| Message ID | 20241007-yuv-v12-8-01c1ada6fec8@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/vkms: Reimplement line-per-line pixel conversion for plane reading | expand |
Hi Louis, On 07/10/24 13:10, Louis Chauvet wrote: > Re-introduce a line-by-line composition algorithm for each pixel format. > This allows more performance by not requiring an indirection per pixel > read. This patch is focused on readability of the code. > > Line-by-line composition was introduced by [1] but rewritten back to > pixel-by-pixel algorithm in [2]. At this time, nobody noticed the impact > on performance, and it was merged. > > This patch is almost a revert of [2], but in addition efforts have been > made to increase readability and maintainability of the rotation handling. > The blend function is now divided in two parts: > - Transformation of coordinates from the output referential to the source > referential > - Line conversion and blending > > Most of the complexity of the rotation management is avoided by using > drm_rect_* helpers. The remaining complexity is around the clipping, to > avoid reading/writing outside source/destination buffers. > > The pixel conversion is now done line-by-line, so the read_pixel_t was > replaced with read_pixel_line_t callback. This way the indirection is only > required once per line and per plane, instead of once per pixel and per > plane. > > The read_line_t callbacks are very similar for most pixel format, but it > is required to avoid performance impact. Some helpers for color > conversion were introduced to avoid code repetition: > - *_to_argb_u16: perform colors conversion. They should be inlined by the > compiler, and they are used to avoid repetition between multiple variants > of the same format (argb/xrgb and maybe in the future for formats like > bgr formats). > > This new algorithm was tested with: > - kms_plane (for color conversions) > - kms_rotation_crc (for rotations of planes) > - kms_cursor_crc (for translations of planes) > - kms_rotation (for all rotations and formats combinations) [3] > The performance gain was mesured with kms_fb_stress [4] with some > modification to fix the writeback format. > > The performance improvement is around 5 to 10%. > > [1]: commit 8ba1648567e2 ("drm: vkms: Refactor the plane composer to accept > new formats") > https://lore.kernel.org/all/20220905190811.25024-7-igormtorrente@gmail.com/ > [2]: commit 322d716a3e8a ("drm/vkms: isolate pixel conversion > functionality") > https://lore.kernel.org/all/20230418130525.128733-2-mcanal@igalia.com/ > [3]: https://lore.kernel.org/igt-dev/20240313-new_rotation-v2-0-6230fd5cae59@bootlin.com/ > [4]: https://lore.kernel.org/all/20240422-kms_fb_stress-dev-v5-0-0c577163dc88@riseup.net/ > > Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com> > Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> > > # Conflicts: > # drivers/gpu/drm/vkms/vkms_composer.c > --- > drivers/gpu/drm/vkms/vkms_composer.c | 234 ++++++++++++++++++++++++++++------- > drivers/gpu/drm/vkms/vkms_drv.h | 28 +++-- > drivers/gpu/drm/vkms/vkms_formats.c | 224 ++++++++++++++++++++------------- > drivers/gpu/drm/vkms/vkms_formats.h | 2 +- > drivers/gpu/drm/vkms/vkms_plane.c | 5 +- > 5 files changed, 344 insertions(+), 149 deletions(-) > [...] > > -static void RGB565_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16 *out_pixel) > +static struct pixel_argb_u16 argb_u16_from_RGB565(const __le16 *pixel) > { > - __le16 *pixel = (__le16 *)in_pixel; > + struct pixel_argb_u16 out_pixel; > > s64 fp_rb_ratio = drm_fixp_div(drm_int2fixp(65535), drm_int2fixp(31)); > s64 fp_g_ratio = drm_fixp_div(drm_int2fixp(65535), drm_int2fixp(63)); > @@ -226,40 +194,120 @@ static void RGB565_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16 *out_pi > s64 fp_g = drm_int2fixp((rgb_565 >> 5) & 0x3f); > s64 fp_b = drm_int2fixp(rgb_565 & 0x1f); > > - out_pixel->a = (u16)0xffff; > - out_pixel->r = drm_fixp2int_round(drm_fixp_mul(fp_r, fp_rb_ratio)); > - out_pixel->g = drm_fixp2int_round(drm_fixp_mul(fp_g, fp_g_ratio)); > - out_pixel->b = drm_fixp2int_round(drm_fixp_mul(fp_b, fp_rb_ratio)); > + out_pixel.a = (u16)0xffff; > + out_pixel.r = drm_fixp2int_round(drm_fixp_mul(fp_r, fp_rb_ratio)); > + out_pixel.g = drm_fixp2int_round(drm_fixp_mul(fp_g, fp_g_ratio)); > + out_pixel.b = drm_fixp2int_round(drm_fixp_mul(fp_b, fp_rb_ratio)); > + > + return out_pixel; > } > > -/** > - * vkms_compose_row - compose a single row of a plane > - * @stage_buffer: output line with the composed pixels > - * @plane: state of the plane that is being composed > - * @y: y coordinate of the row > +/* > + * The following functions are read_line function for each pixel format supported by VKMS. > + * > + * They read a line starting at the point @x_start,@y_start following the @direction. The result > + * is stored in @out_pixel and in the format ARGB16161616. > + * > + * These functions are very repetitive, but the innermost pixel loops must be kept inside these > + * functions for performance reasons. Some benchmarking was done in [1] where having the innermost > + * loop factored out of these functions showed a slowdown by a factor of three. > * > - * This function composes a single row of a plane. It gets the source pixels > - * through the y coordinate (see get_packed_src_addr()) and goes linearly > - * through the source pixel, reading the pixels and converting it to > - * ARGB16161616 (see the pixel_read() callback). For rotate-90 and rotate-270, > - * the source pixels are not traversed linearly. The source pixels are queried > - * on each iteration in order to traverse the pixels vertically. > + * [1]: https://lore.kernel.org/dri-devel/d258c8dc-78e9-4509-9037-a98f7f33b3a3@riseup.net/ > */ > -void vkms_compose_row(struct line_buffer *stage_buffer, struct vkms_plane_state *plane, int y) > + > +static void ARGB8888_read_line(const struct vkms_plane_state *plane, int x_start, int y_start, > + enum pixel_read_direction direction, int count, > + struct pixel_argb_u16 out_pixel[]) > { > - struct pixel_argb_u16 *out_pixels = stage_buffer->pixels; > - struct vkms_frame_info *frame_info = plane->frame_info; > - u8 *src_pixels = get_packed_src_addr(frame_info, y, 0); > - int limit = min_t(size_t, drm_rect_width(&frame_info->dst), stage_buffer->n_pixels); > + struct pixel_argb_u16 *end = out_pixel + count; > + u8 *src_pixels; > + > + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); > + > + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); > + > + while (out_pixel < end) { > + u8 *px = (u8 *)src_pixels; Why are you converting u8* to u8*? There are repetitions of this pattern in this patch. > + *out_pixel = argb_u16_from_u8888(px[3], px[2], px[1], px[0]); > + out_pixel += 1; > + src_pixels += step; > + } > +} > + > +static void XRGB8888_read_line(const struct vkms_plane_state *plane, int x_start, int y_start, > + enum pixel_read_direction direction, int count, > + struct pixel_argb_u16 out_pixel[]) > +{ > + struct pixel_argb_u16 *end = out_pixel + count; > + u8 *src_pixels; > + > + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); > + > + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); > + > + while (out_pixel < end) { > + u8 *px = (u8 *)src_pixels; > + *out_pixel = argb_u16_from_u8888(255, px[2], px[1], px[0]); > + out_pixel += 1; > + src_pixels += step; > + } > +} > + > +static void ARGB16161616_read_line(const struct vkms_plane_state *plane, int x_start, > + int y_start, enum pixel_read_direction direction, int count, > + struct pixel_argb_u16 out_pixel[]) > +{ > + struct pixel_argb_u16 *end = out_pixel + count; > + u8 *src_pixels; > + > + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); > + > + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); > + > + while (out_pixel < end) { > + u16 *px = (u16 *)src_pixels; > + *out_pixel = argb_u16_from_u16161616(px[3], px[2], px[1], px[0]); > + out_pixel += 1; > + src_pixels += step; > + } > +} > + > +static void XRGB16161616_read_line(const struct vkms_plane_state *plane, int x_start, > + int y_start, enum pixel_read_direction direction, int count, > + struct pixel_argb_u16 out_pixel[]) > +{ > + struct pixel_argb_u16 *end = out_pixel + count; > + u8 *src_pixels; > + > + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); > + > + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); > + > + while (out_pixel < end) { > + __le16 *px = (__le16 *)src_pixels; > + *out_pixel = argb_u16_from_le16161616(cpu_to_le16(0xFFFF), px[2], px[1], px[0]); > + out_pixel += 1; > + src_pixels += step; > + } > +} > + > +static void RGB565_read_line(const struct vkms_plane_state *plane, int x_start, > + int y_start, enum pixel_read_direction direction, int count, > + struct pixel_argb_u16 out_pixel[]) > +{ > + struct pixel_argb_u16 *end = out_pixel + count; > + u8 *src_pixels; > + > + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); > > - for (size_t x = 0; x < limit; x++, src_pixels += frame_info->fb->format->cpp[0]) { > - int x_pos = get_x_position(frame_info, limit, x); > + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); > > - if (drm_rotation_90_or_270(frame_info->rotation)) > - src_pixels = get_packed_src_addr(frame_info, x + frame_info->rotated.y1, 0) > - + frame_info->fb->format->cpp[0] * y; > + while (out_pixel < end) { > + __le16 *px = (__le16 *)src_pixels; > > - plane->pixel_read(src_pixels, &out_pixels[x_pos]); > + *out_pixel = argb_u16_from_RGB565(px); > + out_pixel += 1; > + src_pixels += step; > } > } > > @@ -359,25 +407,25 @@ void vkms_writeback_row(struct vkms_writeback_job *wb, > } > > /** > - * get_pixel_read_function() - Retrieve the correct read_pixel function for a specific > + * get_pixel_read_line_function() - Retrieve the correct read_line function for a specific > * format. The returned pointer is NULL for unsupported pixel formats. The caller must ensure that > * the pointer is valid before using it in a vkms_plane_state. > * > * @format: DRM_FORMAT_* value for which to obtain a conversion function (see [drm_fourcc.h]) > */ > -pixel_read_t get_pixel_read_function(u32 format) > +pixel_read_line_t get_pixel_read_line_function(u32 format) > { > switch (format) { > case DRM_FORMAT_ARGB8888: > - return &ARGB8888_to_argb_u16; > + return &ARGB8888_read_line; > case DRM_FORMAT_XRGB8888: > - return &XRGB8888_to_argb_u16; > + return &XRGB8888_read_line; > case DRM_FORMAT_ARGB16161616: > - return &ARGB16161616_to_argb_u16; > + return &ARGB16161616_read_line; > case DRM_FORMAT_XRGB16161616: > - return &XRGB16161616_to_argb_u16; > + return &XRGB16161616_read_line; > case DRM_FORMAT_RGB565: > - return &RGB565_to_argb_u16; > + return &RGB565_read_line; > default: > /* > * This is a bug in vkms_plane_atomic_check(). All the supported > diff --git a/drivers/gpu/drm/vkms/vkms_formats.h b/drivers/gpu/drm/vkms/vkms_formats.h > index 3ecea4563254..8d2bef95ff79 100644 > --- a/drivers/gpu/drm/vkms/vkms_formats.h > +++ b/drivers/gpu/drm/vkms/vkms_formats.h > @@ -5,7 +5,7 @@ > > #include "vkms_drv.h" > > -pixel_read_t get_pixel_read_function(u32 format); > +pixel_read_line_t get_pixel_read_line_function(u32 format); > > pixel_write_t get_pixel_write_function(u32 format); > > diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c > index 10e9b23dab28..8875bed76410 100644 > --- a/drivers/gpu/drm/vkms/vkms_plane.c > +++ b/drivers/gpu/drm/vkms/vkms_plane.c > @@ -112,7 +112,6 @@ static void vkms_plane_atomic_update(struct drm_plane *plane, > frame_info = vkms_plane_state->frame_info; > memcpy(&frame_info->src, &new_state->src, sizeof(struct drm_rect)); > memcpy(&frame_info->dst, &new_state->dst, sizeof(struct drm_rect)); > - memcpy(&frame_info->rotated, &new_state->dst, sizeof(struct drm_rect)); If you won't use rotated anymore, delete it from the struct. Best Regards, - Maíra > frame_info->fb = fb; > memcpy(&frame_info->map, &shadow_plane_state->data, sizeof(frame_info->map)); > drm_framebuffer_get(frame_info->fb); > @@ -122,10 +121,8 @@ static void vkms_plane_atomic_update(struct drm_plane *plane, > DRM_MODE_REFLECT_X | > DRM_MODE_REFLECT_Y); > > - drm_rect_rotate(&frame_info->rotated, drm_rect_width(&frame_info->rotated), > - drm_rect_height(&frame_info->rotated), frame_info->rotation); > > - vkms_plane_state->pixel_read = get_pixel_read_function(fmt); > + vkms_plane_state->pixel_read_line = get_pixel_read_line_function(fmt); > } > > static int vkms_plane_atomic_check(struct drm_plane *plane, >
On 26/10/24 - 11:26, Maíra Canal wrote: > Hi Louis, > > On 07/10/24 13:10, Louis Chauvet wrote: > > Re-introduce a line-by-line composition algorithm for each pixel format. > > This allows more performance by not requiring an indirection per pixel > > read. This patch is focused on readability of the code. > > > > Line-by-line composition was introduced by [1] but rewritten back to > > pixel-by-pixel algorithm in [2]. At this time, nobody noticed the impact > > on performance, and it was merged. > > > > This patch is almost a revert of [2], but in addition efforts have been > > made to increase readability and maintainability of the rotation handling. > > The blend function is now divided in two parts: > > - Transformation of coordinates from the output referential to the source > > referential > > - Line conversion and blending > > > > Most of the complexity of the rotation management is avoided by using > > drm_rect_* helpers. The remaining complexity is around the clipping, to > > avoid reading/writing outside source/destination buffers. > > > > The pixel conversion is now done line-by-line, so the read_pixel_t was > > replaced with read_pixel_line_t callback. This way the indirection is only > > required once per line and per plane, instead of once per pixel and per > > plane. > > > > The read_line_t callbacks are very similar for most pixel format, but it > > is required to avoid performance impact. Some helpers for color > > conversion were introduced to avoid code repetition: > > - *_to_argb_u16: perform colors conversion. They should be inlined by the > > compiler, and they are used to avoid repetition between multiple variants > > of the same format (argb/xrgb and maybe in the future for formats like > > bgr formats). > > > > This new algorithm was tested with: > > - kms_plane (for color conversions) > > - kms_rotation_crc (for rotations of planes) > > - kms_cursor_crc (for translations of planes) > > - kms_rotation (for all rotations and formats combinations) [3] > > The performance gain was mesured with kms_fb_stress [4] with some > > modification to fix the writeback format. > > > > The performance improvement is around 5 to 10%. > > > > [1]: commit 8ba1648567e2 ("drm: vkms: Refactor the plane composer to accept > > new formats") > > https://lore.kernel.org/all/20220905190811.25024-7-igormtorrente@gmail.com/ > > [2]: commit 322d716a3e8a ("drm/vkms: isolate pixel conversion > > functionality") > > https://lore.kernel.org/all/20230418130525.128733-2-mcanal@igalia.com/ > > [3]: https://lore.kernel.org/igt-dev/20240313-new_rotation-v2-0-6230fd5cae59@bootlin.com/ > > [4]: https://lore.kernel.org/all/20240422-kms_fb_stress-dev-v5-0-0c577163dc88@riseup.net/ > > > > Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com> > > Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> > > > > # Conflicts: > > # drivers/gpu/drm/vkms/vkms_composer.c I jut noticed this, I will remove it... > > --- > > drivers/gpu/drm/vkms/vkms_composer.c | 234 ++++++++++++++++++++++++++++------- > > drivers/gpu/drm/vkms/vkms_drv.h | 28 +++-- > > drivers/gpu/drm/vkms/vkms_formats.c | 224 ++++++++++++++++++++------------- > > drivers/gpu/drm/vkms/vkms_formats.h | 2 +- > > drivers/gpu/drm/vkms/vkms_plane.c | 5 +- > > 5 files changed, 344 insertions(+), 149 deletions(-) > > > > [...] > > > -static void RGB565_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16 *out_pixel) > > +static struct pixel_argb_u16 argb_u16_from_RGB565(const __le16 *pixel) > > { > > - __le16 *pixel = (__le16 *)in_pixel; > > + struct pixel_argb_u16 out_pixel; > > s64 fp_rb_ratio = drm_fixp_div(drm_int2fixp(65535), drm_int2fixp(31)); > > s64 fp_g_ratio = drm_fixp_div(drm_int2fixp(65535), drm_int2fixp(63)); > > @@ -226,40 +194,120 @@ static void RGB565_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16 *out_pi > > s64 fp_g = drm_int2fixp((rgb_565 >> 5) & 0x3f); > > s64 fp_b = drm_int2fixp(rgb_565 & 0x1f); > > - out_pixel->a = (u16)0xffff; > > - out_pixel->r = drm_fixp2int_round(drm_fixp_mul(fp_r, fp_rb_ratio)); > > - out_pixel->g = drm_fixp2int_round(drm_fixp_mul(fp_g, fp_g_ratio)); > > - out_pixel->b = drm_fixp2int_round(drm_fixp_mul(fp_b, fp_rb_ratio)); > > + out_pixel.a = (u16)0xffff; > > + out_pixel.r = drm_fixp2int_round(drm_fixp_mul(fp_r, fp_rb_ratio)); > > + out_pixel.g = drm_fixp2int_round(drm_fixp_mul(fp_g, fp_g_ratio)); > > + out_pixel.b = drm_fixp2int_round(drm_fixp_mul(fp_b, fp_rb_ratio)); > > + > > + return out_pixel; > > } > > -/** > > - * vkms_compose_row - compose a single row of a plane > > - * @stage_buffer: output line with the composed pixels > > - * @plane: state of the plane that is being composed > > - * @y: y coordinate of the row > > +/* > > + * The following functions are read_line function for each pixel format supported by VKMS. > > + * > > + * They read a line starting at the point @x_start,@y_start following the @direction. The result > > + * is stored in @out_pixel and in the format ARGB16161616. > > + * > > + * These functions are very repetitive, but the innermost pixel loops must be kept inside these > > + * functions for performance reasons. Some benchmarking was done in [1] where having the innermost > > + * loop factored out of these functions showed a slowdown by a factor of three. > > * > > - * This function composes a single row of a plane. It gets the source pixels > > - * through the y coordinate (see get_packed_src_addr()) and goes linearly > > - * through the source pixel, reading the pixels and converting it to > > - * ARGB16161616 (see the pixel_read() callback). For rotate-90 and rotate-270, > > - * the source pixels are not traversed linearly. The source pixels are queried > > - * on each iteration in order to traverse the pixels vertically. > > + * [1]: https://lore.kernel.org/dri-devel/d258c8dc-78e9-4509-9037-a98f7f33b3a3@riseup.net/ > > */ > > -void vkms_compose_row(struct line_buffer *stage_buffer, struct vkms_plane_state *plane, int y) > > + > > +static void ARGB8888_read_line(const struct vkms_plane_state *plane, int x_start, int y_start, > > + enum pixel_read_direction direction, int count, > > + struct pixel_argb_u16 out_pixel[]) > > { > > - struct pixel_argb_u16 *out_pixels = stage_buffer->pixels; > > - struct vkms_frame_info *frame_info = plane->frame_info; > > - u8 *src_pixels = get_packed_src_addr(frame_info, y, 0); > > - int limit = min_t(size_t, drm_rect_width(&frame_info->dst), stage_buffer->n_pixels); > > + struct pixel_argb_u16 *end = out_pixel + count; > > + u8 *src_pixels; > > + > > + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); > > + > > + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); > > + > > + while (out_pixel < end) { > > + u8 *px = (u8 *)src_pixels; > > Why are you converting u8* to u8*? There are repetitions of this pattern > in this patch. I think it was to be consistent between all the conversion functions. They are exactly the same, so having the casting (even useless one) at the same place may help to understand the code. I will remove this cast if you prefer. > > + *out_pixel = argb_u16_from_u8888(px[3], px[2], px[1], px[0]); > > + out_pixel += 1; > > + src_pixels += step; > > + } > > +} > > + > > +static void XRGB8888_read_line(const struct vkms_plane_state *plane, int x_start, int y_start, > > + enum pixel_read_direction direction, int count, > > + struct pixel_argb_u16 out_pixel[]) > > +{ > > + struct pixel_argb_u16 *end = out_pixel + count; > > + u8 *src_pixels; > > + > > + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); > > + > > + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); > > + > > + while (out_pixel < end) { > > + u8 *px = (u8 *)src_pixels; > > + *out_pixel = argb_u16_from_u8888(255, px[2], px[1], px[0]); > > + out_pixel += 1; > > + src_pixels += step; > > + } > > +} > > + > > +static void ARGB16161616_read_line(const struct vkms_plane_state *plane, int x_start, > > + int y_start, enum pixel_read_direction direction, int count, > > + struct pixel_argb_u16 out_pixel[]) > > +{ > > + struct pixel_argb_u16 *end = out_pixel + count; > > + u8 *src_pixels; > > + > > + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); > > + > > + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); > > + > > + while (out_pixel < end) { > > + u16 *px = (u16 *)src_pixels; > > + *out_pixel = argb_u16_from_u16161616(px[3], px[2], px[1], px[0]); > > + out_pixel += 1; > > + src_pixels += step; > > + } > > +} > > + > > +static void XRGB16161616_read_line(const struct vkms_plane_state *plane, int x_start, > > + int y_start, enum pixel_read_direction direction, int count, > > + struct pixel_argb_u16 out_pixel[]) > > +{ > > + struct pixel_argb_u16 *end = out_pixel + count; > > + u8 *src_pixels; > > + > > + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); > > + > > + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); > > + > > + while (out_pixel < end) { > > + __le16 *px = (__le16 *)src_pixels; > > + *out_pixel = argb_u16_from_le16161616(cpu_to_le16(0xFFFF), px[2], px[1], px[0]); > > + out_pixel += 1; > > + src_pixels += step; > > + } > > +} > > + > > +static void RGB565_read_line(const struct vkms_plane_state *plane, int x_start, > > + int y_start, enum pixel_read_direction direction, int count, > > + struct pixel_argb_u16 out_pixel[]) > > +{ > > + struct pixel_argb_u16 *end = out_pixel + count; > > + u8 *src_pixels; > > + > > + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); > > - for (size_t x = 0; x < limit; x++, src_pixels += frame_info->fb->format->cpp[0]) { > > - int x_pos = get_x_position(frame_info, limit, x); > > + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); > > - if (drm_rotation_90_or_270(frame_info->rotation)) > > - src_pixels = get_packed_src_addr(frame_info, x + frame_info->rotated.y1, 0) > > - + frame_info->fb->format->cpp[0] * y; > > + while (out_pixel < end) { > > + __le16 *px = (__le16 *)src_pixels; > > - plane->pixel_read(src_pixels, &out_pixels[x_pos]); > > + *out_pixel = argb_u16_from_RGB565(px); > > + out_pixel += 1; > > + src_pixels += step; > > } > > } > > @@ -359,25 +407,25 @@ void vkms_writeback_row(struct vkms_writeback_job *wb, > > } > > /** > > - * get_pixel_read_function() - Retrieve the correct read_pixel function for a specific > > + * get_pixel_read_line_function() - Retrieve the correct read_line function for a specific > > * format. The returned pointer is NULL for unsupported pixel formats. The caller must ensure that > > * the pointer is valid before using it in a vkms_plane_state. > > * > > * @format: DRM_FORMAT_* value for which to obtain a conversion function (see [drm_fourcc.h]) > > */ > > -pixel_read_t get_pixel_read_function(u32 format) > > +pixel_read_line_t get_pixel_read_line_function(u32 format) > > { > > switch (format) { > > case DRM_FORMAT_ARGB8888: > > - return &ARGB8888_to_argb_u16; > > + return &ARGB8888_read_line; > > case DRM_FORMAT_XRGB8888: > > - return &XRGB8888_to_argb_u16; > > + return &XRGB8888_read_line; > > case DRM_FORMAT_ARGB16161616: > > - return &ARGB16161616_to_argb_u16; > > + return &ARGB16161616_read_line; > > case DRM_FORMAT_XRGB16161616: > > - return &XRGB16161616_to_argb_u16; > > + return &XRGB16161616_read_line; > > case DRM_FORMAT_RGB565: > > - return &RGB565_to_argb_u16; > > + return &RGB565_read_line; > > default: > > /* > > * This is a bug in vkms_plane_atomic_check(). All the supported > > diff --git a/drivers/gpu/drm/vkms/vkms_formats.h b/drivers/gpu/drm/vkms/vkms_formats.h > > index 3ecea4563254..8d2bef95ff79 100644 > > --- a/drivers/gpu/drm/vkms/vkms_formats.h > > +++ b/drivers/gpu/drm/vkms/vkms_formats.h > > @@ -5,7 +5,7 @@ > > #include "vkms_drv.h" > > -pixel_read_t get_pixel_read_function(u32 format); > > +pixel_read_line_t get_pixel_read_line_function(u32 format); > > pixel_write_t get_pixel_write_function(u32 format); > > diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c > > index 10e9b23dab28..8875bed76410 100644 > > --- a/drivers/gpu/drm/vkms/vkms_plane.c > > +++ b/drivers/gpu/drm/vkms/vkms_plane.c > > @@ -112,7 +112,6 @@ static void vkms_plane_atomic_update(struct drm_plane *plane, > > frame_info = vkms_plane_state->frame_info; > > memcpy(&frame_info->src, &new_state->src, sizeof(struct drm_rect)); > > memcpy(&frame_info->dst, &new_state->dst, sizeof(struct drm_rect)); > > - memcpy(&frame_info->rotated, &new_state->dst, sizeof(struct drm_rect)); > > If you won't use rotated anymore, delete it from the struct. It is already done in this patch. Thanks for your reviews, Louis Chauvet > Best Regards, > - Maíra > > > frame_info->fb = fb; > > memcpy(&frame_info->map, &shadow_plane_state->data, sizeof(frame_info->map)); > > drm_framebuffer_get(frame_info->fb); > > @@ -122,10 +121,8 @@ static void vkms_plane_atomic_update(struct drm_plane *plane, > > DRM_MODE_REFLECT_X | > > DRM_MODE_REFLECT_Y); > > - drm_rect_rotate(&frame_info->rotated, drm_rect_width(&frame_info->rotated), > > - drm_rect_height(&frame_info->rotated), frame_info->rotation); > > - vkms_plane_state->pixel_read = get_pixel_read_function(fmt); > > + vkms_plane_state->pixel_read_line = get_pixel_read_line_function(fmt); > > } > > static int vkms_plane_atomic_check(struct drm_plane *plane, > >
