@@ -49,6 +49,17 @@ hdmi0_con_in: endpoint {
};
};
+ hdmi1-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi1_con_in: endpoint {
+ remote-endpoint = <&hdmi1_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -220,10 +231,30 @@ hdmi0_out_con: endpoint {
};
};
+&hdmi1 {
+ status = "okay";
+};
+
+&hdmi1_in {
+ hdmi1_in_vp1: endpoint {
+ remote-endpoint = <&vp1_out_hdmi1>;
+ };
+};
+
+&hdmi1_out {
+ hdmi1_out_con: endpoint {
+ remote-endpoint = <&hdmi1_con_in>;
+ };
+};
+
&hdptxphy_hdmi0 {
status = "okay";
};
+&hdptxphy1 {
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0m2_xfer>;
@@ -891,11 +922,11 @@ &usb_host2_xhci {
status = "okay";
};
-&vop_mmu {
+&vop {
status = "okay";
};
-&vop {
+&vop_mmu {
status = "okay";
};
@@ -905,3 +936,10 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
remote-endpoint = <&hdmi0_in_vp0>;
};
};
+
+&vp1 {
+ vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+ remote-endpoint = <&hdmi1_in_vp1>;
+ };
+};
Add the necessary DT changes to enable the second HDMI output port on Radxa ROCK 5B. While at it, switch the position of &vop_mmu and @vop to maintain the alphabetical order. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> --- arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 42 +++++++++++++++++++++++-- 1 file changed, 40 insertions(+), 2 deletions(-)