[v2,2/3] dt-bindings: display: rockchip: Add schema for RK3588 DW DSI2 controller

Commit Message

Heiko Stuebner Nov. 26, 2024, 8:12 p.m. UTC

From: Heiko Stuebner <[e-mail]>

The Display Serial Interface 2 (DSI-2) is part of a group of communication
protocols defined by the MIPI Alliance. The RK3588 implements this
specification in its two MIPI DSI-2 Host Controllers that are based on a
new Synopsis IP.

Signed-off-by: Heiko Stuebner <[e-mail]>
---
 .../rockchip/rockchip,rk3588-mipi-dsi2.yaml   | 119 ++++++++++++++++++
 1 file changed, 119 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml

Patch

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml
new file mode 100644
index 000000000000..7c017e927223
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml
@@ -0,0 +1,119 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Synopsys Designware MIPI DSI2
+
+maintainers:
+  - Heiko Stuebner <[e-mail]>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3588-mipi-dsi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: sys
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This SoC uses GRF regs to switch between vopl/vopb.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dcphy
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: apb
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI output node to panel.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - rockchip,grf
+  - phys
+  - phy-names
+  - ports
+  - reg
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3588-power.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      dsi@fde20000 {
+        compatible = "rockchip,rk3588-mipi-dsi2";
+        reg = <0x0 0xfde20000 0x0 0x10000>;
+        interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>;
+        clock-names = "pclk", "sys";
+        resets = <&cru SRST_P_DSIHOST0>;
+        reset-names = "apb";
+        power-domains = <&power RK3588_PD_VOP>;
+        phys = <&mipidcphy0>;
+        phy-names = "dcphy";
+        rockchip,grf = <&vop_grf>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          dsi0_in: port@0 {
+            reg = <0>;
+          };
+
+          dsi0_out: port@1 {
+            reg = <1>;
+          };
+        };
+      };
+    };