Hi Louis, On 28/10/24 06:50, Louis Chauvet wrote: > On 26/10/24 - 11:26, Maíra Canal wrote: >> Hi Louis, >> >> On 07/10/24 13:10, Louis Chauvet wrote: >>> Re-introduce a line-by-line composition algorithm for each pixel format. >>> This allows more performance by not requiring an indirection per pixel >>> read. This patch is focused on readability of the code. >>> >>> Line-by-line composition was introduced by [1] but rewritten back to >>> pixel-by-pixel algorithm in [2]. At this time, nobody noticed the impact >>> on performance, and it was merged. >>> >>> This patch is almost a revert of [2], but in addition efforts have been >>> made to increase readability and maintainability of the rotation handling. >>> The blend function is now divided in two parts: >>> - Transformation of coordinates from the output referential to the source >>> referential >>> - Line conversion and blending >>> >>> Most of the complexity of the rotation management is avoided by using >>> drm_rect_* helpers. The remaining complexity is around the clipping, to >>> avoid reading/writing outside source/destination buffers. >>> >>> The pixel conversion is now done line-by-line, so the read_pixel_t was >>> replaced with read_pixel_line_t callback. This way the indirection is only >>> required once per line and per plane, instead of once per pixel and per >>> plane. >>> >>> The read_line_t callbacks are very similar for most pixel format, but it >>> is required to avoid performance impact. Some helpers for color >>> conversion were introduced to avoid code repetition: >>> - *_to_argb_u16: perform colors conversion. They should be inlined by the >>> compiler, and they are used to avoid repetition between multiple variants >>> of the same format (argb/xrgb and maybe in the future for formats like >>> bgr formats). >>> >>> This new algorithm was tested with: >>> - kms_plane (for color conversions) >>> - kms_rotation_crc (for rotations of planes) >>> - kms_cursor_crc (for translations of planes) >>> - kms_rotation (for all rotations and formats combinations) [3] >>> The performance gain was mesured with kms_fb_stress [4] with some >>> modification to fix the writeback format. >>> >>> The performance improvement is around 5 to 10%. >>> >>> [1]: commit 8ba1648567e2 ("drm: vkms: Refactor the plane composer to accept >>> new formats") >>> https://lore.kernel.org/all/20220905190811.25024-7-igormtorrente@gmail.com/ >>> [2]: commit 322d716a3e8a ("drm/vkms: isolate pixel conversion >>> functionality") >>> https://lore.kernel.org/all/20230418130525.128733-2-mcanal@igalia.com/ >>> [3]: https://lore.kernel.org/igt-dev/20240313-new_rotation-v2-0-6230fd5cae59@bootlin.com/ >>> [4]: https://lore.kernel.org/all/20240422-kms_fb_stress-dev-v5-0-0c577163dc88@riseup.net/ >>> >>> Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com> >>> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> >>> >>> # Conflicts: >>> # drivers/gpu/drm/vkms/vkms_composer.c > > I jut noticed this, I will remove it... > >>> --- >>> drivers/gpu/drm/vkms/vkms_composer.c | 234 ++++++++++++++++++++++++++++------- >>> drivers/gpu/drm/vkms/vkms_drv.h | 28 +++-- >>> drivers/gpu/drm/vkms/vkms_formats.c | 224 ++++++++++++++++++++------------- >>> drivers/gpu/drm/vkms/vkms_formats.h | 2 +- >>> drivers/gpu/drm/vkms/vkms_plane.c | 5 +- >>> 5 files changed, 344 insertions(+), 149 deletions(-) >>> >> >> [...] >> >>> -static void RGB565_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16 *out_pixel) >>> +static struct pixel_argb_u16 argb_u16_from_RGB565(const __le16 *pixel) >>> { >>> - __le16 *pixel = (__le16 *)in_pixel; >>> + struct pixel_argb_u16 out_pixel; >>> s64 fp_rb_ratio = drm_fixp_div(drm_int2fixp(65535), drm_int2fixp(31)); >>> s64 fp_g_ratio = drm_fixp_div(drm_int2fixp(65535), drm_int2fixp(63)); >>> @@ -226,40 +194,120 @@ static void RGB565_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16 *out_pi >>> s64 fp_g = drm_int2fixp((rgb_565 >> 5) & 0x3f); >>> s64 fp_b = drm_int2fixp(rgb_565 & 0x1f); >>> - out_pixel->a = (u16)0xffff; >>> - out_pixel->r = drm_fixp2int_round(drm_fixp_mul(fp_r, fp_rb_ratio)); >>> - out_pixel->g = drm_fixp2int_round(drm_fixp_mul(fp_g, fp_g_ratio)); >>> - out_pixel->b = drm_fixp2int_round(drm_fixp_mul(fp_b, fp_rb_ratio)); >>> + out_pixel.a = (u16)0xffff; >>> + out_pixel.r = drm_fixp2int_round(drm_fixp_mul(fp_r, fp_rb_ratio)); >>> + out_pixel.g = drm_fixp2int_round(drm_fixp_mul(fp_g, fp_g_ratio)); >>> + out_pixel.b = drm_fixp2int_round(drm_fixp_mul(fp_b, fp_rb_ratio)); >>> + >>> + return out_pixel; >>> } >>> -/** >>> - * vkms_compose_row - compose a single row of a plane >>> - * @stage_buffer: output line with the composed pixels >>> - * @plane: state of the plane that is being composed >>> - * @y: y coordinate of the row >>> +/* >>> + * The following functions are read_line function for each pixel format supported by VKMS. >>> + * >>> + * They read a line starting at the point @x_start,@y_start following the @direction. The result >>> + * is stored in @out_pixel and in the format ARGB16161616. >>> + * >>> + * These functions are very repetitive, but the innermost pixel loops must be kept inside these >>> + * functions for performance reasons. Some benchmarking was done in [1] where having the innermost >>> + * loop factored out of these functions showed a slowdown by a factor of three. >>> * >>> - * This function composes a single row of a plane. It gets the source pixels >>> - * through the y coordinate (see get_packed_src_addr()) and goes linearly >>> - * through the source pixel, reading the pixels and converting it to >>> - * ARGB16161616 (see the pixel_read() callback). For rotate-90 and rotate-270, >>> - * the source pixels are not traversed linearly. The source pixels are queried >>> - * on each iteration in order to traverse the pixels vertically. >>> + * [1]: https://lore.kernel.org/dri-devel/d258c8dc-78e9-4509-9037-a98f7f33b3a3@riseup.net/ >>> */ >>> -void vkms_compose_row(struct line_buffer *stage_buffer, struct vkms_plane_state *plane, int y) >>> + >>> +static void ARGB8888_read_line(const struct vkms_plane_state *plane, int x_start, int y_start, >>> + enum pixel_read_direction direction, int count, >>> + struct pixel_argb_u16 out_pixel[]) >>> { >>> - struct pixel_argb_u16 *out_pixels = stage_buffer->pixels; >>> - struct vkms_frame_info *frame_info = plane->frame_info; >>> - u8 *src_pixels = get_packed_src_addr(frame_info, y, 0); >>> - int limit = min_t(size_t, drm_rect_width(&frame_info->dst), stage_buffer->n_pixels); >>> + struct pixel_argb_u16 *end = out_pixel + count; >>> + u8 *src_pixels; >>> + >>> + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); >>> + >>> + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); >>> + >>> + while (out_pixel < end) { >>> + u8 *px = (u8 *)src_pixels; >> >> Why are you converting u8* to u8*? There are repetitions of this pattern >> in this patch. > > I think it was to be consistent between all the conversion functions. They > are exactly the same, so having the casting (even useless one) at the same > place may help to understand the code. > > I will remove this cast if you prefer. I only suggested to remove as we are going to delete this function when we push [1]. So, I believe it's better to add as little code as possible. [1] https://lore.kernel.org/all/20241007-b4-new-color-formats-v2-0-d47da50d4674@bootlin.com/ Best Regards, - Maíra > >>> + *out_pixel = argb_u16_from_u8888(px[3], px[2], px[1], px[0]); >>> + out_pixel += 1; >>> + src_pixels += step; >>> + } >>> +} >>> + >>> +static void XRGB8888_read_line(const struct vkms_plane_state *plane, int x_start, int y_start, >>> + enum pixel_read_direction direction, int count, >>> + struct pixel_argb_u16 out_pixel[]) >>> +{ >>> + struct pixel_argb_u16 *end = out_pixel + count; >>> + u8 *src_pixels; >>> + >>> + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); >>> + >>> + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); >>> + >>> + while (out_pixel < end) { >>> + u8 *px = (u8 *)src_pixels; >>> + *out_pixel = argb_u16_from_u8888(255, px[2], px[1], px[0]); >>> + out_pixel += 1; >>> + src_pixels += step; >>> + } >>> +} >>> + >>> +static void ARGB16161616_read_line(const struct vkms_plane_state *plane, int