@@ -12,6 +12,7 @@ vc4-y := \
vc4_kms.o \
vc4_gem.o \
vc4_hdmi.o \
+ vc4_hdmi_phy.o \
vc4_vec.o \
vc4_hvs.o \
vc4_irq.o \
@@ -323,7 +323,9 @@ static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder)
HDMI_WRITE(HDMI_RAM_PACKET_CONFIG, 0);
- HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+ if (vc4_hdmi->variant->phy_disable)
+ vc4_hdmi->variant->phy_disable(vc4_hdmi);
+
HDMI_WRITE(HDMI_VID_CTL,
HDMI_READ(HDMI_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE);
@@ -383,12 +385,8 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
if (vc4_hdmi->variant->reset)
vc4_hdmi->variant->reset(vc4_hdmi);
- /* PHY should be in reset, like
- * vc4_hdmi_encoder_disable() does.
- */
- HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
-
- HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0);
+ if (vc4_hdmi->variant->phy_init)
+ vc4_hdmi->variant->phy_init(vc4_hdmi, mode);
if (debug_dump_regs) {
struct drm_printer p = drm_info_printer(&vc4_hdmi->pdev->dev);
@@ -1413,6 +1411,8 @@ struct vc4_hdmi_variant bcm2835_variant = {
.init_resources = vc4_hdmi_init_resources,
.reset = vc4_hdmi_reset,
+ .phy_init = vc4_hdmi_phy_init,
+ .phy_disable = vc4_hdmi_phy_disable,
};
static const struct of_device_id vc4_hdmi_dt_match[] = {
@@ -21,6 +21,9 @@ to_vc4_hdmi_encoder(struct drm_encoder *encoder)
return container_of(encoder, struct vc4_hdmi_encoder, base.base);
}
+struct drm_display_mode;
+
+struct vc4_hdmi;
struct vc4_hdmi_register;
struct vc4_hdmi_variant {
@@ -37,6 +40,13 @@ struct vc4_hdmi_variant {
/* Callback to reset the HDMI block */
void (*reset)(struct vc4_hdmi *vc4_hdmi);
+
+ /* Callback to initialize the PHY according to the mode */
+ void (*phy_init)(struct vc4_hdmi *vc4_hdmi,
+ struct drm_display_mode *mode);
+
+ /* Callback to disable the PHY */
+ void (*phy_disable)(struct vc4_hdmi *vc4_hdmi);
};
/* HDMI audio information */
@@ -94,4 +104,8 @@ encoder_to_vc4_hdmi(struct drm_encoder *encoder)
return container_of(_encoder, struct vc4_hdmi, encoder);
}
+void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
+ struct drm_display_mode *mode);
+void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi);
+
#endif /* _VC4_HDMI_H_ */
new file mode 100644
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Broadcom
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdclark@gmail.com>
+ */
+
+#include "vc4_hdmi.h"
+#include "vc4_hdmi_regs.h"
+
+void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi, struct drm_display_mode *mode)
+{
+ /* PHY should be in reset, like
+ * vc4_hdmi_encoder_disable() does.
+ */
+
+ HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+ HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0);
+}
+
+void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi)
+{
+ HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+}
The HDMI PHY in the BCM2711 HDMI controller is significantly more complicated to setup than in the older BCM283x SoCs. Let's add hooks to enable and disable the PHY. Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- drivers/gpu/drm/vc4/Makefile | 1 + drivers/gpu/drm/vc4/vc4_hdmi.c | 14 +++++++------- drivers/gpu/drm/vc4/vc4_hdmi.h | 14 ++++++++++++++ drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 25 +++++++++++++++++++++++++ 4 files changed, 47 insertions(+), 7 deletions(-) create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_phy.c