@@ -209,7 +209,7 @@ static void tilcdc_fini(struct drm_device *dev)
drm_irq_uninstall(dev);
drm_mode_config_cleanup(dev);
- tilcdc_remove_external_encoders(dev);
+ tilcdc_remove_external_device(dev);
#ifdef CONFIG_CPU_FREQ
if (priv->freq_transition.notifier_call)
@@ -381,12 +381,17 @@ static int tilcdc_init(struct drm_driver *ddrv, struct device *dev)
if (ret < 0)
goto init_failed;
- ret = tilcdc_add_external_encoders(ddev);
+ ret = tilcdc_add_component_encoder(ddev);
if (ret < 0)
goto init_failed;
+ } else {
+ ret = tilcdc_attach_external_device(ddev);
+ if (ret)
+ goto init_failed;
}
- if ((priv->num_encoders == 0) || (priv->num_connectors == 0)) {
+ if (!priv->external_connector &&
+ ((priv->num_encoders == 0) || (priv->num_connectors == 0))) {
dev_err(dev, "no encoders/connectors found\n");
ret = -ENXIO;
goto init_failed;
@@ -88,7 +88,10 @@ struct tilcdc_drm_private {
unsigned int num_connectors;
struct drm_connector *connectors[8];
- const struct drm_connector_helper_funcs *connector_funcs[8];
+
+ struct drm_encoder *external_encoder;
+ struct drm_connector *external_connector;
+ const struct drm_connector_helper_funcs *connector_funcs;
bool is_registered;
bool is_componentized;
@@ -28,44 +28,50 @@
.raster_order = 0,
};
+static const struct tilcdc_panel_info panel_info_default = {
+ .ac_bias = 255,
+ .ac_bias_intrpt = 0,
+ .dma_burst_sz = 16,
+ .bpp = 16,
+ .fdd = 0x80,
+ .tft_alt_mode = 0,
+ .sync_edge = 0,
+ .sync_ctrl = 1,
+ .raster_order = 0,
+};
+
static int tilcdc_external_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct tilcdc_drm_private *priv = connector->dev->dev_private;
- int ret, i;
+ int ret;
ret = tilcdc_crtc_mode_valid(priv->crtc, mode);
if (ret != MODE_OK)
return ret;
- for (i = 0; i < priv->num_connectors &&
- priv->connectors[i] != connector; i++)
- ;
-
- BUG_ON(priv->connectors[i] != connector);
- BUG_ON(!priv->connector_funcs[i]);
+ BUG_ON(priv->external_connector != connector);
+ BUG_ON(!priv->connector_funcs);
/* If the connector has its own mode_valid call it. */
- if (!IS_ERR(priv->connector_funcs[i]) &&
- priv->connector_funcs[i]->mode_valid)
- return priv->connector_funcs[i]->mode_valid(connector, mode);
+ if (!IS_ERR(priv->connector_funcs) &&
+ priv->connector_funcs->mode_valid)
+ return priv->connector_funcs->mode_valid(connector, mode);
return MODE_OK;
}
-static int tilcdc_add_external_encoder(struct drm_device *dev,
- struct drm_connector *connector)
+static int tilcdc_add_external_connector(struct drm_device *dev,
+ struct drm_connector *connector)
{
struct tilcdc_drm_private *priv = dev->dev_private;
struct drm_connector_helper_funcs *connector_funcs;
- priv->connectors[priv->num_connectors] = connector;
- priv->encoders[priv->num_encoders++] = connector->encoder;
-
- /* Only tda998x is supported at the moment. */
- tilcdc_crtc_set_simulate_vesa_sync(priv->crtc, true);
- tilcdc_crtc_set_panel_info(priv->crtc, &panel_info_tda998x);
+ /* There should never be more than one connector */
+ if (WARN_ON(priv->external_connector))
+ return -EINVAL;
+ priv->external_connector = connector;
connector_funcs = devm_kzalloc(dev->dev, sizeof(*connector_funcs),
GFP_KERNEL);
if (!connector_funcs)
@@ -78,56 +84,177 @@ static int tilcdc_add_external_encoder(struct drm_device *dev,
* everything else but use our own mode_valid() (above).