x_start, >>> + int y_start, enum pixel_read_direction direction, int count, >>> + struct pixel_argb_u16 out_pixel[]) >>> +{ >>> + struct pixel_argb_u16 *end = out_pixel + count; >>> + u8 *src_pixels; >>> + >>> + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); >>> + >>> + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); >>> + >>> + while (out_pixel < end) { >>> + u16 *px = (u16 *)src_pixels; >>> + *out_pixel = argb_u16_from_u16161616(px[3], px[2], px[1], px[0]); >>> + out_pixel += 1; >>> + src_pixels += step; >>> + } >>> +} >>> + >>> +static void XRGB16161616_read_line(const struct vkms_plane_state *plane, int x_start, >>> + int y_start, enum pixel_read_direction direction, int count, >>> + struct pixel_argb_u16 out_pixel[]) >>> +{ >>> + struct pixel_argb_u16 *end = out_pixel + count; >>> + u8 *src_pixels; >>> + >>> + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); >>> + >>> + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); >>> + >>> + while (out_pixel < end) { >>> + __le16 *px = (__le16 *)src_pixels; >>> + *out_pixel = argb_u16_from_le16161616(cpu_to_le16(0xFFFF), px[2], px[1], px[0]); >>> + out_pixel += 1; >>> + src_pixels += step; >>> + } >>> +} >>> + >>> +static void RGB565_read_line(const struct vkms_plane_state *plane, int x_start, >>> + int y_start, enum pixel_read_direction direction, int count, >>> + struct pixel_argb_u16 out_pixel[]) >>> +{ >>> + struct pixel_argb_u16 *end = out_pixel + count; >>> + u8 *src_pixels; >>> + >>> + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); >>> - for (size_t x = 0; x < limit; x++, src_pixels += frame_info->fb->format->cpp[0]) { >>> - int x_pos = get_x_position(frame_info, limit, x); >>> + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); >>> - if (drm_rotation_90_or_270(frame_info->rotation)) >>> - src_pixels = get_packed_src_addr(frame_info, x + frame_info->rotated.y1, 0) >>> - + frame_info->fb->format->cpp[0] * y; >>> + while (out_pixel < end) { >>> + __le16 *px = (__le16 *)src_pixels; >>> - plane->pixel_read(src_pixels, &out_pixels[x_pos]); >>> + *out_pixel = argb_u16_from_RGB565(px); >>> + out_pixel += 1; >>> + src_pixels += step; >>> } >>> } >>> @@ -359,25 +407,25 @@ void vkms_writeback_row(struct vkms_writeback_job *wb, >>> } >>> /** >>> - * get_pixel_read_function() - Retrieve the correct read_pixel function for a specific >>> + * get_pixel_read_line_function() - Retrieve the correct read_line function for a specific >>> * format. The returned pointer is NULL for unsupported pixel formats. The caller must ensure that >>> * the pointer is valid before using it in a vkms_plane_state. >>> * >>> * @format: DRM_FORMAT_* value for which to obtain a conversion function (see [drm_fourcc.h]) >>> */ >>> -pixel_read_t get_pixel_read_function(u32 format) >>> +pixel_read_line_t get_pixel_read_line_function(u32 format) >>> { >>> switch (format) { >>> case DRM_FORMAT_ARGB8888: >>> - return &ARGB8888_to_argb_u16; >>> + return &ARGB8888_read_line; >>> case DRM_FORMAT_XRGB8888: >>> - return &XRGB8888_to_argb_u16; >>> + return &XRGB8888_read_line; >>> case DRM_FORMAT_ARGB16161616: >>> - return &ARGB16161616_to_argb_u16; >>> + return &ARGB16161616_read_line; >>> case DRM_FORMAT_XRGB16161616: >>> - return &XRGB16161616_to_argb_u16; >>> + return &XRGB16161616_read_line; >>> case DRM_FORMAT_RGB565: >>> - return &RGB565_to_argb_u16; >>> + return &RGB565_read_line; >>> default: >>> /* >>> * This is a bug in vkms_plane_atomic_check(). All the supported >>> diff --git a/drivers/gpu/drm/vkms/vkms_formats.h b/drivers/gpu/drm/vkms/vkms_formats.h >>> index 3ecea4563254..8d2bef95ff79 100644 >>> --- a/drivers/gpu/drm/vkms/vkms_formats.h >>> +++ b/drivers/gpu/drm/vkms/vkms_formats.h >>> @@ -5,7 +5,7 @@ >>> #include "vkms_drv.h" >>> -pixel_read_t get_pixel_read_function(u32 format); >>> +pixel_read_line_t get_pixel_read_line_function(u32 format); >>> pixel_write_t get_pixel_write_function(u32 format); >>> diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c >>> index 10e9b23dab28..8875bed76410 100644 >>> --- a/drivers/gpu/drm/vkms/vkms_plane.c >>> +++ b/drivers/gpu/drm/vkms/vkms_plane.c >>> @@ -112,7 +112,6 @@ static void vkms_plane_atomic_update(struct drm_plane *plane, >>> frame_info = vkms_plane_state->frame_info; >>> memcpy(&frame_info->src, &new_state->src, sizeof(struct drm_rect)); >>> memcpy(&frame_info->dst, &new_state->dst, sizeof(struct drm_rect)); >>> - memcpy(&frame_info->rotated, &new_state->dst, sizeof(struct drm_rect)); >> >> If you won't use rotated anymore, delete it from the struct. > > It is already done in this patch. > > Thanks for your reviews, > Louis Chauvet > >> Best Regards, >> - Maíra >> >>> frame_info->fb = fb; >>> memcpy(&frame_info->map, &shadow_plane_state->data, sizeof(frame_info->map)); >>> drm_framebuffer_get(frame_info->fb); >>> @@ -122,10 +121,8 @@ static void vkms_plane_atomic_update(struct drm_plane *plane, >>> DRM_MODE_REFLECT_X | >>> DRM_MODE_REFLECT_Y); >>> - drm_rect_rotate(&frame_info->rotated, drm_rect_width(&frame_info->rotated), >>> - drm_rect_height(&frame_info->rotated), frame_info->rotation); >>> - vkms_plane_state->pixel_read = get_pixel_read_function(fmt); >>> + vkms_plane_state->pixel_read_line = get_pixel_read_line_function(fmt); >>> } >>> static int vkms_plane_atomic_check(struct drm_plane *plane, >>>
diff --git a/drivers/gpu/drm/vkms/vkms_composer.c b/drivers/gpu/drm/vkms/vkms_composer.c index 601e33431b45..7a3e47b895a7 100644 --- a/drivers/gpu/drm/vkms/vkms_composer.c +++ b/drivers/gpu/drm/vkms/vkms_composer.c @@ -29,8 +29,8 @@ static u16 pre_mul_blend_channel(u16 src, u16 dst, u16 alpha) * @x_start: The start offset * @pixel_count: The number of pixels to blend * - * The pixels [0;@pixel_count) in stage_buffer are blended at [@x_start;@x_start+@pixel_count) in - * output_buffer. + * The pixels [@x_start;@x_start+@pixel_count) in stage_buffer are blended at + * [@x_start;@x_start+@pixel_count) in output_buffer. * * The current DRM assumption is that pixel color values have been already * pre-multiplied with the alpha channel values. See more @@ -41,7 +41,7 @@ static void pre_mul_alpha_blend(const struct line_buffer *stage_buffer, struct line_buffer *output_buffer, int x_start, int pixel_count) { struct pixel_argb_u16 *out = &output_buffer->pixels[x_start]; - const struct pixel_argb_u16 *in = stage_buffer->pixels; + const struct pixel_argb_u16 *in = &stage_buffer->pixels[x_start]; for (int i = 0; i < pixel_count; i++) { out[i].a = (u16)0xffff; @@ -51,33 +51,6 @@ static void pre_mul_alpha_blend(const struct line_buffer *stage_buffer, } } -static int get_y_pos(struct vkms_frame_info *frame_info, int y) -{ - if (frame_info->rotation & DRM_MODE_REFLECT_Y) - return drm_rect_height(&frame_info->rotated) - y - 1; - - switch (frame_info->rotation & DRM_MODE_ROTATE_MASK) { - case DRM_MODE_ROTATE_90: - return frame_info->rotated.x2 - y - 1; - case DRM_MODE_ROTATE_270: - return y + frame_info->rotated.x1; - default: - return y; - } -} - -static bool check_limit(struct vkms_frame_info *frame_info, int pos) -{ - if (drm_rotation_90_or_270(frame_info->rotation)) { - if (pos >= 0 && pos < drm_rect_width(&frame_info->rotated)) - return true; - } else { - if (pos >= frame_info->rotated.y1 && pos < frame_info->rotated.y2) - return true; - } - - return false; -} static void fill_background(const struct pixel_argb_u16 *background_color, struct line_buffer *output_buffer) @@ -203,6 +176,182 @@ static enum pixel_read_direction direction_for_rotation(unsigned int rotation) return READ_LEFT_TO_RIGHT; } +/** + * clamp_line_coordinates() - Compute and clamp the coordinate to read and write during the blend + * process. + * + * @direction: direction of the reading + * @current_plane: current plane blended + * @src_line: source line of the reading. Only the top-left coordinate is used. This rectangle + * must be rotated and have a shape of 1*pixel_count if @direction is vertical and a shape of + * pixel_count*1 if @direction is horizontal. + * @src_x_start: x start coordinate for the line reading + * @src_y_start: y start coordinate for the line reading + * @dst_x_start: x coordinate to blend the read line + * @pixel_count: number of pixels to blend + * + * This function is mainly a safety net to avoid reading outside the source buffer. As the + * userspace should never ask to read outside the source plane, all the cases covered here should + * be dead code. + */ +static void clamp_line_coordinates(enum pixel_read_direction