diff mbox series

[v2,4/4] arm64: dts: qcom: sm7325-nothing-spacewar: Enable panel and GPU

Message ID 20250217222431.82522-5-danila@jiaxyga.com (mailing list archive)
State New
Headers show
Series Add and enable the panel | expand

Commit Message

Danila Tikhonov Feb. 17, 2025, 10:24 p.m. UTC 
From: Eugene Lepshy <fekz115@gmail.com>

Enable the Adreno GPU and configure the Visionox RM692E5 panel.

Signed-off-by: Eugene Lepshy <fekz115@gmail.com>
Co-developed-by: Danila Tikhonov <danila@jiaxyga.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
Note:
Depends on https://lore.kernel.org/linux-arm-msm/20250122-dpu-111-topology-v2-1-505e95964af9@somainline.org/
---
 .../boot/dts/qcom/sm7325-nothing-spacewar.dts | 51 ++++++++++++++++++-
 1 file changed, 49 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
index a5cda478bd78..ca9c510a49b4 100644
--- a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
+++ b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
@@ -757,6 +757,10 @@  &gpi_dma1 {
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
 &gpu_zap_shader {
 	firmware-name = "qcom/sm7325/nothing/spacewar/a660_zap.mbn";
 };
@@ -823,15 +827,44 @@  &ipa {
 	status = "okay";
 };
 
-/* MDSS remains disabled until the panel driver is present. */
+&mdss {
+	status = "okay";
+};
+
 &mdss_dsi {
 	vdda-supply = <&vdd_a_dsi_0_1p2>;
+	status = "okay";
+
+	panel: panel@0 {
+		compatible = "nothing,rm692e5-spacewar",
+			     "visionox,rm692e5";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&vdd_oled>;
+		vddio-supply = <&vdd_io_oled>;
+
+		pinctrl-0 = <&lcd_reset_n>,
+			    <&mdp_vsync_p>;
+		pinctrl-names = "default";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
 
-	/* Visionox RM692E5 panel */
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
 };
 
 &mdss_dsi_phy {
 	vdds-supply = <&vdd_a_dsi_0_0p9>;
+	status = "okay";
 };
 
 &pm7325_gpios {
@@ -1147,6 +1180,20 @@  nfc_int_req: nfc-int-req-state {
 		bias-pull-down;
 	};
 
+	lcd_reset_n: lcd-reset-n-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdp_vsync_p: mdp-vsync-p-state {
+		pins = "gpio80";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	hst_bt_en: hst-bt-en-state {
 		pins = "gpio85";
 		function = "gpio";