*/
if (connector->helper_private) {
- priv->connector_funcs[priv->num_connectors] =
- connector->helper_private;
- *connector_funcs = *priv->connector_funcs[priv->num_connectors];
+ priv->connector_funcs = connector->helper_private;
+ *connector_funcs = *priv->connector_funcs;
} else {
- priv->connector_funcs[priv->num_connectors] = ERR_PTR(-ENOENT);
+ priv->connector_funcs = ERR_PTR(-ENOENT);
}
connector_funcs->mode_valid = tilcdc_external_mode_valid;
drm_connector_helper_add(connector, connector_funcs);
- priv->num_connectors++;
- dev_dbg(dev->dev, "External encoder '%s' connected\n",
- connector->encoder->name);
+ dev_dbg(dev->dev, "External connector '%s' connected\n",
+ connector->name);
return 0;
}
-int tilcdc_add_external_encoders(struct drm_device *dev)
+static
+struct drm_connector *tilcdc_encoder_find_connector(struct drm_device *ddev,
+ struct drm_encoder *encoder)
{
- struct tilcdc_drm_private *priv = dev->dev_private;
struct drm_connector *connector;
- int num_internal_connectors = priv->num_connectors;
-
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- bool found = false;
- int i, ret;
-
- for (i = 0; i < num_internal_connectors; i++)
- if (connector == priv->connectors[i])
- found = true;
- if (!found) {
- ret = tilcdc_add_external_encoder(dev, connector);
- if (ret)
- return ret;
- }
+ int i;
+
+ list_for_each_entry(connector, &ddev->mode_config.connector_list, head)
+ for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++)
+ if (connector->encoder_ids[i] == encoder->base.id)
+ return connector;
+
+ dev_err(ddev->dev, "No connector found for %s encoder (id %d)\n",
+ encoder->name, encoder->base.id);
+
+ return NULL;
+}
+
+int tilcdc_add_component_encoder(struct drm_device *ddev)
+{
+ struct tilcdc_drm_private *priv = ddev->dev_private;
+ struct drm_connector *connector;
+ struct drm_encoder *encoder;
+
+ list_for_each_entry(encoder, &ddev->mode_config.encoder_list, head)
+ if (encoder->possible_crtcs & (1 << priv->crtc->index))
+ break;
+
+ if (!encoder) {
+ dev_err(ddev->dev, "%s: No suitable encoder found\n", __func__);
+ return -ENODEV;
}
- return 0;
+
+ connector = tilcdc_encoder_find_connector(ddev, encoder);
+
+ if (!connector)
+ return -ENODEV;
+
+ /* Only tda998x is supported at the moment. */
+ tilcdc_crtc_set_simulate_vesa_sync(priv->crtc, true);
+ tilcdc_crtc_set_panel_info(priv->crtc, &panel_info_tda998x);
+
+ return tilcdc_add_external_connector(ddev, connector);
}
-void tilcdc_remove_external_encoders(struct drm_device *dev)
+void tilcdc_remove_external_device(struct drm_device *dev)
{
struct tilcdc_drm_private *priv = dev->dev_private;
- int i;
/* Restore the original helper functions, if any. */
- for (i = 0; i < priv->num_connectors; i++)
- if (IS_ERR(priv->connector_funcs[i]))
- drm_connector_helper_add(priv->connectors[i], NULL);
- else if (priv->connector_funcs[i])
- drm_connector_helper_add(priv->connectors[i],
- priv->connector_funcs[i]);
+ if (IS_ERR(priv->connector_funcs))
+ drm_connector_helper_add(priv->external_connector, NULL);
+ else if (priv->connector_funcs)
+ drm_connector_helper_add(priv->external_connector,
+ priv->connector_funcs);
+}
+
+static const struct drm_encoder_funcs tilcdc_external_encoder_funcs = {
+ .destroy = drm_encoder_cleanup,
+};
+
+static
+int tilcdc_attach_bridge(struct drm_device *ddev, struct drm_bridge *bridge)
+{
+ struct tilcdc_drm_private *priv = ddev->dev_private;
+ struct drm_connector *connector;
+ int ret;
+
+ priv->external_encoder->possible_crtcs = BIT(0);
+ priv->external_encoder->bridge = bridge;
+ bridge->encoder = priv->external_encoder;
+
+ ret = drm_bridge_attach(ddev, bridge);
+ if (ret) {
+ dev_err(ddev->dev, "drm_bridge_attach() failed %d\n", ret);
+ return ret;
+ }
+
+ tilcdc_crtc_set_panel_info(priv->crtc, &panel_info_default);
+
+ connector = tilcdc_encoder_find_connector(ddev, priv->external_encoder);
+ if (!connector)
+ return -ENODEV;
+
+ ret = tilcdc_add_external_connector(ddev, connector);
