@@ -32,6 +32,8 @@
#include <drm/drm_print.h>
#include <drm/drm_probe_helper.h>
+#include <sound/hdmi-codec.h>
+
#include <video/display_timing.h>
#include "anx7625.h"
@@ -152,6 +154,20 @@ static int anx7625_write_and(struct anx7625_data *ctx,
return anx7625_reg_write(ctx, client, offset, (val & (mask)));
}
+static int anx7625_write_and_or(struct anx7625_data *ctx,
+ struct i2c_client *client,
+ u8 offset, u8 and_mask, u8 or_mask)
+{
+ int val;
+
+ val = anx7625_reg_read(ctx, client, offset);
+ if (val < 0)
+ return val;
+
+ return anx7625_reg_write(ctx, client,
+ offset, (val & and_mask) | (or_mask));
+}
+
static int anx7625_config_bit_matrix(struct anx7625_data *ctx)
{
int i, ret;
@@ -1324,6 +1340,9 @@ static int anx7625_parse_dt(struct device *dev,
else
DRM_DEV_DEBUG_DRIVER(dev, "found MIPI DSI host node.\n");
+ if (of_property_read_bool(np, "analogix,audio-enable"))
+ pdata->audio_en = 1;
+
ret = drm_of_find_panel_or_bridge(np, 1, 0, &panel, NULL);
if (ret < 0) {
if (ret == -ENODEV)
@@ -1394,6 +1413,208 @@ static enum drm_connector_status anx7625_sink_detect(struct anx7625_data *ctx)
connector_status_disconnected;
}
+static int anx7625_audio_hw_params(struct device *dev, void *data,
+ struct hdmi_codec_daifmt *fmt,
+ struct hdmi_codec_params *params)
+{
+ struct anx7625_data *ctx = dev_get_drvdata(dev);
+ int wl, ch, rate;
+ int ret = 0;
+
+ if (fmt->fmt != HDMI_DSP_A) {
+ DRM_DEV_ERROR(dev, "only supports DSP_A\n");
+ return -EINVAL;
+ }
+
+ DRM_DEV_DEBUG_DRIVER(dev, "setting %d Hz, %d bit, %d channels\n",
+ params->sample_rate, params->sample_width,
+ params->cea.channels);
+
+ ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
+ AUDIO_CHANNEL_STATUS_6,
+ ~I2S_SLAVE_MODE,
+ TDM_SLAVE_MODE);
+
+ /* Word length */
+ switch (params->sample_width) {
+ case 16:
+ wl = AUDIO_W_LEN_16_20MAX;
+ break;
+ case 18:
+ wl = AUDIO_W_LEN_18_20MAX;
+ break;
+ case 20:
+ wl = AUDIO_W_LEN_20_20MAX;
+ break;
+ case 24:
+ wl = AUDIO_W_LEN_24_24MAX;
+ break;
+ default:
+ DRM_DEV_DEBUG_DRIVER(dev, "wordlength: %d bit not support",
+ params->sample_width);
+ return -EINVAL;
+ }
+ ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
+ AUDIO_CHANNEL_STATUS_5,
+ 0xf0, wl);
+
+ /* Channel num */
+ switch (params->cea.channels) {
+ case 2:
+ ch = I2S_CH_2;
+ break;
+ case 4:
+ ch = TDM_CH_4;
+ break;
+ case 6:
+ ch = TDM_CH_6;
+ break;
+ case 8:
+ ch = TDM_CH_8;
+ break;
+ default:
+ DRM_DEV_DEBUG_DRIVER(dev, "channel number: %d not support",
+ params->cea.channels);
+ return -EINVAL;
+ }
+ ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
+ AUDIO_CHANNEL_STATUS_6, 0x1f, ch << 5);
+ if (ch > I2S_CH_2)
+ ret |= anx7625_write_or(ctx, ctx->i2c.tx_p2_client,
+ AUDIO_CHANNEL_STATUS_6, AUDIO_LAYOUT);
+ else
+ ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client,
+ AUDIO_CHANNEL_STATUS_6, ~AUDIO_LAYOUT);
+
+ /* FS */
+ switch (params->sample_rate) {
+ case 32000:
+ rate = AUDIO_FS_32K;
+ break;
+ case 44100:
+ rate = AUDIO_FS_441K;
+ break;
+ case 48000:
+ rate = AUDIO_FS_48K;
+ break;
+ case 88200:
+ rate = AUDIO_FS_882K;
+ break;
+ case 96000:
+ rate = AUDIO_FS_96K;
+ break;
+ case 176400:
+ rate = AUDIO_FS_1764K;
+ break;
+ case 192000:
+ rate = AUDIO_FS_192K;
+ break;
+ default:
+ DRM_DEV_DEBUG_DRIVER(dev, "sample rate: %d not support",
+ params->sample_rate);
+ return -EINVAL;
+ }
+ ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
+ AUDIO_CHANNEL_STATUS_4,
+ 0xf0, rate);
+ ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
+ AP_AV_STATUS, AP_AUDIO_CHG);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "IO error : config audio.\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void anx7625_audio_shutdown(struct device *dev, void *data)
