| Message ID | SN6PR06MB534253E1CFDEA6917230F57BA57A9@SN6PR06MB5342.namprd06.prod.outlook.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/panel: add rotation support for Elida KD35T133 panels | expand |
Am Freitag, dem 02.04.2021 um 15:48 -0500 schrieb Chris Morgan: > Update the panel to allow setting the rotation value in device tree. > Tested on an Odroid Go Advance, where the panel is by default rotated 270 > degrees. > > Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> > --- > drivers/gpu/drm/panel/panel-elida-kd35t133.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c > index bc36aa3c1123..d8534406d1ef 100644 > --- a/drivers/gpu/drm/panel/panel-elida-kd35t133.c > +++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c > @@ -42,6 +42,7 @@ struct kd35t133 { > struct gpio_desc *reset_gpio; > struct regulator *vdd; > struct regulator *iovcc; > + enum drm_panel_orientation orientation; > bool prepared; > }; > > @@ -216,6 +217,7 @@ static int kd35t133_get_modes(struct drm_panel *panel, > connector->display_info.width_mm = mode->width_mm; > connector->display_info.height_mm = mode->height_mm; > drm_mode_probed_add(connector, mode); > + drm_connector_set_panel_orientation(connector, ctx->orientation); > > return 1; > } > @@ -258,6 +260,12 @@ static int kd35t133_probe(struct mipi_dsi_device *dsi) > return ret; > } > > + ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation); > + if (ret < 0) { > + dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret); > + return ret; > + } > + > mipi_dsi_set_drvdata(dsi, ctx); > > ctx->dev = dev;
On Fri, 2 Apr 2021 15:48:47 -0500, Chris Morgan wrote: > Update the panel to allow setting the rotation value in device tree. > Tested on an Odroid Go Advance, where the panel is by default rotated 270 > degrees. Applied, thanks! [1/1] drm/panel: add rotation support for Elida KD35T133 panels commit: 610d9c311b1387f8c4ac602fee1f2a1cb0508707 Best regards,
diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c index bc36aa3c1123..d8534406d1ef 100644 --- a/drivers/gpu/drm/panel/panel-elida-kd35t133.c +++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c @@ -42,6 +42,7 @@ struct kd35t133 { struct gpio_desc *reset_gpio; struct regulator *vdd; struct regulator *iovcc; + enum drm_panel_orientation orientation; bool prepared; }; @@ -216,6 +217,7 @@ static int kd35t133_get_modes(struct drm_panel *panel, connector->display_info.width_mm = mode->width_mm; connector->display_info.height_mm = mode->height_mm; drm_mode_probed_add(connector, mode); + drm_connector_set_panel_orientation(connector, ctx->orientation); return 1; } @@ -258,6 +260,12 @@ static int kd35t133_probe(struct mipi_dsi_device *dsi) return ret; } + ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation); + if (ret < 0) { + dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret); + return ret; + } + mipi_dsi_set_drvdata(dsi, ctx); ctx->dev = dev;
Update the panel to allow setting the rotation value in device tree. Tested on an Odroid Go Advance, where the panel is by default rotated 270 degrees. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> --- drivers/gpu/drm/panel/panel-elida-kd35t133.c | 8 ++++++++ 1 file changed, 8 insertions(+)