diff mbox series

[RFC,07/11] dt-bindings: display/msm: qcom,sm8750-mdss: Add SM8750

Message ID 20250109-b4-sm8750-display-v1-7-b3f15faf4c97@linaro.org (mailing list archive)
State New
Headers show
Series drm/msm: Add support for SM8750 | expand

Commit Message

Krzysztof Kozlowski Jan. 9, 2025, 1:08 p.m. UTC
Add MDSS/MDP display subsystem for Qualcomm SM8750 SoC, next generation
with two revisions up of the IP block comparing to SM8650.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/display/msm/qcom,sm8750-mdss.yaml     | 460 +++++++++++++++++++++
 1 file changed, 460 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..cfa21b0d081338f1b94779594798f86284ba0677
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml
@@ -0,0 +1,460 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8750-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8750 Display MDSS
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8750-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sm8750-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8750-dp
+          - const: qcom,sm8650-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8750-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sm8750-dsi-phy-3nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy-qcom-qmp.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+            compatible = "qcom,sm8750-mdss";
+            reg = <0x0ae00000 0x1000>;
+            reg-names = "mdss";
+
+            interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+            clocks = <&disp_cc_mdss_ahb_clk>,
+                     <&gcc_disp_hf_axi_clk>,
+                     <&disp_cc_mdss_mdp_clk>;
+
+            resets = <&disp_cc_mdss_core_bcr>;
+
+            power-domains = <&mdss_gdsc>;
+
+            iommus = <&apps_smmu 0x800 0x2>;
+
+            interrupt-controller;
+            #interrupt-cells = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            display-controller@ae01000 {
+                compatible = "qcom,sm8750-dpu";
+                reg = <0x0ae01000 0x93000>,
+                      <0x0aeb0000 0x2008>;
+                reg-names = "mdp",
+                            "vbif";
+
+                interrupts-extended = <&mdss 0>;
+
+                clocks = <&gcc_disp_hf_axi_clk>,
+                         <&disp_cc_mdss_ahb_clk>,
+                         <&disp_cc_mdss_mdp_lut_clk>,
+                         <&disp_cc_mdss_mdp_clk>,
+                         <&disp_cc_mdss_vsync_clk>;
+                clock-names = "nrt_bus",
+                              "iface",
+                              "lut",
+                              "core",
+                              "vsync";
+
+                assigned-clocks = <&disp_cc_mdss_vsync_clk>;
+                assigned-clock-rates = <19200000>;
+
+                operating-points-v2 = <&mdp_opp_table>;
+
+                power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+
+                        dpu_intf1_out: endpoint {
+                            remote-endpoint = <&mdss_dsi0_in>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        dpu_intf2_out: endpoint {
+                            remote-endpoint = <&mdss_dsi1_in>;
+                        };
+                    };
+
+                    port@2 {
+                        reg = <2>;
+
+                        dpu_intf0_out: endpoint {
+                            remote-endpoint = <&mdss_dp0_in>;
+                        };
+                    };
+                };
+
+                mdp_opp_table: opp-table {
+                    compatible = "operating-points-v2";
+
+                    opp-207000000 {
+                        opp-hz = /bits/ 64 <207000000>;
+                        required-opps = <&rpmhpd_opp_low_svs>;
+                    };
+
+                    opp-337000000 {
+                        opp-hz = /bits/ 64 <337000000>;
+                        required-opps = <&rpmhpd_opp_svs>;
+                    };
+
+                    opp-417000000 {
+                        opp-hz = /bits/ 64 <417000000>;
+                        required-opps = <&rpmhpd_opp_svs_l1>;
+                    };
+
+                    opp-532000000 {
+                        opp-hz = /bits/ 64 <532000000>;
+                        required-opps = <&rpmhpd_opp_nom>;
+                    };
+
+                    opp-575000000 {
+                        opp-hz = /bits/ 64 <575000000>;