+{
+ DRM_DEV_DEBUG_DRIVER(dev, "stop audio\n");
+}
+
+static int anx7625_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
+ struct device_node *endpoint)
+{
+ struct of_endpoint of_ep;
+ int ret;
+
+ ret = of_graph_parse_endpoint(endpoint, &of_ep);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * HDMI sound should be located at external DPI port
+ * Didn't have good way to check where is internal(DSI)
+ * or external(DPI) bridge
+ */
+ return 0;
+}
+
+static void
+anx7625_audio_update_connector_status(struct anx7625_data *ctx,
+ enum drm_connector_status status)
+{
+ if (ctx->plugged_cb && ctx->codec_dev) {
+ ctx->plugged_cb(ctx->codec_dev,
+ status == connector_status_connected);
+ }
+}
+
+static int anx7625_audio_hook_plugged_cb(struct device *dev, void *data,
+ hdmi_codec_plugged_cb fn,
+ struct device *codec_dev)
+{
+ struct anx7625_data *ctx = data;
+
+ ctx->plugged_cb = fn;
+ ctx->codec_dev = codec_dev;
+ anx7625_audio_update_connector_status(ctx, anx7625_sink_detect(ctx));
+
+ return 0;
+}
+
+static const struct hdmi_codec_ops anx7625_codec_ops = {
+ .hw_params = anx7625_audio_hw_params,
+ .audio_shutdown = anx7625_audio_shutdown,
+ .get_dai_id = anx7625_hdmi_i2s_get_dai_id,
+ .hook_plugged_cb = anx7625_audio_hook_plugged_cb,
+};
+
+static void anx7625_unregister_audio(struct anx7625_data *ctx)
+{
+ struct device *dev = &ctx->client->dev;
+
+ if (ctx->audio_pdev) {
+ platform_device_unregister(ctx->audio_pdev);
+ ctx->audio_pdev = NULL;
+ }
+
+ DRM_DEV_DEBUG_DRIVER(dev, "unbound to %s", HDMI_CODEC_DRV_NAME);
+}
+
+static int anx7625_register_audio(struct device *dev, struct anx7625_data *ctx)
+{
+ struct hdmi_codec_pdata codec_data = {
+ .ops = &anx7625_codec_ops,
+ .max_i2s_channels = 8,
+ .i2s = 1,
+ .data = ctx,
+ };
+
+ ctx->audio_pdev = platform_device_register_data(dev,
+ HDMI_CODEC_DRV_NAME,
+ PLATFORM_DEVID_AUTO,
+ &codec_data,
+ sizeof(codec_data));
+
+ if (IS_ERR(ctx->audio_pdev))
+ return IS_ERR(ctx->audio_pdev);
+
+ DRM_DEV_DEBUG_DRIVER(dev, "bound to %s", HDMI_CODEC_DRV_NAME);
+
+ return 0;
+}
+
static int anx7625_attach_dsi(struct anx7625_data *ctx)
{
struct mipi_dsi_device *dsi;
@@ -1958,6 +2179,9 @@ static int anx7625_i2c_probe(struct i2c_client *client,
DRM_MODE_CONNECTOR_DisplayPort;
drm_bridge_add(&platform->bridge);
+ if (platform->pdata.audio_en)
+ anx7625_register_audio(dev, platform);
+
DRM_DEV_DEBUG_DRIVER(dev, "probe done\n");
return 0;
@@ -1986,6 +2210,9 @@ static int anx7625_i2c_remove(struct i2c_client *client)
anx7625_unregister_i2c_dummy_clients(platform);
+ if (platform->pdata.audio_en)
+ anx7625_unregister_audio(platform);
+
kfree(platform);
return 0;
}
@@ -111,6 +111,7 @@
#define AUDIO_CHANNEL_STATUS_6 0xd5
#define TDM_SLAVE_MODE 0x10
#define I2S_SLAVE_MODE 0x08
+#define AUDIO_LAYOUT 0x01
#define AUDIO_CONTROL_REGISTER 0xe6
#define TDM_TIMING_MODE 0x08
@@ -365,6 +366,7 @@ struct anx7625_platform_data {
int intp_irq;
int is_dpi;
int mipi_lanes;
+ int audio_en;
int dp_lane0_swing_reg_cnt;
int lane0_reg_data[DP_TX_SWING_REG_CNT];
int dp_lane1_swing_reg_cnt;
@@ -385,6 +387,7 @@ struct anx7625_i2c_client {
struct anx7625_data {
struct anx7625_platform_data pdata;
+ struct platform_device *audio_pdev;
int hpd_status;
int hpd_high_cnt;
/* Lock for work queue */
@@ -393,6 +396,8 @@ struct anx7625_data {
struct anx7625_i2c_client i2c;
struct i2c_client *last_client;
struct s_edid_data slimport_edid_p;
+ struct device *codec_dev;
+ hdmi_codec_plugged_cb plugged_cb;
struct work_struct work;
struct workqueue_struct *workqueue;
char edid_block;