see VPU_JOB_FLAGS_* above. */
+ u32 flags;
+ /* Inline command payload. Depends on inline command type. */
+ union {
+ /* Fence (wait and signal) commands' payload. */
+ struct {
+ /* Fence object handle. */
+ u64 fence_handle;
+ /* User VA of the current fence value. */
+ u64 current_value_va;
+ /* User VA of the monitored fence value (read-only). */
+ u64 monitored_value_va;
+ /* Value to wait for or write in fence location. */
+ u64 value;
+ /* User VA of the log buffer in which to add log entry on completion. */
+ u64 log_buffer_va;
+ } fence;
+ /* Other commands do not have a payload. */
+ /* Payload definition for future inline commands can be inserted here. */
+ u64 reserved_1[6];
+ } payload;
+};
+
+/*
+ * Job queue slots can be populated either with job objects or inline command objects.
+ */
+union vpu_jobq_slot {
+ struct vpu_job_queue_entry job;
+ struct vpu_inline_cmd inline_cmd;
};
/*
@@ -167,7 +297,21 @@ struct vpu_job_queue_header {
u32 engine_idx;
u32 head;
u32 tail;
- u8 reserved_0[VPU_JOB_QUEUE_RESERVED_BYTES];
+ u32 flags;
+ /* Set to 1 to indicate priority_band field is valid */
+ u32 priority_band_valid;
+ /*
+ * Priority for the work of this job queue, valid only if the HWS is NOT used
+ * and the `priority_band_valid` is set to 1. It is applied only during
+ * the VPU_JSM_MSG_REGISTER_DB message processing.
+ * The device firmware might use the `priority_band` to optimize the power
+ * management logic, but it will not affect the order of jobs.
+ * Available priority bands: @see enum vpu_job_scheduling_priority_band
+ */
+ u32 priority_band;
+ /* Inside realtime band assigns a further priority, limited to 0..31 range */
+ u32 realtime_priority_level;
+ u32 reserved_0[9];
};
/*
@@ -175,7 +319,7 @@ struct vpu_job_queue_header {
*/
struct vpu_job_queue {
struct vpu_job_queue_header header;
- struct vpu_job_queue_entry job[];
+ union vpu_jobq_slot slot[];
};
/**
@@ -197,9 +341,7 @@ enum vpu_trace_entity_type {
struct vpu_hws_log_buffer_header {
/* Written by VPU after adding a log entry. Initialised by host to 0. */
u32 first_free_entry_index;
- /* Incremented by VPU every time the VPU overwrites the 0th entry;
- * initialised by host to 0.
- */
+ /* Incremented by VPU every time the VPU writes the 0th entry; initialised by host to 0. */
u32 wraparound_count;
/*
* This is the number of buffers that can be stored in the log buffer provided by the host.
@@ -230,14 +372,80 @@ struct vpu_hws_log_buffer_entry {
u64 operation_data[2];
};
+/* Native fence log buffer types. */
+enum vpu_hws_native_fence_log_type {
+ VPU_HWS_NATIVE_FENCE_LOG_TYPE_WAITS = 1,
+ VPU_HWS_NATIVE_FENCE_LOG_TYPE_SIGNALS = 2
+};
+
+/* HWS native fence log buffer header. */
+struct vpu_hws_native_fence_log_header {
+ union {
+ struct {
+ /* Index of the first free entry in buffer. */
+ u32 first_free_entry_idx;
+ /* Incremented each time NPU wraps around the buffer to write next entry. */
+ u32 wraparound_count;
+ };
+ /* Field allowing atomic update of both fields above. */
+ u64 atomic_wraparound_and_entry_idx;
+ };
+ /* Log buffer type, see enum vpu_hws_native_fence_log_type. */
+ u64 type;
+ /* Allocated number of entries in the log buffer. */
+ u64 entry_nb;
+ u64 reserved[2];
+};
+
+/* Native fence log operation types. */
+enum vpu_hws_native_fence_log_op {
+ VPU_HWS_NATIVE_FENCE_LOG_OP_SIGNAL_EXECUTED = 0,
+ VPU_HWS_NATIVE_FENCE_LOG_OP_WAIT_UNBLOCKED = 1
+};
+
+/* HWS native fence log entry. */
+struct vpu_hws_native_fence_log_entry {
+ /* Newly signaled/unblocked fence value. */
+ u64 fence_value;
+ /* Native fence object handle to which this operation belongs. */
+ u64 fence_handle;
+ /* Operation type, see enum vpu_hws_native_fence_log_op. */
+ u64 op_type;
+ u64 reserved_0;
+ /*
+ * VPU_HWS_NATIVE_FENCE_LOG_OP_WAIT_UNBLOCKED only: Timestamp at which fence
+ * wait was started (in NPU SysTime).