+                        required-opps = <&rpmhpd_opp_nom_l1>;
+                    };
+                };
+            };
+
+            dsi@ae94000 {
+                compatible = "qcom,sm8750-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+                reg = <0x0ae94000 0x400>;
+                reg-names = "dsi_ctrl";
+
+                interrupts-extended = <&mdss 4>;
+
+                clocks = <&disp_cc_mdss_byte0_clk>,
+                         <&disp_cc_mdss_byte0_intf_clk>,
+                         <&disp_cc_mdss_pclk0_clk>,
+                         <&disp_cc_mdss_esc0_clk>,
+                         <&disp_cc_mdss_ahb_clk>,
+                         <&gcc_disp_hf_axi_clk>,
+                         <&mdss_dsi0_phy 1>,
+                         <&mdss_dsi0_phy 0>,
+                         <&disp_cc_esync0_clk>,
+                         <&disp_cc_osc_clk>,
+                         <&disp_cc_mdss_byte0_clk_src>,
+                         <&disp_cc_mdss_pclk0_clk_src>;
+                clock-names = "byte",
+                              "byte_intf",
+                              "pixel",
+                              "core",
+                              "iface",
+                              "bus",
+                              "dsi_pll_pixel",
+                              "dsi_pll_byte",
+                              "esync",
+                              "osc",
+                              "byte_src",
+                              "pixel_src";
+
+                operating-points-v2 = <&mdss_dsi_opp_table>;
+
+                power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+                phys = <&mdss_dsi0_phy>;
+                phy-names = "dsi";
+
+                vdda-supply = <&vreg_l3g_1p2>;
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+
+                        mdss_dsi0_in: endpoint {
+                            remote-endpoint = <&dpu_intf1_out>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        mdss_dsi0_out: endpoint {
+                            remote-endpoint = <&panel0_in>;
+                            data-lanes = <0 1 2 3>;
+                        };
+                    };
+                };
+
+                mdss_dsi_opp_table: opp-table {
+                    compatible = "operating-points-v2";
+
+                    opp-187500000 {
+                        opp-hz = /bits/ 64 <187500000>;
+                        required-opps = <&rpmhpd_opp_low_svs>;
+                    };
+
+                    opp-300000000 {
+                        opp-hz = /bits/ 64 <300000000>;
+                        required-opps = <&rpmhpd_opp_svs>;
+                    };
+
+                    opp-358000000 {
+                        opp-hz = /bits/ 64 <358000000>;
+                        required-opps = <&rpmhpd_opp_svs_l1>;
+                    };
+                };
+            };
+
+            mdss_dsi0_phy: phy@ae95000 {
+                compatible = "qcom,sm8750-dsi-phy-3nm";
+                reg = <0x0ae95000 0x200>,
+                      <0x0ae95200 0x280>,
+                      <0x0ae95500 0x400>;
+                reg-names = "dsi_phy",
+                            "dsi_phy_lane",
+                            "dsi_pll";
+
+                clocks = <&disp_cc_mdss_ahb_clk>,
+                         <&rpmhcc RPMH_CXO_CLK>;
+                clock-names = "iface",
+                              "ref";
+
+                vdds-supply = <&vreg_l3i_0p88>;
+
+                #clock-cells = <1>;
+                #phy-cells = <0>;
+            };
+
+            dsi@ae96000 {
+                compatible = "qcom,sm8750-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+                reg = <0x0ae96000 0x400>;
+                reg-names = "dsi_ctrl";
+
+                interrupts-extended = <&mdss 5>;
+
+                clocks = <&disp_cc_mdss_byte1_clk>,
+                         <&disp_cc_mdss_byte1_intf_clk>,
+                         <&disp_cc_mdss_pclk1_clk>,
+                         <&disp_cc_mdss_esc1_clk>,
+                         <&disp_cc_mdss_ahb_clk>,
+                         <&gcc_disp_hf_axi_clk>,
+                         <&mdss_dsi1_phy 1>,
+                         <&mdss_dsi1_phy 0>,
+                         <&disp_cc_esync1_clk>,
+                         <&disp_cc_osc_clk>,
+                         <&disp_cc_mdss_byte1_clk_src>,
+                         <&disp_cc_mdss_pclk1_clk_src>;