direction, + const struct vkms_plane_state *current_plane, + const struct drm_rect *src_line, int *src_x_start, + int *src_y_start, int *dst_x_start, int *pixel_count) +{ + /* By default the start points are correct */ + *src_x_start = src_line->x1; + *src_y_start = src_line->y1; + *dst_x_start = current_plane->frame_info->dst.x1; + + /* Get the correct number of pixel to blend, it depends of the direction */ + switch (direction) { + case READ_LEFT_TO_RIGHT: + case READ_RIGHT_TO_LEFT: + *pixel_count = drm_rect_width(src_line); + break; + case READ_BOTTOM_TO_TOP: + case READ_TOP_TO_BOTTOM: + *pixel_count = drm_rect_height(src_line); + break; + } + + /* + * Clamp the coordinates to avoid reading outside the buffer + * + * This is mainly a security check to avoid reading outside the buffer, the userspace + * should never request to read outside the source buffer. + */ + switch (direction) { + case READ_LEFT_TO_RIGHT: + case READ_RIGHT_TO_LEFT: + if (*src_x_start < 0) { + *pixel_count += *src_x_start; + *dst_x_start -= *src_x_start; + *src_x_start = 0; + } + if (*src_x_start + *pixel_count > current_plane->frame_info->fb->width) + *pixel_count = max(0, (int)current_plane->frame_info->fb->width - + *src_x_start); + break; + case READ_BOTTOM_TO_TOP: + case READ_TOP_TO_BOTTOM: + if (*src_y_start < 0) { + *pixel_count += *src_y_start; + *dst_x_start -= *src_y_start; + *src_y_start = 0; + } + if (*src_y_start + *pixel_count > current_plane->frame_info->fb->height) + *pixel_count = max(0, (int)current_plane->frame_info->fb->height - + *src_y_start); + break; + } +} + +/** + * blend_line() - Blend a line from a plane to the output buffer + * + * @current_plane: current plane to work on + * @y: line to write in the output buffer + * @crtc_x_limit: width of the output buffer + * @stage_buffer: temporary buffer to convert the pixel line from the source buffer + * @output_buffer: buffer to blend the read line into. + */ +static void blend_line(struct vkms_plane_state *current_plane, int y, + int crtc_x_limit, struct line_buffer *stage_buffer, + struct line_buffer *output_buffer) +{ + int src_x_start, src_y_start, dst_x_start, pixel_count; + struct drm_rect dst_line, tmp_src, src_line; + + /* Avoid rendering useless lines */ + if (y < current_plane->frame_info->dst.y1 || + y >= current_plane->frame_info->dst.y2) + return; + + /* + * dst_line is the line to copy. The initial coordinates are inside the + * destination framebuffer, and then drm_rect_* helpers are used to + * compute the correct position into the source framebuffer. + */ + dst_line = DRM_RECT_INIT(current_plane->frame_info->dst.x1, y, + drm_rect_width(¤t_plane->frame_info->dst), + 1); + + drm_rect_fp_to_int(&tmp_src, ¤t_plane->frame_info->src); + + /* + * [1]: Clamping src_line to the crtc_x_limit to avoid writing outside of + * the destination buffer + */ + dst_line.x1 = max_t(int, dst_line.x1, 0); + dst_line.x2 = min_t(int, dst_line.x2, crtc_x_limit); + /* The destination is completely outside of the crtc. */ + if (dst_line.x2 <= dst_line.x1) + return; + + src_line = dst_line; + + /* + * Transform the coordinate x/y from the crtc to coordinates into + * coordinates for the src buffer. + * + * - Cancel the offset of the dst buffer. + * - Invert the rotation. This assumes that + * dst = drm_rect_rotate(src, rotation) (dst and src have the + * same size, but can be rotated). + * - Apply the offset of the source rectangle to the coordinate. + */ + drm_rect_translate(&src_line, -current_plane->frame_info->dst.x1, + -current_plane->frame_info->dst.y1); + drm_rect_rotate_inv(&src_line, drm_rect_width(&tmp_src), + drm_rect_height(&tmp_src), + current_plane->frame_info->rotation); + drm_rect_translate(&src_line, tmp_src.x1, tmp_src.y1); + + /* Get the correct reading direction in the source buffer. */ + + enum pixel_read_direction direction = + direction_for_rotation(current_plane->frame_info->rotation); + + /* [2]: Compute and clamp the number of pixel to read */ + clamp_line_coordinates(direction, current_plane, &src_line, &src_x_start, &src_y_start, + &dst_x_start, &pixel_count); + + if (pixel_count <= 0) { + /* Nothing to read, so avoid multiple function calls */ + return; + } + + /* + * Modify the starting point to take in account the rotation + * + * src_line is the top-left corner, so when reading READ_RIGHT_TO_LEFT or + * READ_BOTTOM_TO_TOP, it must be changed to the top-right/bottom-left + * corner. + */ + if (direction == READ_RIGHT_TO_LEFT) { + // src_x_start is now the right point + src_x_start += pixel_count - 1; + } else if (direction == READ_BOTTOM_TO_TOP) { + // src_y_start is now the bottom point + src_y_start += pixel_count - 1; + } + + /* + * Perform the conversion and the blending + * + * Here we know that the read line (x_start, y_start, pixel_count) is + * inside the source buffer [2] and we don't write outside the stage + * buffer [1]. + */ + current_plane->pixel_read_line(current_plane, src_x_start, src_y_start, direction, + pixel_count, &stage_buffer->pixels[dst_x_start]); + + pre_mul_alpha_blend(stage_buffer, output_buffer, + dst_x_start, pixel_count); +} + /** * blend - blend the pixels from all planes and compute crc * @wb: The writeback frame buffer metadata @@ -223,34 +372,25 @@ static void blend(struct vkms_writeback_job *wb, { struct vkms_plane_state **plane = crtc_state->active_planes; u32 n_active_planes = crtc_state->num_active_planes; - int y_pos, x_dst, pixel_count; const struct pixel_argb_u16 background_color = { .a = 0xffff }; - size_t crtc_y_limit = crtc_state->base.crtc->mode.vdisplay; + int crtc_y_limit = crtc_state->base.crtc->mode.vdisplay; + int crtc_x_limit = crtc_state->base.crtc->mode.hdisplay; /* * The planes are composed line-by-line to avoid heavy memory usage. It is a necessary * complexity to avoid poor blending performance. * - * The function vkms_compose_row() is used to read a line, pixel-by-pixel, into the staging - * buffer. + * The function pixel_read_line callback is used to read a line, using an efficient + * algorithm for a specific format, into the staging buffer. */ - for (size_t y = 0; y < crtc_y_limit; y++) { + for (int y = 0; y < crtc_y_limit; y++) { fill_background(&background_color, output_buffer); /* The active planes are composed associatively in z-order. */ for (size_t i = 0; i < n_active_planes; i++) { - x_dst = plane[i]->frame_info->dst.x1; - pixel_count = min_t(int, drm_rect_width(&plane[i]->frame_info->dst), - (int)stage_buffer->n_pixels); - y_pos = get_y_pos(plane[i]->frame_info, y); - - if (!check_limit(plane[i]->frame_info, y_pos)) - continue; - - vkms_compose_row(stage_buffer, plane[i], y_pos); - pre_mul_alpha_blend(stage_buffer, output_buffer, x_dst, pixel_count); + blend_line(plane[i], y, crtc_x_limit, stage_buffer, output_buffer); } apply_lut(crtc_state, output_buffer); @@ -258,7 +398,7 @@ static void blend(struct vkms_writeback_job *wb, *crc32 = crc32_le(*crc32, (void *)output_buffer->pixels, row_size); if (wb) - vkms_writeback_row(wb, output_buffer, y_pos); + vkms_writeback_row(wb, output_buffer, y); } } @@ -269,7 +409,7 @@ static int check_format_funcs(struct vkms_crtc_state *crtc_state, u32 n_active_planes = crtc_state->num_active_planes; for (size_t i = 0; i < n_active_planes; i++) - if (!planes[i]->pixel_read) + if (!planes[i]->pixel_read_line) return -1; if (active_wb && !active_wb->pixel_write) diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h index 777b7bd91f27..067a4797f7a0 100644 --- a/drivers/gpu/drm/vkms/vkms_drv.h +++ b/drivers/gpu/drm/vkms/vkms_drv.h @@ -39,7 +39,6 @@ struct vkms_frame_info { struct drm_framebuffer *fb; struct drm_rect src, dst; - struct drm_rect rotated; struct iosys_map map[DRM_FORMAT_MAX_PLANES]; unsigned int rotation; }; @@ -80,26 +79,38 @@ enum pixel_read_direction { READ_LEFT_TO_RIGHT }; +struct vkms_plane_state; + /** - * typedef pixel_read_t - These functions are used to read a pixel in the source frame, + * typedef pixel_read_line_t - These functions are used to read a pixel line in the source frame, * convert it to `struct pixel_argb_u16` and write it to @out_pixel. * - * @in_pixel: pointer to the pixel to read - * @out_pixel: pointer to write the converted pixel + * @plane: plane used as source for the pixel value + * @x_start: X (width) coordinate of the first pixel to copy. The caller must ensure that x_start + * is non-negative and smaller than @plane->frame_info->fb->width. + * @y_start: Y (height) coordinate of