+ */
+ u64 fence_wait_start_ts;
+ u64 reserved_1;
+ /* Timestamp at which fence operation was completed (in NPU SysTime). */
+ u64 fence_end_ts;
+};
+
+/* Native fence log buffer. */
+struct vpu_hws_native_fence_log_buffer {
+ struct vpu_hws_native_fence_log_header header;
+ struct vpu_hws_native_fence_log_entry entry[];
+};
+
/*
* Host <-> VPU IPC messages types.
*/
enum vpu_ipc_msg_type {
VPU_JSM_MSG_UNKNOWN = 0xFFFFFFFF,
+
/* IPC Host -> Device, Async commands */
VPU_JSM_MSG_ASYNC_CMD = 0x1100,
VPU_JSM_MSG_ENGINE_RESET = VPU_JSM_MSG_ASYNC_CMD,
+ /**
+ * Preempt engine. The NPU stops (preempts) all the jobs currently
+ * executing on the target engine making the engine become idle and ready to
+ * execute new jobs.
+ * NOTE: The NPU does not remove unstarted jobs (if any) from job queues of
+ * the target engine, but it stops processing them (until the queue doorbell
+ * is rung again); the host is responsible to reset the job queue, either
+ * after preemption or when resubmitting jobs to the queue.
+ */
VPU_JSM_MSG_ENGINE_PREEMPT = 0x1101,
VPU_JSM_MSG_REGISTER_DB = 0x1102,
VPU_JSM_MSG_UNREGISTER_DB = 0x1103,
@@ -323,9 +531,10 @@ enum vpu_ipc_msg_type {
* NOTE: Please introduce new ASYNC commands before this one. *
*/
VPU_JSM_MSG_STATE_DUMP = 0x11FF,
+
/* IPC Host -> Device, General commands */
VPU_JSM_MSG_GENERAL_CMD = 0x1200,
- VPU_JSM_MSG_BLOB_DEINIT = VPU_JSM_MSG_GENERAL_CMD,
+ VPU_JSM_MSG_BLOB_DEINIT_DEPRECATED = VPU_JSM_MSG_GENERAL_CMD,
/**
* Control dyndbg behavior by executing a dyndbg command; equivalent to
* Linux command: `echo '<dyndbg_cmd>' > <debugfs>/dynamic_debug/control`.
@@ -335,8 +544,12 @@ enum vpu_ipc_msg_type {
* Perform the save procedure for the D0i3 entry
*/
VPU_JSM_MSG_PWR_D0I3_ENTER = 0x1202,
+
/* IPC Device -> Host, Job completion */
VPU_JSM_MSG_JOB_DONE = 0x2100,
+ /* IPC Device -> Host, Fence signalled */
+ VPU_JSM_MSG_NATIVE_FENCE_SIGNALLED = 0x2101,
+
/* IPC Device -> Host, Async command completion */
VPU_JSM_MSG_ASYNC_CMD_DONE = 0x2200,
VPU_JSM_MSG_ENGINE_RESET_DONE = VPU_JSM_MSG_ASYNC_CMD_DONE,
@@ -422,6 +635,7 @@ enum vpu_ipc_msg_type {
* NOTE: Please introduce new ASYNC responses before this one. *
*/
VPU_JSM_MSG_STATE_DUMP_RSP = 0x22FF,
+
/* IPC Device -> Host, General command completion */
VPU_JSM_MSG_GENERAL_CMD_DONE = 0x2300,
VPU_JSM_MSG_BLOB_DEINIT_DONE = VPU_JSM_MSG_GENERAL_CMD_DONE,
@@ -600,11 +814,6 @@ struct vpu_jsm_metric_streamer_update {
u64 next_buffer_size;
};
-struct vpu_ipc_msg_payload_blob_deinit {
- /* 64-bit unique ID for the blob to be de-initialized. */
- u64 blob_id;
-};
-
struct vpu_ipc_msg_payload_job_done {
/* Engine to which the job was submitted. */
u32 engine_idx;
@@ -622,6 +831,21 @@ struct vpu_ipc_msg_payload_job_done {
u64 cmdq_id;
};
+/*
+ * Notification message upon native fence signalling.
