diff mbox series

[v3,098/105] drm/vc4: hdmi: Remove register dumps in enable

Message ID b18fa139a3d96c334954175748efbc656d6c53fc.1590594512.git-series.maxime@cerno.tech (mailing list archive)
State New, archived
Headers show
Series drm/vc4: Support BCM2711 Display Pipeline | expand

Commit Message

Maxime Ripard May 27, 2020, 3:49 p.m. UTC 
The current code has some logic, disabled by default, to dump the register
setup in the HDMI controller.

However, since we're going to split those functions in multiple, shorter,
functions that only make sense where they are called in sequence, keeping
the register dump makes little sense.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 17 -----------------
 1 file changed, 17 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 5ad983ce87d1..4b23d589377a 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -430,7 +430,6 @@  static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
 	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
 	struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
-	bool debug_dump_regs = false;
 	unsigned long pixel_rate, hsm_rate;
 	int ret;
 
@@ -489,14 +488,6 @@  static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
 	if (vc4_hdmi->variant->phy_init)
 		vc4_hdmi->variant->phy_init(vc4_hdmi, mode);
 
-	if (debug_dump_regs) {
-		struct drm_printer p = drm_info_printer(&vc4_hdmi->pdev->dev);
-
-		dev_info(&vc4_hdmi->pdev->dev, "HDMI regs before:\n");
-		drm_print_regset32(&p, &vc4_hdmi->hdmi_regset);
-		drm_print_regset32(&p, &vc4_hdmi->hd_regset);
-	}
-
 	HDMI_WRITE(HDMI_VID_CTL, 0);
 
 	HDMI_WRITE(HDMI_SCHEDULER_CONTROL,
@@ -522,14 +513,6 @@  static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
 
 	HDMI_WRITE(HDMI_FIFO_CTL, VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N);
 
-	if (debug_dump_regs) {
-		struct drm_printer p = drm_info_printer(&vc4_hdmi->pdev->dev);
-
-		dev_info(&vc4_hdmi->pdev->dev, "HDMI regs after:\n");
-		drm_print_regset32(&p, &vc4_hdmi->hdmi_regset);
-		drm_print_regset32(&p, &vc4_hdmi->hd_regset);
-	}
-
 	HDMI_WRITE(HDMI_VID_CTL,
 		   HDMI_READ(HDMI_VID_CTL) |
 		   VC4_HD_VID_CTL_ENABLE |