diff mbox series

[v1,1/6] drm/panel: st7703: Use dev_err_probe

Message ID 85b58da3eb68b81c1bdf7fc2f4a38b1f9ad8c90a.1605635248.git.agx@sigxcpu.org (mailing list archive)
State New, archived
Headers show
Series drm/panel: mantix and st7703 fixes and additions | expand

Commit Message

Guido Günther Nov. 17, 2020, 5:49 p.m. UTC
Less code and easier probe deferral debugging.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 24 +++++++------------
 1 file changed, 8 insertions(+), 16 deletions(-)

Comments

Linus Walleij Nov. 17, 2020, 8:35 p.m. UTC | #1
On Tue, Nov 17, 2020 at 6:49 PM Guido Günther <agx@sigxcpu.org> wrote:

> Less code and easier probe deferral debugging.
>
> Signed-off-by: Guido Günther <agx@sigxcpu.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index b30510b1696a..a2c303e5732c 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -530,10 +530,8 @@  static int st7703_probe(struct mipi_dsi_device *dsi)
 		return -ENOMEM;
 
 	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
-	if (IS_ERR(ctx->reset_gpio)) {
-		dev_err(dev, "cannot get reset gpio\n");
-		return PTR_ERR(ctx->reset_gpio);
-	}
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), "Failed to get reset gpio\n");
 
 	mipi_dsi_set_drvdata(dsi, ctx);
 
@@ -545,19 +543,13 @@  static int st7703_probe(struct mipi_dsi_device *dsi)
 	dsi->lanes = ctx->desc->lanes;
 
 	ctx->vcc = devm_regulator_get(dev, "vcc");
-	if (IS_ERR(ctx->vcc)) {
-		ret = PTR_ERR(ctx->vcc);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to request vcc regulator: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(ctx->vcc))
+		return dev_err_probe(dev, PTR_ERR(ctx->vcc), "Failed to request vcc regulator\n");
+
 	ctx->iovcc = devm_regulator_get(dev, "iovcc");
-	if (IS_ERR(ctx->iovcc)) {
-		ret = PTR_ERR(ctx->iovcc);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to request iovcc regulator: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(ctx->iovcc))
+		return dev_err_probe(dev, PTR_ERR(ctx->iovcc),
+				     "Failed to request iovcc regulator\n");
 
 	drm_panel_init(&ctx->panel, dev, &st7703_drm_funcs,
 		       DRM_MODE_CONNECTOR_DSI);