+ * @see VPU_JSM_MSG_NATIVE_FENCE_SIGNALLED
+ */
+struct vpu_ipc_msg_payload_native_fence_signalled {
+ /* Engine ID. */
+ u32 engine_idx;
+ /* Host SSID. */
+ u32 host_ssid;
+ /* CMDQ ID */
+ u64 cmdq_id;
+ /* Fence object handle. */
+ u64 fence_handle;
+};
+
struct vpu_jsm_engine_reset_context {
/* Host SSID */
u32 host_ssid;
@@ -700,11 +924,6 @@ struct vpu_ipc_msg_payload_get_power_level_count_done {
u8 power_limit[16];
};
-struct vpu_ipc_msg_payload_blob_deinit_done {
- /* 64-bit unique ID for the blob de-initialized. */
- u64 blob_id;
-};
-
/* HWS priority band setup request / response */
struct vpu_ipc_msg_payload_hws_priority_band_setup {
/*
@@ -794,7 +1013,10 @@ struct vpu_ipc_msg_payload_hws_set_context_sched_properties {
u32 reserved_0;
/* Command queue id */
u64 cmdq_id;
- /* Priority band to assign to work of this context */
+ /*
+ * Priority band to assign to work of this context.
+ * Available priority bands: @see enum vpu_job_scheduling_priority_band
+ */
u32 priority_band;
/* Inside realtime band assigns a further priority */
u32 realtime_priority_level;
@@ -869,9 +1091,7 @@ struct vpu_ipc_msg_payload_hws_set_scheduling_log {
*/
u64 notify_index;
/*
- * Enable extra events to be output to log for debug of scheduling algorithm.
- * Interpreted by VPU as a boolean to enable or disable, expected values are
- * 0 and 1.
+ * Field is now deprecated, will be removed when KMD is updated to support removal
*/
u32 enable_extra_events;
/* Zero Padding */
@@ -1243,10 +1463,10 @@ union vpu_ipc_msg_payload {
struct vpu_jsm_metric_streamer_start metric_streamer_start;
struct vpu_jsm_metric_streamer_stop metric_streamer_stop;
struct vpu_jsm_metric_streamer_update metric_streamer_update;
- struct vpu_ipc_msg_payload_blob_deinit blob_deinit;
struct vpu_ipc_msg_payload_ssid_release ssid_release;
struct vpu_jsm_hws_register_db hws_register_db;
struct vpu_ipc_msg_payload_job_done job_done;
+ struct vpu_ipc_msg_payload_native_fence_signalled native_fence_signalled;
struct vpu_ipc_msg_payload_engine_reset_done engine_reset_done;
struct vpu_ipc_msg_payload_engine_preempt_done engine_preempt_done;
struct vpu_ipc_msg_payload_register_db_done register_db_done;
@@ -1254,7 +1474,6 @@ union vpu_ipc_msg_payload {
struct vpu_ipc_msg_payload_query_engine_hb_done query_engine_hb_done;
struct vpu_ipc_msg_payload_get_power_level_count_done get_power_level_count_done;
struct vpu_jsm_metric_streamer_done metric_streamer_done;
- struct vpu_ipc_msg_payload_blob_deinit_done blob_deinit_done;
struct vpu_ipc_msg_payload_trace_config trace_config;
struct vpu_ipc_msg_payload_trace_capability_rsp trace_capability;
struct vpu_ipc_msg_payload_trace_get_name trace_get_name;