the first pixel to copy. The caller must ensure that y_start + * is non-negative and smaller than @plane->frame_info->fb->height. + * @direction: direction to use for the copy, starting at @x_start/@y_start + * @count: number of pixels to copy + * @out_pixel: pointer where to write the pixel values. They will be written from @out_pixel[0] + * (included) to @out_pixel[@count] (excluded). The caller must ensure that out_pixel have a + * length of at least @count. */ -typedef void (*pixel_read_t)(const u8 *in_pixel, struct pixel_argb_u16 *out_pixel); +typedef void (*pixel_read_line_t)(const struct vkms_plane_state *plane, int x_start, + int y_start, enum pixel_read_direction direction, int count, + struct pixel_argb_u16 out_pixel[]); /** * struct vkms_plane_state - Driver specific plane state * @base: base plane state * @frame_info: data required for composing computation - * @pixel_read: function to read a pixel in this plane. The creator of a struct vkms_plane_state - * must ensure that this pointer is valid + * @pixel_read_line: function to read a pixel line in this plane. The creator of a + * struct vkms_plane_state must ensure that this pointer is valid */ struct vkms_plane_state { struct drm_shadow_plane_state base; struct vkms_frame_info *frame_info; - pixel_read_t pixel_read; + pixel_read_line_t pixel_read_line; }; struct vkms_plane { @@ -265,7 +276,6 @@ int vkms_verify_crc_source(struct drm_crtc *crtc, const char *source_name, /* Composer Support */ void vkms_composer_worker(struct work_struct *work); void vkms_set_composer(struct vkms_output *out, bool enabled); -void vkms_compose_row(struct line_buffer *stage_buffer, struct vkms_plane_state *plane, int y); void vkms_writeback_row(struct vkms_writeback_job *wb, const struct line_buffer *src_buffer, int y); /* Writeback */ diff --git a/drivers/gpu/drm/vkms/vkms_formats.c b/drivers/gpu/drm/vkms/vkms_formats.c index d0e7dfc1f0d3..0f6678420a11 100644 --- a/drivers/gpu/drm/vkms/vkms_formats.c +++ b/drivers/gpu/drm/vkms/vkms_formats.c @@ -140,83 +140,51 @@ static void packed_pixels_addr_1x1(const struct vkms_frame_info *frame_info, *addr = (u8 *)frame_info->map[0].vaddr + offset; } -static void *get_packed_src_addr(const struct vkms_frame_info *frame_info, int y, - int plane_index) -{ - int x_src = frame_info->src.x1 >> 16; - int y_src = y - frame_info->rotated.y1 + (frame_info->src.y1 >> 16); - u8 *addr; - int rem_x, rem_y; - - WARN_ONCE(drm_format_info_block_width(frame_info->fb->format, plane_index) != 1, - "%s() only support formats with block_w == 1", __func__); - WARN_ONCE(drm_format_info_block_height(frame_info->fb->format, plane_index) != 1, - "%s() only support formats with block_h == 1", __func__); - - packed_pixels_addr(frame_info, x_src, y_src, plane_index, &addr, &rem_x, &rem_y); - - return addr; -} - -static int get_x_position(const struct vkms_frame_info *frame_info, int limit, int x) -{ - if (frame_info->rotation & (DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_270)) - return limit - x - 1; - return x; -} - /* - * The following functions take pixel data from the buffer and convert them to the format - * ARGB16161616 in @out_pixel. + * The following functions take pixel data (a, r, g, b, pixel, ...) and convert them to + * &struct pixel_argb_u16 * - * They are used in the vkms_compose_row() function to handle multiple formats. + * They are used in the `read_line`s functions to avoid duplicate work for some pixel formats. */ -static void ARGB8888_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16 *out_pixel) +static struct pixel_argb_u16 argb_u16_from_u8888(u8 a, u8 r, u8 g, u8 b) { + struct pixel_argb_u16 out_pixel; /* * The 257 is the "conversion ratio". This number is obtained by the * (2^16 - 1) / (2^8 - 1) division. Which, in this case, tries to get * the best color value in a pixel format with more possibilities. * A similar idea applies to others RGB color conversions. */ - out_pixel->a = (u16)in_pixel[3] * 257; - out_pixel->r = (u16)in_pixel[2] * 257; - out_pixel->g = (u16)in_pixel[1] * 257; - out_pixel->b = (u16)in_pixel[0] * 257; -} + out_pixel.a = (u16)a * 257; + out_pixel.r = (u16)r * 257; + out_pixel.g = (u16)g * 257; + out_pixel.b = (u16)b * 257; -static void XRGB8888_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16 *out_pixel) -{ - out_pixel->a = (u16)0xffff; - out_pixel->r = (u16)in_pixel[2] * 257; - out_pixel->g = (u16)in_pixel[1] * 257; - out_pixel->b = (u16)in_pixel[0] * 257; + return out_pixel; } -static void ARGB16161616_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16 *out_pixel) +static struct pixel_argb_u16 argb_u16_from_u16161616(u16 a, u16 r, u16 g, u16 b) { - __le16 *pixel = (__le16 *)in_pixel; + struct pixel_argb_u16 out_pixel; + + out_pixel.a = a; + out_pixel.r = r; + out_pixel.g = g; + out_pixel.b = b; - out_pixel->a = le16_to_cpu(pixel[3]); - out_pixel->r = le16_to_cpu(pixel[2]); - out_pixel->g = le16_to_cpu(pixel[1]); - out_pixel->b = le16_to_cpu(pixel[0]); + return out_pixel; } -static void XRGB16161616_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16 *out_pixel) +static struct pixel_argb_u16 argb_u16_from_le16161616(__le16 a, __le16 r, __le16 g, __le16 b) { - __le16 *pixel = (__le16 *)in_pixel; - - out_pixel->a = (u16)0xffff; - out_pixel->r = le16_to_cpu(pixel[2]); - out_pixel->g = le16_to_cpu(pixel[1]); - out_pixel->b = le16_to_cpu(pixel[0]); + return argb_u16_from_u16161616(le16_to_cpu(a), le16_to_cpu(r), le16_to_cpu(g), + le16_to_cpu(b)); } -static void RGB565_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16 *out_pixel) +static struct pixel_argb_u16 argb_u16_from_RGB565(const __le16 *pixel) { - __le16 *pixel = (__le16 *)in_pixel; + struct pixel_argb_u16 out_pixel; s64 fp_rb_ratio = drm_fixp_div(drm_int2fixp(65535), drm_int2fixp(31)); s64 fp_g_ratio = drm_fixp_div(drm_int2fixp(65535), drm_int2fixp(63)); @@ -226,40 +194,120 @@ static void RGB565_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16 *out_pi s64 fp_g = drm_int2fixp((rgb_565 >> 5) & 0x3f); s64 fp_b = drm_int2fixp(rgb_565 & 0x1f); - out_pixel->a = (u16)0xffff; - out_pixel->r = drm_fixp2int_round(drm_fixp_mul(fp_r, fp_rb_ratio)); - out_pixel->g = drm_fixp2int_round(drm_fixp_mul(fp_g, fp_g_ratio)); - out_pixel->b = drm_fixp2int_round(drm_fixp_mul(fp_b, fp_rb_ratio)); + out_pixel.a = (u16)0xffff; + out_pixel.r = drm_fixp2int_round(drm_fixp_mul(fp_r, fp_rb_ratio)); + out_pixel.g = drm_fixp2int_round(drm_fixp_mul(fp_g, fp_g_ratio)); + out_pixel.b = drm_fixp2int_round(drm_fixp_mul(fp_b, fp_rb_ratio)); + + return out_pixel; } -/** - * vkms_compose_row - compose a single row of a plane - * @stage_buffer: output line with the composed pixels - * @plane: state of the plane that is being composed - * @y: y coordinate of the row +/* + * The following functions are read_line function for each pixel format supported by VKMS. + * + * They read a line starting at the point @x_start,@y_start following the @direction. The result + * is stored in @out_pixel and in the format ARGB16161616. + * + * These functions are very repetitive, but the innermost pixel loops must be kept inside these + * functions for performance reasons. Some benchmarking was done in [1] where having the innermost + * loop factored out of these functions showed a slowdown by a factor of three. * - * This function composes a single row of a plane. It gets the source pixels - * through the y coordinate (see get_packed_src_addr()) and goes linearly - * through the source pixel, reading the pixels and converting it to - * ARGB16161616 (see the pixel_read() callback). For rotate-90 and rotate-270, - * the source pixels are not traversed linearly. The source pixels are queried - * on each iteration in order to traverse the pixels vertically. + * [1]: https://lore.kernel.org/dri-devel/d258c8dc-78e9-4509-9037-a98f7f33b3a3@riseup.net/ */ -void vkms_compose_row(struct line_buffer *stage_buffer, struct vkms_plane_state *plane, int y) + +static void ARGB8888_read_line(const struct vkms_plane_state *plane, int x_start, int y_start, + enum pixel_read_direction direction, int count, + struct pixel_argb_u16 out_pixel[]) { - struct pixel_argb_u16 *out_pixels = stage_buffer->pixels; - struct vkms_frame_info *frame_info = plane->frame_info; - u8 *src_pixels = get_packed_src_addr(frame_info, y, 0); - int limit = min_t(size_t, drm_rect_width(&frame_info->dst), stage_buffer->n_pixels); + struct pixel_argb_u16 *end = out_pixel + count; + u8 *src_pixels; + + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); + + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); + + while (out_pixel < end) { + u8 *px = (u8 *)src_pixels; + *out_pixel = argb_u16_from_u8888(px[3], px[2], px[1], px[0]); + out_pixel += 1; + src_pixels += step; + } +} + +static void XRGB8888_read_line(const struct vkms_plane_state *plane, int x_start, int y_start, + enum pixel_read_direction direction, int count, + struct pixel_argb_u16 out_pixel[]) +{ + struct pixel_argb_u16 *end = out_pixel + count; + u8 *src_pixels; + + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); + + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); + + while (out_pixel < end) { + u8 *px = (u8 *)src_pixels; + *out_pixel = argb_u16_from_u8888(255, px[2], px[1], px[0]); + out_pixel += 1; + src_pixels += step; + } +} + +static void ARGB16161616_read_line(const struct vkms_plane_state *plane, int x_start, + int y_start, enum pixel_read_direction direction, int count, + struct pixel_argb_u16 out_pixel[]) +{ + struct pixel_argb_u16 *end = out_pixel + count; + u8 *src_pixels; + + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); + + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); + + while (out_pixel < end) { + u16 *px = (u16 *)src_pixels; + *out_pixel = argb_u16_from_u16161616(px[3], px[2], px[1], px[0]); + out_pixel += 1; + src_pixels += step; + } +} + +static void XRGB16161616_read_line(const struct vkms_plane_state *plane, int x_start, + int y_start, enum pixel_read_direction direction, int count, + struct pixel_argb_u16 out_pixel[]) +{ + struct pixel_argb_u16 *end = out_pixel + count; + u8 *src_pixels; + + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); + + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); + + while (out_pixel < end) { + __le16 *px = (__le16 *)src_pixels; + *out_pixel = argb_u16_from_le16161616(cpu_to_le16(0xFFFF), px[2], px[1], px[0]); + out_pixel += 1; + src_pixels += step; + } +} + +static void RGB565_read_line(const struct vkms_plane_state *plane, int x_start, + int y_start, enum pixel_read_direction direction, int count, + struct pixel_argb_u16 out_pixel[]) +{ + struct pixel_argb_u16 *end = out_pixel + count; + u8 *src_pixels; + + packed_pixels_addr_1x1(plane->frame_info, x_start, y_start, 0, &src_pixels); - for (size_t x = 0; x < limit; x++, src_pixels += frame_info->fb->format->cpp[0]) { - int x_pos = get_x_position(frame_info, limit, x); + int step = get_block_step_bytes(plane->frame_info->fb, direction, 0); - if (drm_rotation_90_or_270(frame_info->rotation)) - src_pixels = get_packed_src_addr(frame_info, x + frame_info->rotated.y1, 0) - + frame_info->fb->format->cpp[0] * y; + while (out_pixel < end) { + __le16 *px = (__le16 *)src_pixels; - plane->pixel_read(src_pixels, &out_pixels[x_pos]); + *out_pixel = argb_u16_from_RGB565(px); + out_pixel += 1; + src_pixels += step; } } @@ -359,25 +407,25 @@ void vkms_writeback_row(struct vkms_writeback_job *wb, } /** - * get_pixel_read_function() - Retrieve the correct read_pixel function for a specific + * get_pixel_read_line_function() - Retrieve the correct read_line function for a specific * format. The returned pointer is NULL for unsupported pixel formats. The caller must ensure that * the pointer is valid before using it in a vkms_plane_state. * * @format: DRM_FORMAT_* value for which to obtain a conversion function (see [drm_fourcc.h]) */ -pixel_read_t get_pixel_read_function(u32 format) +pixel_read_line_t get_pixel_read_line_function(u32 format) { switch (format) { case DRM_FORMAT_ARGB8888: - return &ARGB8888_to_argb_u16; + return &ARGB8888_read_line; case DRM_FORMAT_XRGB8888: - return &XRGB8888_to_argb_u16; + return &XRGB8888_read_line; case DRM_FORMAT_ARGB16161616: - return &ARGB16161616_to_argb_u16; + return &ARGB16161616_read_line; case DRM_FORMAT_XRGB16161616: - return &XRGB16161616_to_argb_u16; + return &XRGB16161616_read_line; case DRM_FORMAT_RGB565: - return &RGB565_to_argb_u16; + return &RGB565_read_line; default: /* * This is a bug in vkms_plane_atomic_check(). All the supported diff --git a/drivers/gpu/drm/vkms/vkms_formats.h b/drivers/gpu/drm/vkms/vkms_formats.h index 3ecea4563254..8d2bef95ff79 100644 --- a/drivers/gpu/drm/vkms/vkms_formats.h +++ b/drivers/gpu/drm/vkms/vkms_formats.h @@ -5,7 +5,7 @@ #include "vkms_drv.h" -pixel_read_t get_pixel_read_function(u32 format); +pixel_read_line_t get_pixel_read_line_function(u32 format); pixel_write_t get_pixel_write_function(u32 format); diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c index 10e9b23dab28..8875bed76410 100644 --- a/drivers/gpu/drm/vkms/vkms_plane.c +++ b/drivers/gpu/drm/vkms/vkms_plane.c @@ -112,7 +112,6 @@ static void vkms_plane_atomic_update(struct drm_plane *plane, frame_info = vkms_plane_state->frame_info; memcpy(&frame_info->src, &new_state->src, sizeof(struct drm_rect)); memcpy(&frame_info->dst, &new_state->dst, sizeof(struct drm_rect)); - memcpy(&frame_info->rotated, &new_state->dst, sizeof(struct drm_rect)); frame_info->fb = fb; memcpy(&frame_info->map, &shadow_plane_state->data, sizeof(frame_info->map)); drm_framebuffer_get(frame_info->fb); @@ -122,10 +121,8 @@ static void vkms_plane_atomic_update(struct drm_plane *plane, DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y); - drm_rect_rotate(&frame_info->rotated, drm_rect_width(&frame_info->rotated), - drm_rect_height(&frame_info->rotated), frame_info->rotation); - vkms_plane_state->pixel_read = get_pixel_read_function(fmt); + vkms_plane_state->pixel_read_line = get_pixel_read_line_function(fmt); } static int vkms_plane_atomic_check(struct drm_plane *plane,
Re-introduce a line-by-line composition algorithm for each pixel format. This allows more performance by not requiring an indirection per pixel read. This patch is focused on readability of the code. Line-by-line composition was introduced by [1] but rewritten back to pixel-by-pixel algorithm in [2]. At this time, nobody noticed the impact on performance, and it was merged. This patch is almost a revert of [2], but in addition efforts have been made to increase readability and maintainability of the rotation handling. The blend function is now divided in two parts: - Transformation of coordinates from the output referential to the source referential - Line conversion and blending Most of the complexity of the rotation management is avoided by using drm_rect_* helpers. The remaining complexity is around the clipping, to avoid reading/writing outside source/destination buffers. The pixel conversion is now done line-by-line, so the read_pixel_t was replaced with read_pixel_line_t callback. This way the indirection is only required once per line and per plane, instead of once per pixel and per plane. The read_line_t callbacks are very similar for most pixel format, but it is required to avoid performance impact. Some helpers for color conversion were introduced to avoid code repetition: - *_to_argb_u16: perform colors conversion. They should be inlined by the compiler, and they are used to avoid repetition between multiple variants of the same format (argb/xrgb and maybe in the future for formats like bgr formats). This new algorithm was tested with: - kms_plane (for color conversions) - kms_rotation_crc (for rotations of planes) - kms_cursor_crc (for translations of planes) - kms_rotation (for all rotations and formats combinations) [3] The performance gain was mesured with kms_fb_stress [4] with some modification to fix the writeback format. The performance improvement is around 5 to 10%. [1]: commit 8ba1648567e2 ("drm: vkms: Refactor the plane composer to accept new formats") https://lore.kernel.org/all/20220905190811.25024-7-igormtorrente@gmail.com/ [2]: commit 322d716a3e8a ("drm/vkms: isolate pixel conversion functionality") https://lore.kernel.org/all/20230418130525.128733-2-mcanal@igalia.com/ [3]: https://lore.kernel.org/igt-dev/20240313-new_rotation-v2-0-6230fd5cae59@bootlin.com/ [4]: https://lore.kernel.org/all/20240422-kms_fb_stress-dev-v5-0-0c577163dc88@riseup.net/ Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> # Conflicts: # drivers/gpu/drm/vkms/vkms_composer.c --- drivers/gpu/drm/vkms/vkms_composer.c | 234 ++++++++++++++++++++++++++++------- drivers/gpu/drm/vkms/vkms_drv.h | 28 +++-- drivers/gpu/drm/vkms/vkms_formats.c | 224 ++++++++++++++++++++------------- drivers/gpu/drm/vkms/vkms_formats.h | 2 +- drivers/gpu/drm/vkms/vkms_plane.c | 5 +- 5 files changed, 344 insertions(+), 149 deletions(-)