| Message ID | 20241211230328.4012496-6-imre.deak@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/connector: Expose only a properly inited connector | expand |
On Thu, 12 Dec 2024, Imre Deak <imre.deak@intel.com> wrote: > After a connector is added to the drm_mode_config::connector_list, it's > visible to any in-kernel users looking up connectors via the above list. > Make sure that the connector is properly initialized before such > look-ups, by initializing the connector with > drm_connector_dynamic_register() - which doesn't add the connector to > the list - and registering it with drm_connector_dynamic_register() - > which adds the connector to the list - after the initialization is > complete. > > v2: Rebase on the change which moves adding the connector to the > connector list only later when calling > drm_connector_dynamic_register(). > > Cc: Lyude Paul <lyude@redhat.com> > Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1) > Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> > --- > drivers/gpu/drm/i915/display/intel_dp_mst.c | 27 +++++++-------------- > 1 file changed, 9 insertions(+), 18 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c > index 123c4ece62688..debe4d0eee11f 100644 > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c > @@ -1731,6 +1731,8 @@ mst_topology_add_connector(struct drm_dp_mst_topology_mgr *mgr, > if (!intel_connector) > return NULL; > > + connector = &intel_connector->base; > + > intel_connector->get_hw_state = mst_connector_get_hw_state; > intel_connector->sync_state = intel_dp_connector_sync_state; > intel_connector->mst_port = intel_dp; > @@ -1739,30 +1741,19 @@ mst_topology_add_connector(struct drm_dp_mst_topology_mgr *mgr, > > intel_dp_init_modeset_retry_work(intel_connector); > > - /* > - * TODO: The following drm_connector specific initialization belongs > - * to DRM core, however it happens atm too late in > - * drm_connector_init(). That function will also expose the connector > - * to in-kernel users, so it can't be called until the connector is > - * sufficiently initialized; init the device pointer used by the > - * following DSC setup, until a fix moving this to DRM core. > - */ > - intel_connector->base.dev = mgr->dev; > - > - intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); > - intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); > - intel_connector->dp.dsc_hblank_expansion_quirk = > - detect_dsc_hblank_expansion_quirk(intel_connector); > - > - connector = &intel_connector->base; > - ret = drm_connector_init(display->drm, connector, &mst_connector_funcs, > - DRM_MODE_CONNECTOR_DisplayPort); > + ret = drm_connector_dynamic_init(display->drm, connector, &mst_connector_funcs, > + DRM_MODE_CONNECTOR_DisplayPort, NULL); > if (ret) { > drm_dp_mst_put_port_malloc(port); > intel_connector_free(intel_connector); > return NULL; > } > > + intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); > + intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); > + intel_connector->dp.dsc_hblank_expansion_quirk = > + detect_dsc_hblank_expansion_quirk(intel_connector); > + > drm_connector_helper_add(connector, &mst_connector_helper_funcs); > > for_each_pipe(display, pipe) {
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index 123c4ece62688..debe4d0eee11f 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -1731,6 +1731,8 @@ mst_topology_add_connector(struct drm_dp_mst_topology_mgr *mgr, if (!intel_connector) return NULL; + connector = &intel_connector->base; + intel_connector->get_hw_state = mst_connector_get_hw_state; intel_connector->sync_state = intel_dp_connector_sync_state; intel_connector->mst_port = intel_dp; @@ -1739,30 +1741,19 @@ mst_topology_add_connector(struct drm_dp_mst_topology_mgr *mgr, intel_dp_init_modeset_retry_work(intel_connector); - /* - * TODO: The following drm_connector specific initialization belongs - * to DRM core, however it happens atm too late in - * drm_connector_init(). That function will also expose the connector - * to in-kernel users, so it can't be called until the connector is - * sufficiently initialized; init the device pointer used by the - * following DSC setup, until a fix moving this to DRM core. - */ - intel_connector->base.dev = mgr->dev; - - intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); - intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); - intel_connector->dp.dsc_hblank_expansion_quirk = - detect_dsc_hblank_expansion_quirk(intel_connector); - - connector = &intel_connector->base; - ret = drm_connector_init(display->drm, connector, &mst_connector_funcs, - DRM_MODE_CONNECTOR_DisplayPort); + ret = drm_connector_dynamic_init(display->drm, connector, &mst_connector_funcs, + DRM_MODE_CONNECTOR_DisplayPort, NULL); if (ret) { drm_dp_mst_put_port_malloc(port); intel_connector_free(intel_connector); return NULL; } + intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); + intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); + intel_connector->dp.dsc_hblank_expansion_quirk = + detect_dsc_hblank_expansion_quirk(intel_connector); + drm_connector_helper_add(connector, &mst_connector_helper_funcs); for_each_pipe(display, pipe) {
After a connector is added to the drm_mode_config::connector_list, it's visible to any in-kernel users looking up connectors via the above list. Make sure that the connector is properly initialized before such look-ups, by initializing the connector with drm_connector_dynamic_register() - which doesn't add the connector to the list - and registering it with drm_connector_dynamic_register() - which adds the connector to the list - after the initialization is complete. v2: Rebase on the change which moves adding the connector to the connector list only later when calling drm_connector_dynamic_register(). Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1) Signed-off-by: Imre Deak <imre.deak@intel.com> --- drivers/gpu/drm/i915/display/intel_dp_mst.c | 27 +++++++-------------- 1 file changed, 9 insertions(+), 18 deletions(-)