diff mbox series

[v5,59/80] drm/vc4: hdmi: Move CEC init to its own function

Message ID 21f4717e076291522d0784a7fd3774d8e97eaf01.1599120059.git-series.maxime@cerno.tech (mailing list archive)
State New, archived
Headers show
Series drm/vc4: Support BCM2711 Display Pipeline | expand

Commit Message

Maxime Ripard Sept. 3, 2020, 8:01 a.m. UTC 
The CEC init code was put directly into the bind function, which was quite
inconsistent with how the audio support was done, and would prevent us from
further changes to skip that initialisation entirely.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 108 +++++++++++++++++++++-------------
 1 file changed, 67 insertions(+), 41 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 4d0b44a2ac61..bf537c6d413f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1170,6 +1170,67 @@  static const struct cec_adap_ops vc4_hdmi_cec_adap_ops = {
 	.adap_log_addr = vc4_hdmi_cec_adap_log_addr,
 	.adap_transmit = vc4_hdmi_cec_adap_transmit,
 };
+
+static int vc4_hdmi_cec_init(struct vc4_hdmi *vc4_hdmi)
+{
+	struct cec_connector_info conn_info;
+	struct platform_device *pdev = vc4_hdmi->pdev;
+	u32 value;
+	int ret;
+
+	vc4_hdmi->cec_adap = cec_allocate_adapter(&vc4_hdmi_cec_adap_ops,
+						  vc4_hdmi, "vc4",
+						  CEC_CAP_DEFAULTS |
+						  CEC_CAP_CONNECTOR_INFO, 1);
+	ret = PTR_ERR_OR_ZERO(vc4_hdmi->cec_adap);
+	if (ret < 0)
+		return ret;
+
+	cec_fill_conn_info_from_drm(&conn_info, &vc4_hdmi->connector);
+	cec_s_conn_info(vc4_hdmi->cec_adap, &conn_info);
+
+	HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, 0xffffffff);
+	value = HDMI_READ(HDMI_CEC_CNTRL_1);
+	value &= ~VC4_HDMI_CEC_DIV_CLK_CNT_MASK;
+	/*
+	 * Set the logical address to Unregistered and set the clock
+	 * divider: the hsm_clock rate and this divider setting will
+	 * give a 40 kHz CEC clock.
+	 */
+	value |= VC4_HDMI_CEC_ADDR_MASK |
+		 (4091 << VC4_HDMI_CEC_DIV_CLK_CNT_SHIFT);
+	HDMI_WRITE(HDMI_CEC_CNTRL_1, value);
+	ret = devm_request_threaded_irq(&pdev->dev, platform_get_irq(pdev, 0),
+					vc4_cec_irq_handler,
+					vc4_cec_irq_handler_thread, 0,
+					"vc4 hdmi cec", vc4_hdmi);
+	if (ret)
+		goto err_delete_cec_adap;
+
+	ret = cec_register_adapter(vc4_hdmi->cec_adap, &pdev->dev);
+	if (ret < 0)
+		goto err_delete_cec_adap;
+
+	return 0;
+
+err_delete_cec_adap:
+	cec_delete_adapter(vc4_hdmi->cec_adap);
+
+	return ret;
+}
+
+static void vc4_hdmi_cec_exit(struct vc4_hdmi *vc4_hdmi)
+{
+	cec_unregister_adapter(vc4_hdmi->cec_adap);
+}
+#else
+static int vc4_hdmi_cec_init(struct vc4_hdmi *vc4_hdmi)
+{
+	return 0;
+}
+
+static void vc4_hdmi_cec_exit(struct vc4_hdmi *vc4_hdmi) {};
+
 #endif
 
 static int vc4_hdmi_build_regset(struct vc4_hdmi *vc4_hdmi,
@@ -1249,9 +1310,6 @@  static int vc4_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)
 
 static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 {
-#ifdef CONFIG_DRM_VC4_HDMI_CEC
-	struct cec_connector_info conn_info;
-#endif
 	const struct vc4_hdmi_variant *variant = of_device_get_match_data(dev);
 	struct platform_device *pdev = to_platform_device(dev);
 	struct drm_device *drm = dev_get_drvdata(master);
@@ -1331,43 +1389,13 @@  static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 	if (ret)
 		goto err_destroy_encoder;
 
-#ifdef CONFIG_DRM_VC4_HDMI_CEC
-	vc4_hdmi->cec_adap = cec_allocate_adapter(&vc4_hdmi_cec_adap_ops,
-						  vc4_hdmi, "vc4",
-						  CEC_CAP_DEFAULTS |
-						  CEC_CAP_CONNECTOR_INFO, 1);
-	ret = PTR_ERR_OR_ZERO(vc4_hdmi->cec_adap);
-	if (ret < 0)
-		goto err_destroy_conn;
-
-	cec_fill_conn_info_from_drm(&conn_info, &vc4_hdmi->connector);
-	cec_s_conn_info(vc4_hdmi->cec_adap, &conn_info);
-
-	HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, 0xffffffff);
-	value = HDMI_READ(HDMI_CEC_CNTRL_1);
-	value &= ~VC4_HDMI_CEC_DIV_CLK_CNT_MASK;
-	/*
-	 * Set the logical address to Unregistered and set the clock
-	 * divider: the hsm_clock rate and this divider setting will
-	 * give a 40 kHz CEC clock.
-	 */
-	value |= VC4_HDMI_CEC_ADDR_MASK |
-		 (4091 << VC4_HDMI_CEC_DIV_CLK_CNT_SHIFT);
-	HDMI_WRITE(HDMI_CEC_CNTRL_1, value);
-	ret = devm_request_threaded_irq(dev, platform_get_irq(pdev, 0),
-					vc4_cec_irq_handler,
-					vc4_cec_irq_handler_thread, 0,
-					"vc4 hdmi cec", vc4_hdmi);
+	ret = vc4_hdmi_cec_init(vc4_hdmi);
 	if (ret)
-		goto err_delete_cec_adap;
-	ret = cec_register_adapter(vc4_hdmi->cec_adap, dev);
-	if (ret < 0)
-		goto err_delete_cec_adap;
-#endif
+		goto err_destroy_conn;
 
 	ret = vc4_hdmi_audio_init(vc4_hdmi);
 	if (ret)
-		goto err_destroy_encoder;
+		goto err_free_cec;
 
 	vc4_debugfs_add_file(drm, variant->debugfs_name,
 			     vc4_hdmi_debugfs_regs,
@@ -1375,12 +1403,10 @@  static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 
 	return 0;
 
-#ifdef CONFIG_DRM_VC4_HDMI_CEC
-err_delete_cec_adap:
-	cec_delete_adapter(vc4_hdmi->cec_adap);
+err_free_cec:
+	vc4_hdmi_cec_exit(vc4_hdmi);
 err_destroy_conn:
 	vc4_hdmi_connector_destroy(&vc4_hdmi->connector);
-#endif
 err_destroy_encoder:
 	drm_encoder_cleanup(encoder);
 err_unprepare_hsm:
@@ -1421,7 +1447,7 @@  static void vc4_hdmi_unbind(struct device *dev, struct device *master,
 	kfree(vc4_hdmi->hdmi_regset.regs);
 	kfree(vc4_hdmi->hd_regset.regs);
 
-	cec_unregister_adapter(vc4_hdmi->cec_adap);
+	vc4_hdmi_cec_exit(vc4_hdmi);
 	vc4_hdmi_connector_destroy(&vc4_hdmi->connector);
 	drm_encoder_cleanup(&vc4_hdmi->encoder.base.base);