+
+ return ret;
+}
+
+static int tilcdc_node_has_port(struct device_node *dev_node)
+{
+ struct device_node *node;
+
+ node = of_get_child_by_name(dev_node, "ports");
+ if (!node)
+ node = of_get_child_by_name(dev_node, "port");
+ if (!node)
+ return 0;
+ of_node_put(node);
+
+ return 1;
+}
+
+static
+struct device_node *tilcdc_get_remote_node(struct device_node *node)
+{
+ struct device_node *ep;
+ struct device_node *parent;
+
+ if (!tilcdc_node_has_port(node))
+ return NULL;
+
+ ep = of_graph_get_next_endpoint(node, NULL);
+ if (!ep)
+ return NULL;
+
+ parent = of_graph_get_remote_port_parent(ep);
+ of_node_put(ep);
+
+ return parent;
+}
+
+int tilcdc_attach_external_device(struct drm_device *ddev)
+{
+ struct tilcdc_drm_private *priv = ddev->dev_private;
+ struct device_node *remote_node;
+ struct drm_bridge *bridge;
+ int ret;
+
+ remote_node = tilcdc_get_remote_node(ddev->dev->of_node);
+ if (!remote_node)
+ return 0;
+
+ bridge = of_drm_find_bridge(remote_node);
+ of_node_put(remote_node);
+ if (!bridge)
+ return -EPROBE_DEFER;
+
+ priv->external_encoder = devm_kzalloc(ddev->dev,
+ sizeof(*priv->external_encoder),
+ GFP_KERNEL);
+ if (!priv->external_encoder)
+ return -ENOMEM;
+
+ ret = drm_encoder_init(ddev, priv->external_encoder,
+ &tilcdc_external_encoder_funcs,
+ DRM_MODE_ENCODER_NONE, NULL);
+ if (ret) {
+ dev_err(ddev->dev, "drm_encoder_init() failed %d\n", ret);
+ return ret;
+ }
+
+ ret = tilcdc_attach_bridge(ddev, bridge);
+ if (ret)
+ drm_encoder_cleanup(priv->external_encoder);
+
+ return ret;
}
static int dev_match_of(struct device *dev, void *data)
@@ -141,16 +268,10 @@ int tilcdc_get_external_components(struct device *dev,
struct device_node *node;
struct device_node *ep = NULL;
int count = 0;
+ int ret = 0;
- /* Avoid error print by of_graph_get_next_endpoint() if there
- * is no ports present.
- */
- node = of_get_child_by_name(dev->of_node, "ports");
- if (!node)
- node = of_get_child_by_name(dev->of_node, "port");
- if (!node)
+ if (!tilcdc_node_has_port(dev->of_node))
return 0;
- of_node_put(node);
while ((ep = of_graph_get_next_endpoint(dev->of_node, ep))) {
node = of_graph_get_remote_port_parent(ep);
@@ -160,17 +281,20 @@ int tilcdc_get_external_components(struct device *dev,
}
dev_dbg(dev, "Subdevice node '%s' found\n", node->name);
- if (match)
- drm_of_component_match_add(dev, match, dev_match_of,
- node);
- of_node_put(node);
- count++;
- }
- if (count > 1) {
- dev_err(dev, "Only one external encoder is supported\n");
- return -EINVAL;
+ if (of_device_is_compatible(node, "nxp,tda998x")) {
+ if (match)
+ drm_of_component_match_add(dev, match,
+ dev_match_of, node);
+ ret = 1;
+ }
+
+ of_node_put(node);
+ if (count++ > 1) {
+ dev_err(dev, "Only one port is supported\n");
+ return -EINVAL;
+ }
}
- return count;
+ return ret;
}
@@ -18,8 +18,9 @@
#ifndef __TILCDC_EXTERNAL_H__
#define __TILCDC_EXTERNAL_H__
-int tilcdc_add_external_encoders(struct drm_device *dev);
-void tilcdc_remove_external_encoders(struct drm_device *dev);
+int tilcdc_add_component_encoder(struct drm_device *dev);
+void tilcdc_remove_external_device(struct drm_device *dev);
int tilcdc_get_external_components(struct device *dev,
struct component_match **match);
+int tilcdc_attach_external_device(struct drm_device *ddev);
#endif /* __TILCDC_SLAVE_H__ */
Adds drm bride support for attaching drm bridge drivers to tilcdc. The decision whether a video port leads to an external encoder or bridge is made simply based on remote device's compatible string. The code has been tested with BeagleBone-Black with and without BeagleBone DVI-D Cape Rev A3 using ti-tfp410 driver. Signed-off-by: Jyri Sarha <jsarha@ti.com> --- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 11 +- drivers/gpu/drm/tilcdc/tilcdc_drv.h | 5 +- drivers/gpu/drm/tilcdc/tilcdc_external.c | 260 +++++++++++++++++++++++-------- drivers/gpu/drm/tilcdc/tilcdc_external.h | 5 +- 4 files changed, 207 insertions(+), 74 deletions(-)