diff mbox series

[v3,4/5] dt-bindings: drm/panel: simple: add ortustech, com37h3m99dtc panel

Message ID 3e0720fbddfd7b35ad8551440544411485d8ad9f.1559905870.git.hns@goldelico.com (mailing list archive)
State New, archived
Headers show
Series drm/panel-simple: Add panel parameters for ortustech-com37h3m05dtc/99dtc and sharp-lq070y3dg3b | expand

Commit Message

H. Nikolaus Schaller June 7, 2019, 11:11 a.m. UTC
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 .../display/panel/ortustech,com37h3m99dtc.txt        | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt

Comments

Sam Ravnborg June 25, 2019, 8:40 p.m. UTC | #1
On Fri, Jun 07, 2019 at 01:11:10PM +0200, H. Nikolaus Schaller wrote:
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> ---
>  .../display/panel/ortustech,com37h3m99dtc.txt        | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt
> new file mode 100644
> index 000000000000..06a73c3f46b5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt
> @@ -0,0 +1,12 @@
> +OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel
> +
> +Required properties:
> +- compatible: should be "ortustech,com37h3m99dtc"
> +
> +Optional properties:
> +- enable-gpios: GPIO pin to enable or disable the panel
> +- backlight: phandle of the backlight device attached to the panel
> +- power-supply: phandle of the regulator that provides the supply voltage
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> -- 
> 2.19.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Rob Herring (Arm) July 9, 2019, 1:58 a.m. UTC | #2
On Fri,  7 Jun 2019 13:11:10 +0200, "H. Nikolaus Schaller" wrote:
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> ---
>  .../display/panel/ortustech,com37h3m99dtc.txt        | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt
new file mode 100644
index 000000000000..06a73c3f46b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt
@@ -0,0 +1,12 @@ 
+OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel
+
+Required properties:
+- compatible: should be "ortustech,com37h3m99dtc"
+
+Optional properties:
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+- power-supply: phandle of the regulator that provides the supply voltage
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.