+                clock-names = "byte",
+                              "byte_intf",
+                              "pixel",
+                              "core",
+                              "iface",
+                              "bus",
+                              "dsi_pll_pixel",
+                              "dsi_pll_byte",
+                              "esync",
+                              "osc",
+                              "byte_src",
+                              "pixel_src";
+
+                operating-points-v2 = <&mdss_dsi_opp_table>;
+
+                power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+                phys = <&mdss_dsi1_phy>;
+                phy-names = "dsi";
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+
+                        mdss_dsi1_in: endpoint {
+                            remote-endpoint = <&dpu_intf2_out>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        mdss_dsi1_out: endpoint {
+                        };
+                    };
+                };
+            };
+
+            mdss_dsi1_phy: phy@ae97000 {
+                compatible = "qcom,sm8750-dsi-phy-3nm";
+                reg = <0x0ae97000 0x200>,
+                      <0x0ae97200 0x280>,
+                      <0x0ae97500 0x400>;
+                reg-names = "dsi_phy",
+                            "dsi_phy_lane",
+                            "dsi_pll";
+
+                clocks = <&disp_cc_mdss_ahb_clk>,
+                         <&rpmhcc RPMH_CXO_CLK>;
+                clock-names = "iface",
+                              "ref";
+
+                #clock-cells = <1>;
+                #phy-cells = <0>;
+            };
+
+            displayport-controller@af54000 {
+                compatible = "qcom,sm8750-dp", "qcom,sm8650-dp";
+                reg = <0xaf54000 0x104>,
+                      <0xaf54200 0xc0>,
+                      <0xaf55000 0x770>,
+                      <0xaf56000 0x9c>,
+                      <0xaf57000 0x9c>;
+
+                interrupts-extended = <&mdss 12>;
+
+                clocks = <&disp_cc_mdss_ahb_clk>,
+                         <&disp_cc_mdss_dptx0_aux_clk>,
+                         <&disp_cc_mdss_dptx0_link_clk>,
+                         <&disp_cc_mdss_dptx0_link_intf_clk>,
+                         <&disp_cc_mdss_dptx0_pixel0_clk>;
+                clock-names = "core_iface",
+                              "core_aux",
+                              "ctrl_link",
+                              "ctrl_link_iface",
+                              "stream_pixel";
+
+                assigned-clocks = <&disp_cc_mdss_dptx0_link_clk_src>,
+                                  <&disp_cc_mdss_dptx0_pixel0_clk_src>;
+                assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+                                         <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+                operating-points-v2 = <&dp_opp_table>;
+
+                power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+                phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+                phy-names = "dp";
+
+                #sound-dai-cells = <0>;
+
+                dp_opp_table: opp-table {
+                    compatible = "operating-points-v2";
+
+                    opp-192000000 {
+                        opp-hz = /bits/ 64 <192000000>;
+                        required-opps = <&rpmhpd_opp_low_svs_d1>;
+                    };
+
+                    opp-270000000 {
+                        opp-hz = /bits/ 64 <270000000>;
+                        required-opps = <&rpmhpd_opp_low_svs>;
+                    };
+
+                    opp-540000000 {
+                        opp-hz = /bits/ 64 <540000000>;
+                        required-opps = <&rpmhpd_opp_svs_l1>;
+                    };
+
+                    opp-810000000 {
+                        opp-hz = /bits/ 64 <810000000>;
+                        required-opps = <&rpmhpd_opp_nom>;
+                    };
+                };
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+
+                        mdss_dp0_in: endpoint {
+                            remote-endpoint = <&dpu_intf0_out>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        mdss_dp0_out: endpoint {
+                            remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+                        };
+                    };
+                };
+            };
+        };